1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site
    Quick Links: Are Bilstein 5125 33-230337 the right shock for 1in rear block on 3rd gen TRD OR DCLB? Just Pulled the Trigger on the Lift... Fox 2.0 coilover needs rebuild Should I upgrade suspension for a move? Help me decide! Leaf pack questions..I know, I know.. Installing first lift this weekend couple questions

Maxtrac Spindle Lift for 2nd Gen Prerunners

Discussion in 'Suspension' started by markmatters, Feb 11, 2012.

Page 473 of 688
  1. Jan 18, 2017 at 10:59 PM
    #9441
    Tinymechanic

    #9441
    Tinymechanic Well-Known Member

    Joined:
    Dec 28, 2016
    Member:
    #205856
    Messages:
    59
    Gender:
    Male
    First Name:
    Tiny
    Vehicle:
    Lifted 2013 prerunner doublecab v6
    6.5 maxtrac / 20x12 rockstar 2's and 35" toyos.
    Snowbro

    IMG_8836.jpg
     
    Tinymechanic, Jan 18, 2017
    #9441
    White Horse, spiralout462 and SpruceTaco like this.
  2. Jan 19, 2017 at 4:28 AM
    #9442
    SpruceTaco

    #9442
    SpruceTaco トヨタ

    Joined:
    May 18, 2012
    Member:
    #79082
    Messages:
    12,271
    Gender:
    Male
    First Name:
    Mike
    Clearwater, FL
    Vehicle:
    2012 Spruce Mica TRD Sport
    Tinted windows 5%, sill protectors, TRD stubby antenna, weathertech in channel rain guards, wheathertech floor mats, BHLM, Truxedo low pro qt, DTRL deleted, anytime backup camera, bed storage locks, fog lights on anytime, tailgate theft deterrent, painted engine cover, relocated horns, l.e.d bed lights, l.e.d engine bay lights, l.e.d lights above cup holders, in glove box, rear cup holder, in console storage & cubby next to steering wheel, Grillcraft grill, 17x8.5 SCS Ray10's, 35x12.50 Nitto Ridge Grapplers, Borla cat back exhaust, map & dome l.e.d's, TEQ badge on grill, Redline tuning hood struts, Maxtrac spindles, SPC Light Racing UCA's, Bilstein 5100's front set at 0 with OME 885's & extended length Bilstein 5100's in the rear, All Pro expedition leaf springs & 2" blocks, extended brake lines front & rear, 1.5" 4crawler drive shaft spacer, Beefed Taco carrier bearing drop, 1.25" spidertrax wheel spacers on rear, Kenwood DNX570 touchscreen with navigation, 30" led light bar in lower bumper opening, 1/4" top plate spacer drivers side, Bullet Proof Fabricating skid plate, Cali Raised ditch lights & Rago f Fabrication brackets, Amp Research power steps, smoked l.e.d 3rd brake light, Wet Okole seat covers, under cab LED'S tied to dome circuit
    I was thinking you may want to take it back & let them check the alignment. The bolts weren't tight & the noise was lcas were moving. Possibly the alignment is off. Make sure they torque the bolts this time.
     
    SpruceTaco, Jan 19, 2017
    #9442
    ChadsPride likes this.
  3. Jan 19, 2017 at 4:28 AM
    #9443
    ChadsPride

    #9443
    ChadsPride Tacoma Owner & Enthusiast

    Joined:
    Nov 26, 2014
    Member:
    #143119
    Messages:
    127,312
    Vehicle:
    Sponsored by TacomaWorld.com
    :drool::drool::drool::drool::drool:​
     
    ChadsPride, Jan 19, 2017
    #9443
    Tinymechanic[QUOTED] likes this.
  4. Jan 19, 2017 at 3:25 PM
    #9444
    Fiend13

    #9444
    Fiend13 Well-Known Member

    Joined:
    Jul 3, 2012
    Member:
    #81853
    Messages:
    4,706
    Gender:
    Male
    First Name:
    Chad
    Waddell/Phoenix area
    Vehicle:
    08 TRD O/R DC Prerunner
    Just found a guy selling these spindles along with the hubs and wheel speed sensors close to my area for $250. They came off a 2012 Tacoma. My question is, what hardware do these come with brand new? Hardware isn't included with the used set. I know I'll extended brake lines. Anything else? Other question, I have eibach 5100's set at .085 so with the spindles that will give more lift than I want. What setting would y'all suggest in the bilsteins to keep the lift around 4.5-5"? I would like the ride to me a little softer and I'm keeping my 33's on. It would look funny with 7" lift and 33's lol
     
