Official Tennessee Thread

I Am man Ima bout dead tho I feel like a damn zombie

 

Yal play at singleton?

 

You moving here?

 

Possibly going to PA school there. Haven't heard anything from Wake Forest so I'm starting to plan for Knoxville.

 

Hell yea. At UT or another school?

 

Yeah, but this is my little boy, not me playing.

 

South College

 

I used to work there court B is the best court

 

To access the needle bearing in the front dif where driver side cv goes in, do i have to fully remove cv from truck? Or, can I just unbolt the LBJ to swing the whole spindle/hub assembly out to pop the end out of the dif?

Just a snapring holds it in dif right? Simple pull or small prybar?

 

I'd plan on removing the whole thing. You don't want to pull the CV ends out of socket, may be opening up a boot to reinstall bearings that way. Should pop/pry out with a little effort. I make dad noises to make it seem like harder work

 

I had to pull it all the way out since you can't bend the shaft hard enough to pop it out. That's why I now own a very large socket to take the axle out. Once out use a betting removal tool to pull the old one out and a set kit to put it back in. If your in Knoxville there is a master kit floating around the east Tn over landers that we have all bought.

 

Axle nut is 32mm or maybe 34mm, I know I have one in the truck but can't remember lol

 

Hopefully it's a 32mm cause I keep one of them in my truck.

 

Nothing like a big nut in the truck!

 

Almost positive it's 32mm

 

well... Its totaled...

 

Bummer...

 

Dang. Hope you do well on the insurance pay out.

 

who was it that is in the process of putting a locker in? i can't remember.