Maxtrac Spindle Lift for 2nd Gen Prerunners

Can you pm me a quote on the hardware pack and brake lines? Thanks!

 

Wow thats a deal. I'd leave that transaction like:

 

Sure can!

 

@Alfuh what is the bs on your 16's? Are you running spacers? I have 16's with a 4.5bs, just wondering if I should get at least 1/2" spacers to be on the safe side

 

@Fiend13

The spindles are beefy af right!!!!!

When the delivery guy showed up with mine and handed them off, I was like....DAMN!!!!

Haha

 

4.5" on a 16x8, yeah I have 2" spacers all around but I got those for stance reasons and now with my fenders the fill them out. You should be fine with no spacers, but id honestly say get some 1.25" spacers if you want some gnarly stance

 

And I finally caved, put the spacers on the rear to even out with the front width.

 

I did that when I installed my kit.

Looks really good IMO

Have not had one single issue with the spacers

 

I didn't think it would bother me, but after a while it started to. So I finally got those put on and finished it all off.

 

Pics dude pics!

 

Will grab some tomorrow. Wee bit dark out at the moment. Glad the lift is all done. Now I can at least attempt to not have money going to parts.... That's what I say now, but I'm gonna try to hold to that.

 

Haha!!! Yeah, it's a battle between 'being satisfied' and 'really going all out'

For now, I'm leaving my suspension alone.

Maxtracs gave me 4" and TRD OR shocks and coils gave me another inch.

Sitting at 5" up front and 3" out back (full Dakar packs) is good for now.

Truck sits dead level front to back. I'm happy as could be!!

In a couple years when it's all worn out I will get some Kings or maybe even an ADS setup.

 

I figured since this is the DD and won't get too crazy with offroading, this will serve me well till I need a new vehicle. Or maybe I will have to upgrade the suspension by then due to mileage

 

That's the spirit!​

 

Planning on running this till the wheels fall off... Hopefully not literally. I think in my group of friends since high school, have owned the least amount of cars since I have been driving.

 

Nice!!! I actually need to replace my wheels bearings front drivers and passengers.

There's no play, but defiantly making noise. Sucks, because I've never even taken this thing off the street

I had a buddy who had to do his ok the exact same yeah and model truck as I've got.

Must have been a bad day at the assembly line.

Anyway, I plan to drive this thing as long as physically possible also!!

 

I'm thinking that would be the next thing that will possibly have to happen. Knock on wood, no growling but I'm thinking that would be one of the next items that may need to get worked on regarding maintenance.

 

Yeah, mine aren't in going to cause any issues right now or anything.

Just thinking ahead really.

Post some pics of your rig dude!

 

Some quick shots this mornin. Nothing too crazy compared to others on this forum. But she's mine

 

Oh she's a beauty!! I remember seeing her now.

Devil horn gang yo!!!

​