5100 with what AAL?

I have 5100's waiting to be installed and I am going to set them at 2.5 inches. Which add a leaf should I go for to level it out? The Toytec 1.5" or the 2.0"? I have searched but it is hard to tell if the pictures most people are posting are with or without the TSB. I do not have the TSB so I am thinking the 2.0" one would work best and leave me just a slight rake. I will be installing them with the factory TRD offroad shocks in the rear. Thanks

 

Nobody has any pictures with a 2 in toytec add a leaf?

 

i think the 1.5 aal will do the trick. or..have the tsb leafs installed

 

I've gotta 1.5" AAL with my no TSB...

 

Are you running the 5100's in the front at 2.5? Thanks

 

i believe Scotty has a 3" strut spacer w/LR uca's.

 

http://www.tacomaworld.com/forum/2nd-gen-tacomas/71033-pics-my-truck-after-lift.html

i have 3 inches up front and 1.5 in back, it looks more like 2 in the back though.

 

Thanks. I think I'm gonna go with the 1.5 in the rear and the front at 2.5". I'll probably wait until i kill the factory rear shocks before upgrading them to the 5100's.

 

i just went ahead and got the 1500 pack at dsm for like 280 bucks

 

check with toytec if that's where you get the aal. from past conversations I had with Darrick @ toytec, the aals are specific to the leaf pack you have. If you had the tsb done, the 2" aal doesn't fit, I believe. If you have the 3 leaf pack, a 2" aal will fit.

 

they told me that the 2'' or l.5'' tsb aal would fit, i got the 1.5 even though i dont have the tsb done.

 

They told me that both would work but to go with 1.5 to level it out with the highest setting on the 5100's. I might just go with the 2" ones and keep a little rake. Are there any other disadvantages to running the stock shocks besides a rougher ride?

 

Well I just sucked it up and ordered the 2 in add a leaf from ToyTec. Thinking about ordering the 5100s for the rear too from wheelers offroad but still on the fence about doing it now or later. I think I'm going to see how it performs without them first as I won't be doing a lot of wheeling.

 

get the 5100 set from dsm you will get a discount

 

I already have the fronts... I think I'm going to pick up the rear ones down the road a bit. I'll take pics when its all installed

 

ok cool are you using the stock coil.

 

Billys at 2.5 and a 1.5 AAL... I think to would be to much front rake (stink Bug) look....

 

i have 3 up front and 1.5 im rear and it was nose high but now its level.

 

Your truck looks pretty level like that. I think it will end up looking about like factory as far as the rake goes... Just higher.