FN FX Pro wheels

Matte gunmetal gray.

 

DONE !! Details coming soon! Trying out the Gray TRD Stickers inside the center caps,
feeling em out , I also bought the red and also the oem, on the fence -

ps - Dustin @ FN Wheels is the FVKING TRUTH

 

Looks great!!! Like the grey TRD

 

you get the stickers from importequipment?

 

Yes Nathan @ Import equipment ,
Little tough putting them on perfectly but with enough soapy water you get plenty of tries - don't pull em on and off just wet then enough to keep sliding them around and once set just walk away and start working on the nest one , it'll eventually dry in place and then grand finale use a blow dryer high heat full blownfrom a distance

Pro tip - at minimum make sure the TRD lettering in the middle gets centered and laid down properly , the ring is easier when applied separately

 

Just gorgeous! I have the OR version I would love that wheel/tires combo. Any suggestions on where to buy the Ko2s?

 

THANK YOU!!!
I went with Americas Tire Co / Discount Tires - I did a ton of homework and bang for buck , lifetime balance (you'll need from what I gathered due to the heavy tread, balancing is crucial as they wear ) , rotations, flat repair anddd removing TPMS from stocks to new wheels they beat everyone, they actually didn't even charge me for TPMS because the sensors are so small they can pop em off the side without removing stock tires - it wasn't by a long shot in savings but the convenience of a franchise store is clutch if you're on the road a lot like I am. If I bought from tire rack and had then mounted it would be the same cost just no perks that come within a franchise like I mentioned above .

 

Looks awesome man!!! Matte Black?

 

THANK YOU!!
Yes they're matte however more of a satin finish there is some sheen but not shiny at all they just have a clean mild sheen

 

I noticed your tires have tire dressing on them, any issues with getting it on the matte finish

 

Im pretty particular and I use the Aerosal Foam Spray can
I use my front license plate filler, the paper one and bend it
around the wheel as I spray so that I don't. Its not perfect but its
seriously no big deal to wipe right off when you're done. I usually
wipe the lip and excess off. I thought of using a paint brush such as I
do on my other cars with lower profile and road style tires with a tire gel
t-shine but because of the nobby tires I felt and am sure it'll
goop up in between the rubber and then sling all down the sides

ps - I went with raised white letters out and using a spray makes sure
my white letters don't get dirty or smeared with rubber residue

 

Really like the grey trd stickers

 

Looks freaking awesome!

 

Thank you! They grew on me a lot! I'm keeping em on, I have a pack of 5 in gloss red and a set of 4 OEM aluminum caps sitting on my desk going in Craigslist

 

These look nice. Thinking of getting a set for my new ride.

 

I just got my matte black fn FX pros in yesterday, still undecided about the center cap. I have the fnw ones Dustin sent me, torn between those, grey trd like yours or just black.

 

Go hard or go home!!! Do it

 

Do it they are so worth it Dustin is the man

 

When did you place your order? ive been waiting 2 months for a set of matte blacks

 

Early November when I Ordered the truck