NJ B.S. Thread

I think we are going to Davis, WV. Canaan Loop road. I havent been before, so i don't know what to expect.

Happen to have a link for those TREDs? Thats a good price

 

You should have seen the show they put on for us down in Maryland... Whole airplane hangar full of tools & demos. Pretty neat.
Flexvolt is exclusive to HD for at least 2017.

 

Hook a brother up

 

So I got this sexy bitch in the mail today. Going on my bed rack

 

Corporate HQ is in Baltimore. I need you and @Mobtown Offroad to get me the bare Flexvolt Chainsaw. I have batteries up to my eyeballs.

 

I still do not have an axe mounted on my rack due to an abundance of caution in case of road rage incident

 

@stairgod can you post the link to that black 4 port ARB compressor manifold that you got from ebay? I cant find it now

 

I leave my road rage at work.

 

I did not buy a manifold. Think it was @HolyHandGrenade ?

 

that black ebay one that has 4 ports? I am trying to piece together my parts now. I think I am not going to get a front locker, so I wont need that custom manifold for the solenoids?

 

http://www.ebay.com/itm/321966081822?_trksid=p2057872.m2749.l2649&ssPageName=STRK:MEBIDX:IT

 

also, happen to know the thread size of the port on the compressor? 1/4" or 3/8" ?

 

thank you!

 

Maybe not. But you will need a manifold for both 1/4" NPT and 1/8" BSP ports. Damn ARB solenoids use British thread

 

CQUOTE="fatfurious2, post: 14003725, member: 132884"]also, happen to know the thread size of the port on the compressor? 1/4" or 3/8" ?[/QUOTE]
compressor is 1/4" NPT

 

so the one coming off of the compressor is a 1/8" BSP, and Id need a conversion to something like a 1/4" ?

 

ARB solenoids are 1/8 BSP. I hope to god compressor is 1/4" NPT. Looked like it, but now I am wondering. Have not plumbed it yet

 

It is

 

compressor is 1/4" NPT[/QUOTE]

OK, I am going to get a 1/4" leader hose to move things away from the compressor, to the firewall or fender wall. Then I will continue with my plan for things. I started making my mount the other day, but need a support piece for underneath the mounting plate, because that compressor is damn heavy

 

[/QUOTE]OK, I am going to get a 1/4" leader hose to move things away from the compressor, to the firewall or fender wall. Then I will continue with my plan for things. I started making my mount the other day, but need a support piece for underneath the mounting plate, because that compressor is damn heavy[/QUOTE]
It is heavy. Viair sells leaders in various lengths with check valves. That's what used.