AR-15 BS Thread

$100, my bad.

 

I did see somewhere they were $49 on sale

 

I stirred up a huge debate by being cheap!

In all seriousness thanks for the recommendations.

Ill message you in a couple days @Mike330R if that's alright.

 

That BCM PNT trigger on sale for $49. Must be logged in to see this price:
https://dsgarms.com/bcm-pnt-ta1

 

Brownells had them over the weekend @ $49

 

And you just now telling us?

 

Just finished this build up. 9 inch 300 blackout pistol. Now to start my rifle build and plate carrier setup.

 

Sure looks that way!

 

copied from the funny picture thread

 

Not the same brand but same style;

VooDoo Tactical 15-7613007000 Padded Weapons Case, Coyote, 36"

https://www.amazon.com/gp/product/B0013H90NC/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1. VooDoo makes good stuff and I'm pretty happy with this.

 

Christmas presents put to use. Eventually I will probably have to convert to all steel as the 2x4 forgets all shot up!

 

My 17 HMR @ 200 yards and it's 6°, I'll take that !!!

 

How much does that setup run plates and hanger?

 

I actually have that VooDoo bag. I like it and find its worth it. I mostly keep it as my AR style gun bag. On pouch has AR-15 mags, the other LR-10 mags, and the middle holds the stapler most of the time. The actual inside holds two AR's (even my bigger AR-10) just fine. I have also fit other guns like a M1 Garand and 10/22 in there. The M1 is a tight fit. The other zippered area i keep a cleaning rod in and it can also fit another upper depending on barrel length. It does get heavy with everything in it. I havent used the backpack straps so no comment there. But the shoulder strap works fine. Its definitely large enough you could use it as your sole bag but i dont. I still use another bag for the ear muffs, ammo, ect and use the voodoo bag solely for rifles.

 

About $145sh. The 2 x 4 and the long poles were scavenged. The targets the square hangers and the square supports on the 2 x 4 are all AR 500 steel. I have 3 targets left over from what I bought.

TyCa Industries 2x4 Target Stand Brackets AR650 Armor Steel - Tougher Than AR500-250lb Capacity - Powdercoated

https://www.amazon.com/dp/B00VR6XL1...TF8&colid=32T9XQ34OSWRU&coliid=I1QCQ9KB9G05M7

http://www.ebay.com/itm/182323826161?_trksid=p2057872.m2749.l2649&ssPageName=STRK:MEBIDX:IT

http://www.ebay.com/itm/252533326745?_trksid=p2057872.m2749.l2649&ssPageName=STRK:MEBIDX:IT

http://www.ebay.com/itm/252546913895?_trksid=p2057872.m2749.l2649&ssPageName=STRK:MEBIDX:IT

http://www.ebay.com/itm/182147270378?_trksid=p2057872.m2749.l2649&ssPageName=STRK:MEBIDX:IT

This is also an all steel version and option

http://www.ar500-targets.com/Target-Stands-s/1820.htm

 

Took the AR out today after giving it a super thorough cleaning last week and it ran flawlessly. I tried to get it to fire when slowly releasing the trigger about 30 times and it did not malfunction once.

All I did was give the bolt and upper a super thorough cleaning, didn't do anything to the lower/trigger. Somehow it being so gummed up was causing the issue.

 

Glad it didn't malfunction but I don't see how it being dirty would cause a double fire.
It's usually something loose/twisting/out of spec.

 

I don't either but I don't know enough about it to figure out what went wrong. I try to be very meticulous about that kind of thing so I don't think I assembled it wrong before but it is possible.

 

What lower is that?