CLOSED - Apex Fabworks and Cali Raised LED Black Friday Group Buy - CLOSED

Thanks for the replies @OhioTaco68!!!!

@Nashwaak1 I can help you two ways.

First you can send me your address and I can mail you an instruction packet that has the hardware you need and the instructions, free of charge. I can mail on 27 December.

Or if your in a rush send me your email and I can email you the instructions. The hardware is as follows:

2 ea - M6x1.0, 16mm long - stainless
2 ea - M6 lock washer - stainless
2 ea - M6 oversized flat washer - stainless

 

@Nashwaak1 told you he'd take care of you, Chris is a prime example of some of the great vendors that are part of this forum .. lots of great folks here and eager to help

~ AWESOME ~​

 

Thank you!!!! And thanks for helping out others yourself!!!

 

Never doubted the service from MojaveMadman

I don't want you to occur any cost so I should be able to pick up the bolts at a local store. Thanks for the info on the bolt sizes and I'll pm you my email for the instructions that you include.

Very excited to get your mounts and the light from CaliRaised on my truck, to show it off to some friends in the area with Tacomas. I'll be sure to tell them to contact you.

Merry Christmas!

 

Got the light bar installed (but not wired) today. I did apply power and aim it, and I gotta say- this sucka is bright!


I'll wire it either tomorrow or Monday. Night time pics after

 

Love the yellow!

 

Thanks. It's sort of a "theme":

 

Mounted my bar last week. Just got a mictuning switch installed yesterday. Just need to get an add a fuse for running lights. I did not get a chance to aim mine yet, but is pointed pretty good for guessing. Sorry no night shots yet. Thanks for the great product.

 

@MojaveMadman Are people re-installing the air dams? I am having trouble getting mine to go back in. I know I have seen some videos about cutting them.

Thanks!

 

Gotta cut them as the instructions say to and then they go right in.

 

I cut per instructions and the bottom air dam mount is hitting the light bar mount. Trimmed more and still hits. Might try 1 more time but for now just left them off. Almost looks like I'll have to cut off the bottom of the air dam.

 

Text me pics 661-754-2061. Don't cut more yet.

 

I can on wedn or this weekend when I dont work. Work days I leave when its dark and get home when its dark. usually to tired to mess around with the truck in the dark. I was going to mess with them either wedesday or saturday, supposed to be nice days to give me time to work on it.

 

Ya just let me know. Happy to help. I can probably identify things quick

 

Aghhh i only got the fogs.. all u folks having fun with ur installs and talking bout how bright everything is has me kickin myself

 

Thanks, I havent been to worried about it. 11+ hour days make me just take things slow on my free time to enjoy my self and rest my body. I was also waiting on a few things to finish the install of the wiring harness.

You can see my stealth bar at the next meet or Barnwell the 14th!

 

I didn't see anything in the instructions about how to cut it. Just said trim to fit. I cut everything off below the lowest plastic pin that slides into the metal. The light bar mounts basically fill the gap for what is cut off. Good enough for me! I am going to try and route the harness tomorrow. Had to plug it in of course and try it!

 

For 3rd gen only. Step 3 in you instructions!

 

I think I see where I cut different from the instructions you posted. Thought I followed the instructions you sent me but I seem to have misplaced them to check. I'll re-cut to the right spot and expect to have no problems.

 

Would any of you 3rd gen guys mind posting a photo of where on the firewall you ran your wiring harness through?