50+ thread

He called me, that was probably his first mistake

 

LOL!!

 

Battery to fuse to relay. Jumper to the activation side. Output to lights. Ground to inside truck to switch to ground. Don't need to be keyed really. Power just hangs there unless you want them to shut off with key.

 

ROFLMAO

 

Chris are you going to run Rock lites ??

 

Everyone is calling everyone else. I don't get any phone calls. What the hell is that all about.?

 

it has the battery -tofuse-to relay, then the control wire to the switch is 3 wires to interior of truck. the ground wire from the relay i attached to the body with the mounting screw for the relay, then there's black and white wires running from the relay to the lights

 

LOL !!

 

not until i see i need them i'm keeping this pretty simple, the only other lighting i plan is led fogs and perhaps a pair of spots in the lower valance

 

I was in the garage and had Andy's number. Besides, you know i don't like to bother you with work related stuff unless i have no alternative



and i don't have your number

 

Calls to Canada are expensive

 

Used a lot of those chemicals to clean cement that held down tile on the decks and machinery flanges. Eat through a pair of those heavy green coveralls. Only gloves I ever saw might be a pair of electrician gloves, not worth stealing most likely the only pair on board. Remember when those chemicals were banned and my first thought was now what they hell are we supposed to use. Likely not the most intelligent thought.

 

Really there is a question there hmm let me call the guy who is about as grumpy as a bear who has had his ass sanded with 60 grit and might drive all the way down and kick my ass and NOT fix the truck or .. call just about anyone else hmmmm let me think LOL

Cypher

 

I keep my wiring simple ...

http://www.leashelectronics.com/main.sc

 

he's a teddy bear but maybe that's because i'm usaully at least as grumpy as he seems to be i just don't show it on here

 

yeah i thought that's what i was doing

 

ROFLMAO

 

Years ago I made my own harnesses.
Now, don't know what I would do.

 

I'm running their 40amp and 70 amp relay boards and their Big Dog fuse panel