NW WA Meet / BS Thread

I wanna ride

 

Yeah, those BP51s are pretty slick. If I had a newer truck I'd strongly consider them.

 

No, second gen's are perfect!!

 

E rated toyo 33's and I think 80psi

 

Holy fuck theres your problem

 

Maybe not 80 I would have to check haha

 

Holy crap, seriously, drop those to 30!

 

I run mine at 35psi your running way to high

 

Then I have to be wrong. 80 would have them buldging. Ill check in a bit

 

Not in an E. You wouldn't see it visually, but they would ride like bricks.

 

They are 40psi. Sorry looked at the max load rating for E. Ill try dropping 5psi and see if it makes a difference.

 

HOLY FUCKIN SHIT

 

They go up that high so it's possible

 

I just stuck them with as pressure gauge. 39-40 and then re-read the tire. If they were 80 discount tire really would have screwed me.

 

In run 35 in front 37 in the back... I'm running plate bumpers, armor and winch.

 

I think more weight will make a difference before I look at changing anything up.

 

I have Icons front and back with the Icon AAL and I've found that even adding a couple 50# bags of sand in the bed makes a big difference. It seems to me like the roughness of the ride on road is more driven from the rear suspension than the coil overs anyway.

I have a RTT going on in the next couple months and hopefully a front and rear bumper to follow this summer so we will see how it goes after that. I have a feeling the AAL is going to need to be swapped out for something a little beefier.

 

i run my nitto trail grapplers E rated at 35-38. seems fine for me

 

The heavier the weight the more psi... I'd run 32 32 if I was running stock

 

So if you're at ~40psi COLD you're probably rolling around town at ~42psi.

Again, with a stock weight truck, and E rated tires.

My 4Runner weighs damn near 6000lbs, has D rated tires, and I run 38psi.