1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Cap City Build & BS AF

Discussion in '2nd Gen. Builds (2005-2015)' started by ChadsPride, Apr 16, 2016.

  1. Feb 1, 2017 at 1:27 PM
    yota243

    yota243 Well-Known Member

    Joined:
    Aug 22, 2012
    Member:
    #85267
    Messages:
    21,639
    Gender:
    Male
    First Name:
    E.J.
    north Alabama
    Vehicle:
    turbo 05 prerunner trd off road DC
    Bw s256 turbo with 3 in glass pack dumped pre axle raptor liner bed and top rails and fenderflares and rocker panels. Hunter side steps. Plasti-dipped upper fenders and emblems. satin black spray paint here and there inside and out. 5100's set to 1.75" up front . C channel front bumper. Maxxis bighorn 255/85/16
    bumpers and sliders







    and tube
     
  2. Feb 1, 2017 at 1:27 PM
    BYJOSHCOOK

    BYJOSHCOOK Mr. Mojo Risin

    Joined:
    Jun 9, 2013
    Member:
    #105887
    Messages:
    27,925
    Gender:
    Male
    First Name:
    Josh
    Woodstock and Alpharetta Ga
    Vehicle:
    2000 SR5 4WD Lunar Mist
    Check Out My Builds
    IDK they haven't created anything for them yet. I'm waiting for a rear swingout and if they do a GB I'm in like Fin on it
     
  3. Feb 1, 2017 at 1:29 PM
    YotaOverAll

    YotaOverAll Backyard Performance

    Joined:
    Jul 9, 2012
    Member:
    #82254
    Messages:
    14,700
    Gender:
    Male
    First Name:
    Jessie
    Panama City, FL
    Vehicle:
    02 Prerunner SR5
    3" Toytec spacers, Bilstein 5100s in the back with add a leaf and overloads removed.
  4. Feb 1, 2017 at 1:29 PM
    Roll Tide

    Roll Tide COO COO KACHOO

    Joined:
    Mar 6, 2012
    Member:
    #74340
    Messages:
    15,093
    Gender:
    Male
    First Name:
    Q
    Here and there. Sometimes.
    Vehicle:
    01 T4R
    Head unit. That's it.
    when I see tube bumpers...


    [​IMG]
     
  5. Feb 1, 2017 at 1:33 PM
    greeneggsnspam

    greeneggsnspam ಠ_ಠ

    Joined:
    Oct 30, 2013
    Member:
    #115524
    Messages:
    42,619
    Gender:
    Male
    Houston, TX
    Vehicle:
    .gif
    Too poor to list anything interesting.
    I got in on their group buy for Black Friday for a HC with rear swing out . :spy:
     
    ChadsPride[OP] likes this.
  6. Feb 1, 2017 at 1:33 PM
    yota243

    yota243 Well-Known Member

    Joined:
    Aug 22, 2012
    Member:
    #85267
    Messages:
    21,639
    Gender:
    Male
    First Name:
    E.J.
    north Alabama
    Vehicle:
    turbo 05 prerunner trd off road DC
    Bw s256 turbo with 3 in glass pack dumped pre axle raptor liner bed and top rails and fenderflares and rocker panels. Hunter side steps. Plasti-dipped upper fenders and emblems. satin black spray paint here and there inside and out. 5100's set to 1.75" up front . C channel front bumper. Maxxis bighorn 255/85/16
    you could always use the tube as the skeleton and or have a hybrid...
     
    dirty deeds and ChadsPride[OP] like this.
  7. Feb 1, 2017 at 1:34 PM
    Roll Tide

    Roll Tide COO COO KACHOO

    Joined:
    Mar 6, 2012
    Member:
    #74340
    Messages:
    15,093
    Gender:
    Male
    First Name:
    Q
    Here and there. Sometimes.
    Vehicle:
    01 T4R
    Head unit. That's it.

    I think i'll start with cardboard. lol.
     
    ChadsPride[OP] and Tractorman like this.
  8. Feb 1, 2017 at 1:34 PM
    greeneggsnspam

    greeneggsnspam ಠ_ಠ

    Joined:
    Oct 30, 2013
    Member:
    #115524
    Messages:
    42,619
    Gender:
    Male
    Houston, TX
    Vehicle:
    .gif
    Too poor to list anything interesting.
    Go big or go home :D
     
  9. Feb 1, 2017 at 1:36 PM
    Roll Tide

    Roll Tide COO COO KACHOO

    Joined:
    Mar 6, 2012
    Member:
    #74340
    Messages:
    15,093
    Gender:
    Male
    First Name:
    Q
    Here and there. Sometimes.
    Vehicle:
    01 T4R
    Head unit. That's it.
    I'm going to attempt some different things here. We'll see. May not be possible.
     
    ChadsPride[OP] likes this.
  10. Feb 1, 2017 at 1:36 PM
    yota243

    yota243 Well-Known Member

    Joined:
    Aug 22, 2012
    Member:
    #85267
    Messages:
    21,639
    Gender:
    Male
    First Name:
    E.J.
    north Alabama
    Vehicle:
    turbo 05 prerunner trd off road DC
    Bw s256 turbo with 3 in glass pack dumped pre axle raptor liner bed and top rails and fenderflares and rocker panels. Hunter side steps. Plasti-dipped upper fenders and emblems. satin black spray paint here and there inside and out. 5100's set to 1.75" up front . C channel front bumper. Maxxis bighorn 255/85/16
    haha I meant make a tube bumper and then weld plate to the tube... its a lot easier than getting all you angles right with the plate, since you can flat weld basically everything (the easiest of welds) and not have to worry about asymmetry from well basically everything going wrong if you aren't using a jig or something
     
    dirty deeds and ChadsPride[OP] like this.
  11. Feb 1, 2017 at 1:42 PM
    Roll Tide

    Roll Tide COO COO KACHOO

    Joined:
    Mar 6, 2012
    Member:
    #74340
    Messages:
    15,093
    Gender:
    Male
    First Name:
    Q
    Here and there. Sometimes.
    Vehicle:
    01 T4R
    Head unit. That's it.