    Fiend13, Jan 19, 2017
    #9444
    ChadsPride likes this.
  5. Jan 19, 2017 at 3:42 PM
    #9445
    SpruceTaco

    #9445
    SpruceTaco トヨタ

    Joined:
    May 18, 2012
    Member:
    #79082
    Messages:
    12,271
    Gender:
    Male
    First Name:
    Mike
    Clearwater, FL
    Vehicle:
    2012 Spruce Mica TRD Sport
    Tinted windows 5%, sill protectors, TRD stubby antenna, weathertech in channel rain guards, wheathertech floor mats, BHLM, Truxedo low pro qt, DTRL deleted, anytime backup camera, bed storage locks, fog lights on anytime, tailgate theft deterrent, painted engine cover, relocated horns, l.e.d bed lights, l.e.d engine bay lights, l.e.d lights above cup holders, in glove box, rear cup holder, in console storage & cubby next to steering wheel, Grillcraft grill, 17x8.5 SCS Ray10's, 35x12.50 Nitto Ridge Grapplers, Borla cat back exhaust, map & dome l.e.d's, TEQ badge on grill, Redline tuning hood struts, Maxtrac spindles, SPC Light Racing UCA's, Bilstein 5100's front set at 0 with OME 885's & extended length Bilstein 5100's in the rear, All Pro expedition leaf springs & 2" blocks, extended brake lines front & rear, 1.5" 4crawler drive shaft spacer, Beefed Taco carrier bearing drop, 1.25" spidertrax wheel spacers on rear, Kenwood DNX570 touchscreen with navigation, 30" led light bar in lower bumper opening, 1/4" top plate spacer drivers side, Bullet Proof Fabricating skid plate, Cali Raised ditch lights & Rago f Fabrication brackets, Amp Research power steps, smoked l.e.d 3rd brake light, Wet Okole seat covers, under cab LED'S tied to dome circuit
    Thats a decent deal!
    They come with brake lines as you know, the hardware bag has a bunch of little nuts, bolt & cable clamps for the speed sensor wire, 2 big nuts & bolts along with washers that hold the spindle to the LCA. Someone was asking about the hardware & if it could be bought separately recently & they asked Marie @HeadStrong Off-Road but don't know what ever came of it.
    So you have Eibach springs on 5100's?
    If so the spring lifts 1.6" + .85 puts you at about 2.5" so even at 0 you'll be at 1.6 & with spindles you'd be at 5.6"
     
    SpruceTaco, Jan 19, 2017
    #9445
    HeadStrong Off-Road and ChadsPride like this.
  6. Jan 19, 2017 at 4:01 PM
    #9446
    Fiend13

    #9446
    Fiend13 Well-Known Member

    Joined:
    Jul 3, 2012
    Member:
    #81853
    Messages:
    4,706
    Gender:
    Male
    First Name:
    Chad
    Waddell/Phoenix area
    Vehicle:
    08 TRD O/R DC Prerunner
    Forgot about the lift from the springs. So with the springs, second notch on the bilsteins, and spindles, I'll basically be around 6-6.5" of lift. That's fine. I just want most of the lift to come from the spindles so I can get a little bit of ride quality back from my shocks. Hmm...I may just put them back at 0 and have it sit at 5.6". Thanks
     
    Fiend13, Jan 19, 2017
    #9446
    ChadsPride likes this.
  7. Jan 19, 2017 at 4:43 PM
    #9447
    SpruceTaco

