15th Annual SoCal / TW Superstition Trip Jan 24 to Jan 26 2025

then you weren't driving fast enough!

 

My biggest issue figuring out a way to repair/replace the snapped abs line and speedometer line.

 

We should be able to get the whole line for the wheelspeed sensor.

 

FYI, i tore the ABS cable on the F/R this weekend. Found it at Toyota of El Cajon for 56.07. Here's the link (mine's a 2005)
http://parts.toyotaofelcajon.com/p/...Harness--Front-Right/49150421/8951604090.html

 

Oh, nice! Thanks, fellas.

 

https://www.youtube.com/embed/a5Z_co-qE9U Sand Dam at 4cyl speed

 

I have a spare abs line and brake lines at the shop. I also have about a dozen spare spindles at the shop. You can barrow a non gusseted set if you'd like. I have a new gusset design out at the water Jet shop right now, but they won't be available for atleast a few weeks till I get the prices back and test fit everything.


I may also have a set of powdercoated spindles that I did not build (that's why I haven't sold them) that may work out for you. If you need anything just hit me up and we'll what we can make work.

 

I appreciate that, bud. I have a buddy that might be able to gift me a drivers side spindle if we can figure a way to get it to me. @bigbarlo I'm hoping can make the delivery since he'll be out here sometime this week for work. I might take you up on that abs line. It'll fit a 2015 4x4 trd, yes? And its the hard brake lines I'm gonna need. Well, actually both brake lines- hard lines and braided or non braided. Goal is to just get rolling again and then dial back in with reinforcements after

 

You need the hard line on the caliper side or the frame side?

 

pic dump:

 

Caliper side. It snapped right at the steel braided line. That steel braided line held strong like bull. Haha. But its compromised after pinching it off with vise grips to try salvage some sort of brake fluid.

 

I know I have those lines as well. I can check condition tomorrow when I get back into town

 

Well @goblue82 from the sounds of it I have every suspension part but the few you need. I do have stock soft brake lines I can give you if needed. Also have a helping hand if needed brotha let me know I'm always down to turn a wrench

 

Thanks so much, brotha. That's will all help tremendously.

 

I know I have them, just want to get them off the calipers to make sure I don't damage them on removal. I'm planning on driving straight thri from Texas today and have tomorrow off so should make it to the shop tomorrow morning

 

Thanks my brother. Ill let you know. For now I'm just sourcing parts. Install details are still in the works. I dont have a trailer and my tow mileage is used up. I really need to get AAA. That's my bad. I don't have a lot of time to wrench myself this week or next so after sourcing parts I may have no options than have a local offroad (thankfully we have a few of them in town) tow my rig to their shop and do the labor.

 

Thanks again! Safe travels. Whenever you get in town and settled we'll go from there. I owe you big time.

 

No problem man sorry I can't hook you up with parts but I'm down to hook you up with a helping hand if you need it. Tow the rig or whatever you need I'll help out where I can glad to see everybody was ok man that's the most important

 

@goblue82 ur so beast mode dude your so awesome to offroad with I'm sure lady Lucile is gonna be rebuilt bigger better stronger in no time


https://youtu.be/DDW9xTpzwuY

You and this guy know how to mob hard.