Colorado B.S. Thread

Bueller.... Lowers?

 

I'd like to be shown the way. Please don't key my truck @3378jakesr5

 

Say October? RT

 

Hahah plan for over nighter but hope its only a 3 hour event...

Stays within the three hour event every one gets an A

1-2 hours over B

2.0001-5 hours C

5.00001- 10 hours D

If you dont make it out.... welllll you should have stayed at the mall

 

I dont key. I park.

 

I would tell them im driving your car out if they are on my tracks.

 

80% lowers.

 

You get to show us all how to do it by hand.
Maybe with your teeth?

 

Also i have the jig so if you wanted to go that route you can come by and use it to mill it out.

 

Spinning can either build up heat and melt the tabs off, or get enough grip to just rip the tabs off. And I believe that Maxtrax will not warranty them if they are broken due to wheel spin.

Any type of vehicle you just want them to lightly touch the gas to get the tires to slowly spin to grab the tabs on the tracks.

Edit: Maxtrax Warranty:

 

That could work but in order to do that I'd need to know where you got them haha

 

I'll continue to requote you, they do not sell stripped but you can get stripped ones for cheap/some are cheaper then these are. But you are paying for quality

 

.........

 

If i knew how to spell i would spell it out for him.

 

Eighty percent kinetic lowers.

Remove one word.

 

I always use chains at work. It takes a lot to make them brake. But when they do depending on tthe length they fly chest high about 10 ft then after that they slide across the ground pretty fast. Yes chains are an eye opener when they brake but they are also to heavy so gravity dose draw that force downward. Unless its being pulled upward. But honestly, the weight of a chain in compared to a strap. A strap is way better.

 

Thank you!!! And ill take kynetic for Eaty pointz!!!