Tacos in St. Louis area

You are going to scratch it off and retouching powdercoat is a ball ache. Hit then with a couple coats of self etching primer and some semi-gloss out of a rattle can. Easy to touch up and looks fine. The sliders on my Tacoma were done that way and I've touched them up myself with ease.

 

I did the same with my sliders

 

For sliders I'd keep to painting them yourself anyways, they take a bunch of abuse from your tires. Either way you'll be touching them up

 

I thought the same way since they will get beat up after awhile. Retouch here and there . GREAT IDEAS!!! Yall are AWESOME !!!!

 

I think I did ok. Will try see if I install next couple days .

 

wait...I'm supposed to repaint my armor?

 

Lol

 

Over at the Hilton Frontenac for a tree conference....no time for cruising around to spot anyone, but hey

 

Right by my Pops house Kirkwood

 

Part of my growing up was in Chesterfield, sadly don't have time to go by the old house. 6 hrs back to Little Rock tomorrow.

 

Have to make some room, still have my stock wheels for a spare set so these need to find a new home

Before they go to the classifieds ill see if anyone has interest thats local. 4 SCS F5 3.5bs wheels with 315/75/16 Hankook RT03 tires, tread life is between 40-60% (ill get a gauge to properly measure them) all wheels have rock rash around the lip (see pictures)

edit: If needed, will help do the work needed to make these fit

 

So my carrier bearing went out today and caused all kinds of noise and damage to the sleeve anyone have any idea of a good shop that might work drive shafts ?

 

What wheels are you going with??

 

Already have another set, F5 gunmetal just in a 17 instead of the 16

 

Gotcha....big fan of the F5's??

 

Yup, love the F5. Ill change up the wheel when I need something in a 8 lug

 

We need @SCSPerformance to start making 8 lug wheels

 

Hopefully

 

Can that even be fixed? Well, anything can be fixed, but should it? I would be looking at Pick N Pull, you've got a wide range of year models that should work.