What Have You Done To Your 3rd Gen Today?

Setup?

 

A few weeks ago I decided to add 1/2" blocks under the leafs because the front was sitting a little higher , now it sits almost level and I'm happy with how the truck looks.
Somebody told me today that's not a good idea . He didn't give me any reasons why !
But I'm assuming 1/2" block is not gonna hurt anything right ?
Thoughts ...

 

Does anyone have and info or pictures of the resz light bar? It is a roof mount bar with 3 led light bars on it. Anything would be great. I just am curious how far it is away from the roof line and how it mounts. I don't want it to look funny up there. Thank you

 

Any suspension changes should have an alignment per manufacturer spec...but I can't imagine that 0.5" blocks under the rear is going to harm anything as long as everything is appropriately tightened/torqued to spec, and you haven't noted any changes in handling.

 

Truck drives the same , I can't tell any difference at all.
I talked with two different shops and they told me that I don't need to do an alignment.
Only if I add 1" or more ...
How do I know if is torqued to spec?

 

Looks like it sticks out [especially in the middle] "pretty far" to use some rough and inadequate measuring.

It also looks like it mounts via the roof rack rails/similar to the OEM roof rack and prinsu.

http://scontent.cdninstagram.com/t5...g?ig_cache_key=MTM1MzE4MDk1MDMxNzYzMjgwMA==.2

http://scontent.cdninstagram.com/t5...g?ig_cache_key=MTMwNzYyMjU0NDQyMDkxNTY2MQ==.2

 

I'm sure it's fine then. Depending on what you changed, some of the bolts are supposed to be retorqued to a specific number. Offhand, I can't tell you what but if it's just a spacer kit I'm sure it's either noted in the paperwork or non-important. Or both!

 

Its a Century top of the line model (Leer).Front window removable to clean the cab window. Has a light on the inside which is already led so i dont have to mod it. Heres the inside lit up. Camera flash was off!!

 

I paid 1,935 cash discount. I shopped around this was the best deal locally including install

 

Is this ... there is no paper work
Advertisers as a "lean shim"

 

I really like that. Any chance you got a part number?

 

Nothing at all wrong with doing what you did.

 

Thanks
I just don't trust car shops anymore
Too many bad experiences in the past

 

I dipped my grill a few weeks ago and love it!! So far, it has held up very well

 

Not gonna affect the differential? Or I'm gonna have to replace any bushings because the angle is different ?
I know they replaced the AAD bearing before when the put the leveling kit in the front ...

 

Never posted pics of the switchpros brain under the hood.. as I add more accessories and eliminate the extra pig tails, it'll just get even more clean

 

Thank you

 

How do you like the fab four front bumper?

 

Clean! I ordered a pelfreybilt tray for a fuse box but I'm thinking this may be the better way to go. Did you fab up that mounting plate?

 

That bumper is massive, how much does that thing weigh? Any pics from the front?

Is that winch bumper from Relentless? If so, how much cutting of the bumper is there?