What Have You Done To Your 3rd Gen Today?

Yeah and it def feels different and better .

 

Did you have the first tsb done?

 

Hey, @Starwoodtacoma007 where did you find those lights?

 

Honey they carry those at auto zone here.

 

Finished my Mid Plate Banana Republic look out.


3/16" Plate with a little 1/4" mixed in. Now I just need to do the Trans and T-Case skid, and Then Sliders EDIT: And redo fix the front skid

 

Can anyone tell me if the AC light is supposed to have the words light up or if it only lights up those little rectangles when you push it?

I was fixing my wires for my switch today (they'd been out of commission for a while because I needed to fix the one that makes it glow - it's tapped in to the bed light now). I'm worried I may have messed that one up somehow and I can't remember what it looked like before.

Image below has the low beams on and the AC button pushed.

 

Installed my Gibson cat back today

Fits perfect sounds great and 2.5 inch mandrel bend piping for no loss of torque but just a little more free flowing

Very impressed for only paying $209 for autoanything

 

Auto zone

 

Thanks, was trying to check them out myself, but couldn't find them.

 

I did like 4 months ago. Didn't do anything.
I just did the rev 1.
Seems to have fixed my two main problems, cruise control down n up shifting issues, and dedinetly shifts smoother from 1st to 2nd gear.

 

That switch never lit up for me other than the upper/lower lights, so I think that's normal.

 

How did you tie into the ignition and illumination wire? I'm having trouble locating those 2 wires to tie into.

 

This is on my list! Probably next month

 

Didn't tie to ignition, compressor works if the truck is running or not. Illumination for the switch was tapped off of a nearby factory switch, but it was too bright so I killed it. don't need light to know what my three aux switches are.

 

Worth it, first thing I add to any truck.

 

can't figure it out from the picture and their website but how does the mount connect to the vent?
what parts are needed?

EDIT: never mind, found the unholy dash mount!

 

I have no doubt about that! It's been on my list just wanted to get a few other things lined out and installed first. Namely the switchpro since that's what's gonna be controlling it. Do you plan to run a hose to an air chuck in the bed or just keep everything under the hood?

 

Awesome! Thanks. I was really worried I screwed something up in there

 

Got my hood struts mounted finally. Word to the wise. Use a good quality rivet gun. My pos came apart with one rivet left. Took an hour to find the spring and other pieces. Also pneumatic tool would be better on the hood side. Sucked working upside down. For those with a k&n Cai you must bend the rear wall or it interferes with the strut when closing hood. That was a nice added few minutes of unexpected work. Love the struts. Appreciate Toyota saving $70 per vehicle by letting us do the work.

 

Where did you get the bumper plugs from?