What Have You Done To Your 2nd Gen Tacoma Today?

This is the key I used. Make sure the key you order has a letter or symbol engraved in it that matches your working key.
2010 Toyota "G" Chip Master Transponder Key (Factory Original - NEW)

$35 2010 Toyota "G" Chip Master Transponder Key (Factory Original - NEW)

https://www.amazon.com/dp/B0089KNIZ2/ref=cm_sw_r_cp_api_JDUGyb7GTR0G8

To pair the key, you need an ODB II cable and the techstream software installed on a windows computer that you can get to your truck. This cable comes with the software.

KKmoon OBDII B a OBD1 Replace ECU Jumper Conversión Adaptador de cableado para Honda Acura https://www.amazon.com/dp/B00W97K7O6/ref=cm_sw_r_cp_api_GHUGybFZ2EKEY

Once you get the software setup and connected, go to the immobilizer utility and add a new key. I'll have to take better notes next time I fire the computer up.

I saw a YouTube video that appeared to pair a new key without the software, but I didn't try that method. It involved opening and closing the door six times and then inserting and removing the key six times. It might work, because that is similar to the method I used to program the key fob.

 

$242 Toyota Tacoma Bed Security Lockbox

https://smile.amazon.com/Toyota-Tac...=1484977156&sr=8-6&keywords=tuffy+storage+box

 

I think it's something like 10ga steel.

 

I might have had something like that, but it also had a grim reaper airbrushed on the back...

 

I was just thinking of how I can do the same but with a pro grille. No drilling would be ideal but that's going to be hard.

 

I like the two tone orange and red like the one you posted but on the order page it only seems to offer red, white or blue. Did you find one like the picture?

 

#6 Low mount plate bracket....

 

When I did mine I messed up the wheel speed sensor wire.I didn't disconnect it and I think it stretched a little.

 

Got my new wheels/tires yesterday. Gonna wait a few more weeks before putting them on with all the salt and sand on the roads.

 

Awesome, thank you!

 

I am looking for a thread on how to replace the lights on the steering wheel controls but I am having no luck, does any one know where to look and also what the part number is for the bulb?

 

Once I get rid of my Samsung G7 and go back to iPhone I will be getting one of these! Damn this site and showing me all the things I REALLY need!

 

I bought one of these about 3-4 months ago. Absolutely love it!
Hard to beat for $25

 

Yea, I think that may be what happened. All the connections are there, disconnected the battery and the light is still on. I'm about to take it to get the alignment, I'll have him run the scanner on it for me. Thanks!

 

Took out the secondary air filter on my 2TR this morning. Takes 10 minutes and I'm impressed. Throttle response is noticeable faster, it's harder to stall the engine (manual trans) so reversing is much easier and takeoffs feel faster and smoother. 10/10.

 

This happens with some trucks when you lift them. Something gets thrown off, so the VSC needs to be recalibrated by the dealer. check out this thread

https://www.tacomaworld.com/threads/lift-with-vsc-answer.41215/

 

What you talking bout Willis?
Details plz... I wanna do this

 

I hate'd mine! I replaced it with the rubber inserts and love them. The old style didn't hold a 20oz soda bottle very well, it flopped all around and a can would rattle. Newer rubber inserts FTW

 

Agree agree....need to add this to my list!

Edit: never mind, my excitement got the best of me and I posted before going through the rest of the posts!