RCI Offroad Bed Rack

This rack + RTT is pretty well lined up with most roof racks I'd say if that helps

 

How heavy is this rack?

 

Added my old Front Runner rack to mine to make it easier to mount an Awning, etc.

 

I think this is a solid rack, I ordered one for a longbed and will post on it when I return from Afghanistan.. it and my new RTT are sitting in the garage taking up a bunch of space.. My only regret is that I didn't wait to order until black Friday.... I ordered about a week before and it still got delivered 23 Dec! I'll be combining this with a frontrunner rack special design for a access cab.. I'm hoping the front rack sits pretty flush with the RTT because of the RCI's lower profile.

 

The top of the RTT will sit about 4" higher than the cab rack.

 

That works, I plan on having some low profile pelicans on the roof rack for limited use items.. so that should flush it up for a nice appearance

 

how are you guys mounting stuff? holes arent lined up for rotopax on mine..also interested to see how you put maxtracks on the side

 

Working on the maxtrax mounting but I drilled holes as needed for my rotopax. I'll post up a pic later.

 

Rotopax mounted...

 

Drilled holes for the Rotopax and for the Quick Fists

 

Maxtrax mounted to the RCI bedrack... if you don't mind cutting on $300 pieces of plastic this is what I ended up doing. Still need to do a little cleanup it's the dremel tool but it seems plenty sturdy... will test it out this weekend.

 

What kind of bolt combination did you use to mount your quick fist holding the shovel?

 

Are you able to do single rotopax without drilling or need to even for that?

 

Yea that's no problem.

 

Oh good, well that's a start at least.

 

I picked up the quick fist kit that came with multiple mounts. I used what seems to be the medium size mount. As far as the bolts I just went to home depot and picked up some bolts that would fit through the quick fist mount hole along with some washers and nylon nuts.

 

yeah almost seems like the small cluster of holes was made for the roto mount. Just a recommendation mount the roto pax on the opposite side of how your tent opens if you put one on there. My tent does not open correctly without hitting the top of the roto. Ill have to switch the shovel and roto pax.

 

Does your bed cover leak with that set up?