Brightest HID's

Hello new to the forum, and looking for the brightest HID's at a 6000K

 

Welcome to TW. You do realize the HIDs are not compatible with your halogen reflector headlight housings? They will scatter light everywhere. You need a full projector retrofit to do it correctly, plenty of vendors on the forum sell them, but cost is roughly $1k for a decent set.

 

This !!!

But... Welcome to TW!!!

Let's see some pics of your Rig!

 

TW discount on a retrofit kit means you can install projectors for about $225 all said and done. There's a link to the GB info in my signature too.

 

Team - thanks for the info great stuff to know. No pics as it's still stock.

 

I was looking, but is the OP a second gen or third? If he is a third gen then he might be ok with the stock projectors.

Coot

 

I'm a 2nd gen 2011

 

Thanks for the clarification. Depends on what you want to do, but as others have said the reflective housing in the OEM lights will be blinding without projectors. I ordered some Anzo lights that had projectors in them partly because I wanted HIDs. While I like the looks of these lights, found out the projectors in them are shit. I ended up going with the retrofit source and did the retrofit myself with their morimoto HIDs and projectors. If you are willing to learn how to do your lights on your own then I would hit up @TRSAndrew as they are the pros with stuff and have dealt with a lot of our tacos before. In case you arnt familiar with morimoto stuff, they are weatherproof, completely modular components, and are affordable considering what you get.

You can also go the route to get these lights professionally made by other light folks on this forum. If you want to check out what is involved, I have a link in my sig of my process in doing the retrofit. Its not as scary as people think.

Coot

 

The link in sig is only for fogs?

 

Nevermind

I need to learn to read....