    #9447
    SpruceTaco トヨタ

    Joined:
    May 18, 2012
    Member:
    #79082
    Messages:
    12,271
    Gender:
    Male
    First Name:
    Mike
    Clearwater, FL
    Vehicle:
    2012 Spruce Mica TRD Sport
    Tinted windows 5%, sill protectors, TRD stubby antenna, weathertech in channel rain guards, wheathertech floor mats, BHLM, Truxedo low pro qt, DTRL deleted, anytime backup camera, bed storage locks, fog lights on anytime, tailgate theft deterrent, painted engine cover, relocated horns, l.e.d bed lights, l.e.d engine bay lights, l.e.d lights above cup holders, in glove box, rear cup holder, in console storage & cubby next to steering wheel, Grillcraft grill, 17x8.5 SCS Ray10's, 35x12.50 Nitto Ridge Grapplers, Borla cat back exhaust, map & dome l.e.d's, TEQ badge on grill, Redline tuning hood struts, Maxtrac spindles, SPC Light Racing UCA's, Bilstein 5100's front set at 0 with OME 885's & extended length Bilstein 5100's in the rear, All Pro expedition leaf springs & 2" blocks, extended brake lines front & rear, 1.5" 4crawler drive shaft spacer, Beefed Taco carrier bearing drop, 1.25" spidertrax wheel spacers on rear, Kenwood DNX570 touchscreen with navigation, 30" led light bar in lower bumper opening, 1/4" top plate spacer drivers side, Bullet Proof Fabricating skid plate, Cali Raised ditch lights & Rago f Fabrication brackets, Amp Research power steps, smoked l.e.d 3rd brake light, Wet Okole seat covers, under cab LED'S tied to dome circuit
    With 33's 5.6 won't look too bad.
    This is mine on 285's with spindles, 5100's set at 1.75 & stock springs so 5.75".
    tapatalk_1399176475844-1.jpg tapatalk_1399176467650.jpg
     
    SpruceTaco, Jan 19, 2017
    #9447
    Tinymechanic and White Horse like this.
  8. Jan 19, 2017 at 5:16 PM
    #9448
    Fiend13

    #9448
    Fiend13 Well-Known Member

    Joined:
    Jul 3, 2012
    Member:
    #81853
    Messages:
    4,706
    Gender:
    Male
    First Name:
    Chad
    Waddell/Phoenix area
    Vehicle:
    08 TRD O/R DC Prerunner
    How's the ride? That doesn't look too bad with 33's. The 1.75, is that the 3rd notch?
     
    Fiend13, Jan 19, 2017
    #9448
    ChadsPride likes this.
  9. Jan 19, 2017 at 6:01 PM
    #9449
    SpruceTaco

    #9449
    SpruceTaco トヨタ

    Joined:
    May 18, 2012
    Member:
    #79082
    Messages:
    12,271
    Gender:
    Male
    First Name:
    Mike
    Clearwater, FL
    Vehicle:
    2012 Spruce Mica TRD Sport
    Tinted windows 5%, sill protectors, TRD stubby antenna, weathertech in channel rain guards, wheathertech floor mats, BHLM, Truxedo low pro qt, DTRL deleted, anytime backup camera, bed storage locks, fog lights on anytime, tailgate theft deterrent, painted engine cover, relocated horns, l.e.d bed lights, l.e.d engine bay lights, l.e.d lights above cup holders, in glove box, rear cup holder, in console storage & cubby next to steering wheel, Grillcraft grill, 17x8.5 SCS Ray10's, 35x12.50 Nitto Ridge Grapplers, Borla cat back exhaust, map & dome l.e.d's, TEQ badge on grill, Redline tuning hood struts, Maxtrac spindles, SPC Light Racing UCA's, Bilstein 5100's front set at 0 with OME 885's & extended length Bilstein 5100's in the rear, All Pro expedition leaf springs & 2" blocks, extended brake lines front & rear, 1.5" 4crawler drive shaft spacer, Beefed Taco carrier bearing drop, 1.25" spidertrax wheel spacers on rear, Kenwood DNX570 touchscreen with navigation, 30" led light bar in lower bumper opening, 1/4" top plate spacer drivers side, Bullet Proof Fabricating skid plate, Cali Raised ditch lights & Rago f Fabrication brackets, Amp Research power steps, smoked l.e.d 3rd brake light, Wet Okole seat covers, under cab LED'S tied to dome circuit
    Yeah 3rd notch. Thats an old setup, the ride was ok, just a touch stiff. It got stiffer later on when I went up to 35's & adjusted it to 2.5 with 1/4" Toytec spacers. Now I'm still on 35's but just put the 5100's back to 0 & changed my coils to 885's. The ride is better now.
     
