AZ BS Thread 4²0

I always forget how active this thread gets! I'm 5'9 she's 5'10

 

Yah, the house was built in 85 so people were smaller back then..... but yah it's only a 11k gallons so considered a play pool.

 

You forget that none of us fully pay attention to our work, you are correct.

 

Damn, mines even smaller.

6.5k gallons. Has a large seating area with a rock in the middle to hold drinks, a waterfall, and Jacuzzi jets on one of the seats. It has been great with the kids smaller, but as they are growing they want more room to play around in (that's why we have friends with pools).

 

I am suppose to be hanging lights on the house today, but the littlest is home with a fever and she is latched to my side right now, hard to climb a latter.

 

No I think they are the same height

 

don't know what you're talking about

 

still need to take you to Gilligans in old town

 

Who cares? I wouldn't stress it.

Just finals....

I'm pretty sure Sam is half inch shorter than me without our shoes on. With shoes on, I'm taller.

 

I am hoping to get them hung if she naps. However Gwennie isn't much of a napper/sleeper, if it was Harper, she would sleep all day while I ran power tools and such.

Luckily, lights only take an hour or so. Power was run years ago with a photo sensor and hooks every two feet. Last year I upgraded to two 50ft LED strands.

 

WSWS 3-Layer Half Height Increase Taller Insole Shoes Pad Air Cushion for Men (Approximately 2.5"es)

https://www.amazon.com/WSWS-3-Layer-Increase-Cushion-approximately/dp/B005JQYKJW

 

Damn! I'm at around 30k gallons. 10 ft deep end and it's just plain large.

 

Yes sir. For live production with capability to record without addition equipment at 96k. most recording is only done at 44k

 

Yes sir!!!

 

Yah I committed to hanging hooks under the eave our first year so now I just run the string along and connect to a extension cord in the garage and bam done, took about 30mins this year, only have to use the ladder for one part. Hopefully next year I will have a couple outlets installed for outside and let me do a bit more decorating easily.

 

Gotcha. Are you just swapping the fluid and need a recharge, or are you changing the valving in them? If just swapping the fluid and throwing new seals on them, I would order the stuff and do it at home (find some youtube tutorials, then try to find someone local that has nitrogen and charge them, or take them to a shop down in the valley and charge them (off the truck, so take a separate vehicle). If you need a to change valving, then I would get with a shop down in the valley that can get the right shim stacks and seals and everything ahead of time, then drive down and have them do a same day rebuild on them.


Posted on my FB to see if anyone I know from the desert racing community knows anyone up that way to charge them.

 

Not sure what PSI you need, but most need 150-200 IIRC

 

That's what I did this year. Hooks ftw. Will definitely make it easier in coming years

 

@snowboard704 Give SDHQ a call again if you can't find something local. I had asked on FB and someone tagged Dan from there in the post. He said:

So I would call back and talk to him or to Cliff and just explain to them that you are driving down from flagstaff to either
A) get the serviced and recharged
B) get them charged

and that you need it done same day somehow.


Alternately, I will be passing through Flag next Thursday sometime, possibly friday. I can pick them up and drop them off for you at SDHQ for you if you need to come back down another day and pick them up.