35x12.50 on my tacoma

Well guys im thinking about doing some crazy thing, im want to put on the bf goodrich km2 35x12.50 on my taco with my 17s, but im still trhinking about buying the fenders from "Glasswork Unlimited" or modify the orginal ones by cutting them but only from the inside.

Im also thinking about lowering the coilovers from 1 to 1.5inch and put my old 2inch lift spacer so i can have a 3.5 or even 4inch lift

well here are 2 pics with some 35x12.50 tires and 15inch wheel and some other 2 of how i have it right know (by the way i still cant figure how to do the big mode pics jajaj, im such a dork)

 

good luck, even with a 6" lift you have to do ALOT of trimming.

 

first take your camera off macro.

 

Yeah i know, in case that i have to do a LOT of trimming i will get the fibers glass fenders

 

so your total lift would be 4".... does your tires rub now..?

 

I was told that a 16" wheel was the smallest you could go on a 2nd generation Tacoma?

 

You are right! The calliper wont allow any smaller than 16, i just mounted them as best i could and besides the truck its mounted on a hydraulic cat, or whoever u call them ...

 

Damn that sucks man!! Now what?

 

U mean the 35s? i just mounted the wheel i didnt try to turn with them, but they dont rub with the upper arm (camburg), if that was what u meant!

 

Those wheels and tires (the 15s and 35s) are from a friends truck, if i go all the way with my idea, i will put the 35s on my 17s.

But for acomplish it, i have to sell first the km2 that i have right now and my old trd wheels

 

Oh okay got yah. I'm sure you wont have any trouble selling your km2's on here. Mind if I ask what size they are and what tire and tire size you are running?

 

Oh believe me...those tires are going to rub..no doubt about it. You wont be making any U turns thats for sure. I don't recommend putting a tire that large if your not doing any type of lift suspension..your going to be bottoming out very easily. Lift the truck...get your flared fenders..then put 35' tires on it.

 

ummmm i think your forgetting about something else REGEARING is going to cost alot also. should run at least 4.88 with 35s

 

i already have the fox coilovers, and the camburg uper arms

 

people run 35s with stock gearing all the time, its bad on the trans but it will work fine until he gets funds. Also i think 4.56 is sufficient for 35s

 

trans and gas mileage has got to suck

 

I dont have the exavt word to translate, sorry, but i changed the "diferrential"? to a 430

 

285/70/17, theyre mounted on a 17x9 procomp wheel

The problem that i would have selling them is that im living in Guadalajra Mexico and shipping to another country is a pain in the but!

 

a few people have 35s with 1-3in lift on ttora, even a guy with 36+

needs the right offset and backspace, the right wheel position and sometimes bumpstops.

I plan on going to 35s this year

 

Im working on those things u mentioned and If you go on those 35`s let me know