    SpruceTaco, Jan 19, 2017
    #9449
    White Horse and Fiend13[QUOTED] like this.
  10. Jan 19, 2017 at 6:04 PM
    #9450
    ChadsPride

    #9450
    ChadsPride Tacoma Owner & Enthusiast

    Joined:
    Nov 26, 2014
    Member:
    #143119
    Messages:
    127,312
    Vehicle:
    Sponsored by TacomaWorld.com
    I can't wait until my wheels come in and I can finally go up a size in tires.

    They don't look too bad or anything, just a hair small.
     
    ChadsPride, Jan 19, 2017
    #9450
    White Horse, Tinymechanic and TommyG like this.
  11. Jan 19, 2017 at 6:15 PM
    #9451
    SpruceTaco

    #9451
    SpruceTaco トヨタ

    Joined:
    May 18, 2012
    Member:
    #79082
    Messages:
    12,271
    Gender:
    Male
    First Name:
    Mike
    Clearwater, FL
    Vehicle:
    2012 Spruce Mica TRD Sport
    Tinted windows 5%, sill protectors, TRD stubby antenna, weathertech in channel rain guards, wheathertech floor mats, BHLM, Truxedo low pro qt, DTRL deleted, anytime backup camera, bed storage locks, fog lights on anytime, tailgate theft deterrent, painted engine cover, relocated horns, l.e.d bed lights, l.e.d engine bay lights, l.e.d lights above cup holders, in glove box, rear cup holder, in console storage & cubby next to steering wheel, Grillcraft grill, 17x8.5 SCS Ray10's, 35x12.50 Nitto Ridge Grapplers, Borla cat back exhaust, map & dome l.e.d's, TEQ badge on grill, Redline tuning hood struts, Maxtrac spindles, SPC Light Racing UCA's, Bilstein 5100's front set at 0 with OME 885's & extended length Bilstein 5100's in the rear, All Pro expedition leaf springs & 2" blocks, extended brake lines front & rear, 1.5" 4crawler drive shaft spacer, Beefed Taco carrier bearing drop, 1.25" spidertrax wheel spacers on rear, Kenwood DNX570 touchscreen with navigation, 30" led light bar in lower bumper opening, 1/4" top plate spacer drivers side, Bullet Proof Fabricating skid plate, Cali Raised ditch lights & Rago f Fabrication brackets, Amp Research power steps, smoked l.e.d 3rd brake light, Wet Okole seat covers, under cab LED'S tied to dome circuit
    Have you decided on which tire & what size?
     
    SpruceTaco, Jan 19, 2017
    #9451
    ChadsPride[QUOTED] likes this.
  12. Jan 19, 2017 at 6:18 PM
    #9452
    ChadsPride

    #9452
    ChadsPride Tacoma Owner & Enthusiast

    Joined:
    Nov 26, 2014
    Member:
    #143119
    Messages:
    127,312
    Vehicle:
    Sponsored by TacomaWorld.com
    I want the General Grabbers.

    Thinking 285/70/17
     
    ChadsPride, Jan 19, 2017
    #9452
  13. Jan 19, 2017 at 6:23 PM
    #9453
    SpruceTaco

    #9453
    SpruceTaco トヨタ

    Joined:
    May 18, 2012
    Member:
    #79082
    Messages:
    12,271
    Gender:
    Male
    First Name:
    Mike
    Clearwater, FL
    Vehicle:
    2012 Spruce Mica TRD Sport
    Tinted windows 5%, sill protectors, TRD stubby antenna, weathertech in channel rain guards, wheathertech floor mats, BHLM, Truxedo low pro qt, DTRL deleted, anytime backup camera, bed storage locks, fog lights on anytime, tailgate theft deterrent, painted engine cover, relocated horns, l.e.d bed lights, l.e.d engine bay lights, l.e.d lights above cup holders, in glove box, rear cup holder, in console storage & cubby next to steering wheel, Grillcraft grill, 17x8.5 SCS Ray10's, 35x12.50 Nitto Ridge Grapplers, Borla cat back exhaust, map & dome l.e.d's, TEQ badge on grill, Redline tuning hood struts, Maxtrac spindles, SPC Light Racing UCA's, Bilstein 5100's front set at 0 with OME 885's & extended length Bilstein 5100's in the rear, All Pro expedition leaf springs & 2" blocks, extended brake lines front & rear, 1.5" 4crawler drive shaft spacer, Beefed Taco carrier bearing drop, 1.25" spidertrax wheel spacers on rear, Kenwood DNX570 touchscreen with navigation, 30" led light bar in lower bumper opening, 1/4" top plate spacer drivers side, Bullet Proof Fabricating skid plate, Cali Raised ditch lights & Rago f Fabrication brackets, Amp Research power steps, smoked l.e.d 3rd brake light, Wet Okole seat covers, under cab LED'S tied to dome circuit
    Oh that's right, I remember you sayingthat now.
     