    That would work, from the standpoint of the mounting area. I could see using that method, however, I'm wanting to do potentially a drastically different design...
     
    dirty deeds and ChadsPride[OP] like this.
  12. Feb 1, 2017 at 1:43 PM
    yota243

    yota243 Well-Known Member

    Joined:
    Aug 22, 2012
    Member:
    #85267
    Messages:
    21,639
    Gender:
    Male
    First Name:
    E.J.
    north Alabama
    Vehicle:
    turbo 05 prerunner trd off road DC
    Bw s256 turbo with 3 in glass pack dumped pre axle raptor liner bed and top rails and fenderflares and rocker panels. Hunter side steps. Plasti-dipped upper fenders and emblems. satin black spray paint here and there inside and out. 5100's set to 1.75" up front . C channel front bumper. Maxxis bighorn 255/85/16
    u gonna put a big "a" on it or an elephant?
     
    dirty deeds and ChadsPride[OP] like this.
  13. Feb 1, 2017 at 1:43 PM
    Roll Tide

    Roll Tide COO COO KACHOO

    Joined:
    Mar 6, 2012
    Member:
    #74340
    Messages:
    15,093
    Gender:
    Male
    First Name:
    Q
    Here and there. Sometimes.
    Vehicle:
    01 T4R
    Head unit. That's it.

    No..lol. haha.

    No branding...
     
  14. Feb 1, 2017 at 1:45 PM
    BYJOSHCOOK

    BYJOSHCOOK Mr. Mojo Risin

    Joined:
    Jun 9, 2013
    Member:
    #105887
    Messages:
    27,925
    Gender:
    Male
    First Name:
    Josh
    Woodstock and Alpharetta Ga
    Vehicle:
    2000 SR5 4WD Lunar Mist
    Check Out My Builds
    Well you're a 2nd gen, but usually with first time things vendors do GB's to get it out there so I hope they do that :fingerscrossed:
     
  15. Feb 1, 2017 at 1:51 PM
    yota243

    yota243 Well-Known Member

    Joined:
    Aug 22, 2012
    Member:
    #85267
    Messages:
    21,639
    Gender:
    Male
    First Name:
    E.J.
    north Alabama
    Vehicle:
    turbo 05 prerunner trd off road DC
    Bw s256 turbo with 3 in glass pack dumped pre axle raptor liner bed and top rails and fenderflares and rocker panels. Hunter side steps. Plasti-dipped upper fenders and emblems. satin black spray paint here and there inside and out. 5100's set to 1.75" up front . C channel front bumper. Maxxis bighorn 255/85/16
    have you considered c channel? u can notch the legs out then just bend em together and weld the seems to save some time and also I feel like its stronger since its all 1 piece of metal
    [​IMG][​IMG]
     
    dirty deeds and ChadsPride[OP] like this.
  16. Feb 1, 2017 at 1:56 PM
    Roll Tide

    Roll Tide COO COO KACHOO

    Joined:
    Mar 6, 2012
    Member:
    #74340
    Messages:
    15,093
    Gender:
    Male
    First Name:
    Q
    Here and there. Sometimes.
    Vehicle:
    01 T4R
    Head unit. That's it.

    I'll probably start with cardboard to get an idea of the shapes, then move up to more sturdy media. Thanks for that suggestion!
     
  17. Feb 1, 2017 at 2:02 PM
    medic2230

    medic2230 @Koditten Pirate Radio member #002

    Joined:
    Oct 13, 2008
    Member:
    #9942
    Messages:
    63,971
    Gender:
    Male
    First Name:
    Murph
    Bama! Roll Tide
    Vehicle:
    2011 Taco 4x4 DCLB 2019 TRD PRO 4runner 2018 RAM 2500 mega cab
    20% Tint, OME 3"complete lift with Dakar's, Light Racing UCA's, 285/75/16 Nitto Terra Grapplers, 10 HP TW sticker, Ultraguage, B.A.M.F. Rock Sliders, MedicFab Bed Rack, Relentless front bumper, Air Flow Snorkel, Ham comms, Tech Deck

    Welding with jumper cables.
     
  18. Feb 1, 2017 at 2:10 PM
    ChadsPride

    ChadsPride [OP] Tacoma Owner & Enthusiast

    Joined:
    Nov 26, 2014
    Member:
    #143119
    Messages:
    127,312
    Vehicle:
    Sponsored by TacomaWorld.com
    Bump for custom shit
     
    dirty deeds and medic2230 like this.
  19. Feb 1, 2017 at 2:21 PM
    23Skidoo

    23Skidoo A thirsty fish

    Joined:
    Jan 16, 2015
    Member:
    #146474
    Messages:
    56,169
    First Name:
    Paul
    https://youtu.be/xvFZjo5PgG0
    Vehicle:
    meme
    Time to escape work.
    [​IMG]
     
  20. Feb 1, 2017 at 2:24 PM
    YotaOverAll

    YotaOverAll Backyard Performance

    Joined:
    Jul 9, 2012
    Member:
    #82254
    Messages:
    14,700
    Gender:
    Male
    First Name:
    Jessie
    Panama City, FL
    Vehicle:
    02 Prerunner SR5
    3" Toytec spacers, Bilstein 5100s in the back with add a leaf and overloads removed.
    :wave:
     

Products Discussed in

To Top