6'' lift what leafpack?

ok ive been searching but not sure what i need i am going to put a 6'' pro comp lift and instead of putting the aal and block i wanted to replace the leafs but i dont know what height i would need it lifted? without getting them custom made i saw allpro makes a 3'' pack and i saw the OEM pack with 2 1/2 lift. How much would i need to lift the back to make it level stance.

 

about 3.5 to 4




wait i think its 5 inches of lift

 

Check Krookz build, he got a custom set made. 3" wont be enough.

 

its 5 im sure of it now

 

so ill need a custom set made $$

 

yep i think deavers are around 550$ its on my list

 

ya i am prolly ganna just put the aal and block till i get some extra money

 

i might get the allpro leaf and block for a better ride

 

Its 5 " I just had alcan springs make me a custom set and it was 500.00 bucks...well worth the money

 

ya i was thinking about doing that getting leaf pack and putting the block on or would that be pointless

 

thats not bad what lift do you have?

 

well i think you can get a smaller block that way the aal is only about 1.5 inches of lift i think i would have to see how tall the block was

 

I have 886 coils on 5100 billies, camburg uca,s and 3" custom leaf pack. I ended up with 3 3/4 front lift and 3" on the back..Right now the truck sits at left front 38 1/2,right front 38 1/4, left rear just shy of 40 and right rear is 39 1/2...Truck rides perfect. i would call them and tell them what you want, some of the best people i have ever delt with..good luck.. All these numbers are with stock tires

 

All Pro makes 5" rear leaf packs match it with longer shackles to get the height. Or have some custom build by Alcans, Deavers.

 

He is a second gen he would need to get the shackle flip kit also, if he wanted longer shackles.

 

My bad they don't stock 5" for 05+...so I would call up Deavers or Alcans.

 

get the deaver pack and the shackle flip kit, I think the flip kit gives you about and inch and youll get better flexxxx

 

Just be aware that if you get a custom set made up you have to tell them exactly what you want. when i had mine built,i told them i wanted a full 3" of lift with a 300 lb extra load rating. when i put them on i ended up with the full 3' on the left side but only 2 3/4 on the right. if they settle down much more i will either order a new set of 4" or maybe go with a 1' block. and i,m not really keen on blocks....FYI. good luck

 

where would i be able to find the deaver pack?

 

there web site
http://www.deaverspring.com/