*Closed* 20% Off Supercharger Group Buy 2nd Gen 4.0 Engine

Sold to @gersus

 

Already tried. It is sold. I just PM'd @moodywizard

 

MAF cal or AFR cal?

 

Damnit. I feel like a idiot. I mixed the two up. MAF CAL AND AFR CAL.
I HAVE THE MAF CAL. IM SO SORRY.
DIDNT REALIZE THERE WERE TWO.

 

MAF Cal

 

Damn. Nevermind. They are different things, correct?

 

I feel like a dumbass. Sorry guys

 

I believe so right? Anyone!

 

Easy to confuse. I had to check urd website just to make sure I wasnt mistaken.

 

I need the afr cal,. Not the maf. I need what @loginfailed installed to make his afr correct.

 

No? Buy my shit

 

Maybe if i splice into where the afr goes itll do the same thing

 

@loginfailed what obd hardware and software are you running? Is that on iOS? Now I'm wondering if the thing i borrowed from my coworker was reading open/closed loop accurately.

 

That is an Autel Maxisys Mini MS905

$649 Autel MaxiCOM MK808S-TS Bidirectional Scanner: 2025 All-in-one TPMS Tool of MaxiCheck MX808S-TS, MK808 BT Pro, TS608 with TPMS Programming Relearn, 28 Service, Active Test, Android 11, FCA Autoauth

https://www.amazon.com/Autel-Maxisys-Automotive-Diagnostic-Analysis/dp/B00LPIRY6E

They are a lot cheaper now. I bought mine when they first came out. They were $1,800 back then, and that was a hook up price.

 

Fuck that's expensive haha I'm waiting to hear back from Magnuson guy and going to call gadget tomorrow about the ucon. What another 1500 at this point right?

 

Gadget said: "Early next month." When I asked a week ago when UCON is available again (2007 FJ Cruiser)?

 

He told me last week he had a few that he could ship out for the 07 fj cruiser.

 

It adds up. Won't be long before you've spent more on supporting mods than you've spent on the mod itself.

 

FIFY

 

I mounted the AFR sensor calibrator under the driver dash area for easier access. The bolt hole on the end opposite the wiring, I secured to the blower motor with the blower motor screw. The screw now goes through the box first then the blower and then into the blower case. The other end is secured with a zip tie to the big wire harness.

Probably not a URD approved mod, but I made it a little easier to access the serial port. I made a hole in the lid so my serial cable can go straight in without having to take the lid off. I'm planning on doing some small adjustments over time to get the AFR exactly how I want it.