    SpruceTaco, Jan 19, 2017
    #9453
    ChadsPride[QUOTED] likes this.
  14. Jan 19, 2017 at 6:25 PM
    #9454
    ChadsPride

    #9454
    ChadsPride Tacoma Owner & Enthusiast

    Joined:
    Nov 26, 2014
    Member:
    #143119
    Messages:
    127,312
    Vehicle:
    Sponsored by TacomaWorld.com
    They are on closeout sale on tire Rack for 178 a pop.

    Debating if I should just order the suckerz
     
    ChadsPride, Jan 19, 2017
    #9454
  15. Jan 19, 2017 at 6:38 PM
    #9455
    SpruceTaco

    #9455
    SpruceTaco トヨタ

    Joined:
    May 18, 2012
    Member:
    #79082
    Messages:
    12,271
    Gender:
    Male
    First Name:
    Mike
    Clearwater, FL
    Vehicle:
    2012 Spruce Mica TRD Sport
    Tinted windows 5%, sill protectors, TRD stubby antenna, weathertech in channel rain guards, wheathertech floor mats, BHLM, Truxedo low pro qt, DTRL deleted, anytime backup camera, bed storage locks, fog lights on anytime, tailgate theft deterrent, painted engine cover, relocated horns, l.e.d bed lights, l.e.d engine bay lights, l.e.d lights above cup holders, in glove box, rear cup holder, in console storage & cubby next to steering wheel, Grillcraft grill, 17x8.5 SCS Ray10's, 35x12.50 Nitto Ridge Grapplers, Borla cat back exhaust, map & dome l.e.d's, TEQ badge on grill, Redline tuning hood struts, Maxtrac spindles, SPC Light Racing UCA's, Bilstein 5100's front set at 0 with OME 885's & extended length Bilstein 5100's in the rear, All Pro expedition leaf springs & 2" blocks, extended brake lines front & rear, 1.5" 4crawler drive shaft spacer, Beefed Taco carrier bearing drop, 1.25" spidertrax wheel spacers on rear, Kenwood DNX570 touchscreen with navigation, 30" led light bar in lower bumper opening, 1/4" top plate spacer drivers side, Bullet Proof Fabricating skid plate, Cali Raised ditch lights & Rago f Fabrication brackets, Amp Research power steps, smoked l.e.d 3rd brake light, Wet Okole seat covers, under cab LED'S tied to dome circuit
    That sounds like a pretty good deal.
     
    SpruceTaco, Jan 19, 2017
    #9455
    ChadsPride[QUOTED] likes this.
  16. Jan 19, 2017 at 6:40 PM
    #9456
    ChadsPride

    #9456
    ChadsPride Tacoma Owner & Enthusiast

    Joined:
    Nov 26, 2014
    Member:
    #143119
    Messages:
    127,312
    Vehicle:
    Sponsored by TacomaWorld.com
    Seriously, I'm considering it hard af right now.

    How bad would it be for them to sit in the man cave for a month or two?
     
    ChadsPride, Jan 19, 2017
    #9456
  17. Jan 19, 2017 at 6:46 PM
    #9457
    SpruceTaco

