Factory fog light switch (price fixed) with pigtail in back, ARB compressor switch and ARB pig tail

Happy Friday TacomaWorld. I have a few things that are taking up space, and I need to fund the next project.

Item 1) Factory Toyota fog light switch for left of steering wheel. I will include the factory plug so you can run wires to it, or sell the plug if you wish. We currently have the pig tail for keyed 12 volt in, bridge the 12 out to the light so the light comes on when you turn the fog lights on and the ground. I would like $30 for this. I know it looks cracked, but it seems to just be a scuff.




Item 2) I also have the ARB Compressor switch that came with my new compressor. I decided to use a factory style switch to make things look a little more stock. How about $25?





Item 3) Bed boxes sold!

Item 4) Finally, the dash pig-tail for the ARB wiring harness. I decided to make my own harness.
How does $5 sound?



Of course shipping will be on the buyers dime. Paypal is accepted.

 

You could always build a power center with one of those boxes......

 

Ok, that is pretty sliffy! Almost tempted to keep one of the boxes now!

 

Bump

 

Now why would you go and post something like this? Now Im pretty sure Im gonna have to look into this!! Any chance you got a write up or any info available on what all you did there?

 

I might need a bed box for an Espar heater setup. Looks like your photo links are broken, can you PM me?

 

Bump for fixed photo links

 

yes! write-up! write-up!!

 

Been meaning to get a write-up on it. But with the ever-growing mountain of Stuff To Do, it might be a bit before I get to it.

 

@Iggy.

 

@Bentrodder showed me this a few days ago, nice work @Mach375!!

Two questions, on the out let did you use the wiring for the factory one, and is that a voltage monitor on the left?

 

Where Do you order the components to build this? It is a work of art!!! A Picasso if you will

 

Sorry for the thread jack OP! I think mach375 has made a hit with this power supply idea.

 

Just keep me in mind if you ever do one. If you dont mind I may pick your brain a little bit about some of this if I decide to try one.

 

Yup. Looks like the boxes are sole though. I will just create a new thread this weekend for the other stuff.

 

whats an espar heater?

 

http://lmgtfy.com/?q=espar+heater

 

Yes, I used the factory wiring for the 120vac. That is a combination digital selectable circuit breaker/volt meter/amp meter with auto/manual/off reset; that model is selectable 30 or 40 or 50 or 60 amp cutoff.

Most of it is off-the-shelf stuff at a local electronics store (if you're in SoCal, it's MarVac in Costa Mesa, near Triangle Square). Some of it (like the digital circuit breaker/meter) I got online from Amazon.
The plastic face is from a local plastic shop. The handles and outlet I got from Homey Despot. All cables and wire I had sitting around. Brass hardware is from a specialty hardware store (McFadden-Dale, for those in SoCal...Santa Ana).
Thanks!

Yeah. Sorry about that. I had a feeling this would be a threadjack. But hey, free bumpage, right?

No problem. Just don't be dependent on a fast response, as I'm not on TW all that often.
If you do tackle it, just take your time. Figure out what devices and connections you need and use, then plan space according to measurements. For the work, a Dremel tool will be your best friend.

 

Bump - three items left