    #9457
    SpruceTaco トヨタ

    Joined:
    May 18, 2012
    Member:
    #79082
    Messages:
    12,271
    Gender:
    Male
    First Name:
    Mike
    Clearwater, FL
    Vehicle:
    2012 Spruce Mica TRD Sport
    Tinted windows 5%, sill protectors, TRD stubby antenna, weathertech in channel rain guards, wheathertech floor mats, BHLM, Truxedo low pro qt, DTRL deleted, anytime backup camera, bed storage locks, fog lights on anytime, tailgate theft deterrent, painted engine cover, relocated horns, l.e.d bed lights, l.e.d engine bay lights, l.e.d lights above cup holders, in glove box, rear cup holder, in console storage & cubby next to steering wheel, Grillcraft grill, 17x8.5 SCS Ray10's, 35x12.50 Nitto Ridge Grapplers, Borla cat back exhaust, map & dome l.e.d's, TEQ badge on grill, Redline tuning hood struts, Maxtrac spindles, SPC Light Racing UCA's, Bilstein 5100's front set at 0 with OME 885's & extended length Bilstein 5100's in the rear, All Pro expedition leaf springs & 2" blocks, extended brake lines front & rear, 1.5" 4crawler drive shaft spacer, Beefed Taco carrier bearing drop, 1.25" spidertrax wheel spacers on rear, Kenwood DNX570 touchscreen with navigation, 30" led light bar in lower bumper opening, 1/4" top plate spacer drivers side, Bullet Proof Fabricating skid plate, Cali Raised ditch lights & Rago f Fabrication brackets, Amp Research power steps, smoked l.e.d 3rd brake light, Wet Okole seat covers, under cab LED'S tied to dome circuit
    No worse than sitting in a warehouse.

    You can get the p rated Toyo AT II's on Tread depot for the same price & they're a 60k mile tire & aren't a 10 ply tire so the ride would still be pretty decent.
     
    SpruceTaco, Jan 19, 2017
    #9457
    White Horse and TommyG like this.
  18. Jan 19, 2017 at 7:09 PM
    #9458
    ChadsPride

    #9458
    ChadsPride Tacoma Owner & Enthusiast

    Joined:
    Nov 26, 2014
    Member:
    #143119
    Messages:
    127,312
    Vehicle:
    Sponsored by TacomaWorld.com
    I might have to look into those.

    Should I go 285/70 or 287/75
     
    ChadsPride, Jan 19, 2017
    #9458
    TommyG likes this.
  19. Jan 19, 2017 at 7:15 PM
    #9459
    TommyG

    #9459
    TommyG Around

    Joined:
    Jul 25, 2010
    Member:
    #40725
    Messages:
    2,283
    Gender:
    Male
    First Name:
    Grouch
    MELTING POT
    Vehicle:
    21 MAX
    No mods
    FIFY. Lol
     
    TommyG, Jan 19, 2017
    #9459
    ChadsPride[QUOTED] likes this.
  20. Jan 19, 2017 at 7:17 PM
    #9460
    TommyG

    #9460
    TommyG Around

    Joined:
    Jul 25, 2010
    Member:
    #40725
    Messages:
    2,283
    Gender:
    Male
    First Name:
    Grouch
    MELTING POT
    Vehicle:
    21 MAX
    No mods
    That's what I run. Rotate and they will do 60. And quiet.
     
    TommyG, Jan 19, 2017
    #9460
    ChadsPride and SpruceTaco[QUOTED] like this.
Page 473 of 688

Products Discussed in

Air Intake Snorkel Kit Fit For 2005-2015 Toyota Tacoma With 4L Right Petrol intake air snorkel kit high performance system compatible kit Replacement black Rotational Molding (2005-2015)
$89.99
Maxtrac Suspension (716920) 2" Rear Lift Shackle for Toyota Tacoma
$93.27
Hooke Road Tacoma Double Cab Top Roof Rack Aluminum Crsssbars for 2005-2023 Toyota Tacoma 2nd 3rd Gen Truck, Cargo Carrier Basket (Double Cab Only)
$349.99
Spicer 5-1330-1X U-Joint Kit
$34.95
MaxTrac K886842 Suspension Lift Kit w/Shocks 4 in. Lift Incl. Front Spindles With Brake Lines/Rear Blocks/U-Bolts/Rear MaxTrac Shocks Suspension Lift Kit w/Shocks
$909.67
Spidertrax WHS007 Blue Wheel Spacer Kit
$147.50
FUEL OFF-ROAD D564 BEAST 17X9, 6X5.5, 4.53, -12mm MATTE BLACK DOUBLE DARK TINT - D56417908345
$381.00
Old Man Emu D29XL Leaf Spring
$81.89
QSA 4" Lift Spindles (2WD ONLY) + Extended Brake Lines. Compatible with: 2005-2022 Toyota Tacoma (6 Lug/Prerunner)
$445.13
Bilstein 24-186728 5100 Series Rear Shock fits 2005 2023 Tacoma 4WD with 0-1" Lift - Monotube Design, Fade Free Performance, Optimal Performance
$103.95
To Top