What Have You Done To Your 2nd Gen Tacoma Today?

Thinking outside the box! good job !

 

I've never seen any blacked out taillights that weren't led. Why don't you want the led ones?

Edit: nvm I do remember seeing these once. But they are kinda fonky

 

​

 

Thanks for your service!!

 

Ok, the design is morphing again. Photos later.

With the small walk in door, it is too intrusive to have the sleeper all the way to the door. So the hinged section did not work well enough for us. YMMV.

So, I pulled the 'rear plywood section with the hinge' out, pulled the rear 2x8 out, put (2) 2x4s in it's place, bolted one to the frame, like the 2x8 was, screwed the other 2x4 to the newly cut rear sleeper section that goes all the way across.
The 2 side sections are long, but not all the way back to the rear.
That rear section can now be lifted out, slid forward, and allows stepping in much easier. But, it won't slide backwards into the fiberglass door.

Still have to get lifout handles before i carpet the sections with the recycled poly carpet I got at Home Depot.

 

Want to elaborate on that door panel rattle? I have a nasty one coming from the driver rear I cant find. Between 1700-2100RPM sounds like a bolt vibrating in a can.

 

On Friday I had my SCS Ray10's installed. Went through a wash on Saturday and then Sunday he wanted to say hello to his brother from another mother so I took a picture of them together. In this picture I have the Ray 10's, pair of old 10 Holes, and Draglites. I must have a thing for wheels with holes?

 

Thank you very much Ken, both for thanking me and for your service!

 

Replaced #6 rod bearing.

 

where did you get those fog lights grill guards and how do you like the front hitch ? always wanted one .

 

Mine is very light, I think it was the door lock & window switch wiring bundles hitting the door panel. I duct taped everything to the weather liner, not sure that did it though, it may be behind the weather liner where the speaker wire & window motor is. Will know more after a few commutes this week.

 

replaced the needle bearing.....and good timing too mine was pretty chewed up.

 

Ordered a $25 dash cam... we'll see if it's a POS or not I guess. Phoenix drivers be morons.

 

Morons are here, too. Although, they seem to travel here from somewhere else most of the time.

 

It use to be just the snow birds from Florida, now they are from everywhere.

 

Not a big fan of LED. Idk why. I'll probably gonna go w/ these

 

Hmmmm... interesting.

Can you throw up the actual link? Curious on cost and maybe a couple other photos.

 

I have them saved in my eBay app. But here is the listing so you can find them. Just want them to match w/ my headlights a lil bit better

 

We deal with you northerners down here alot to. Just last week a massetchusets driver going 20 below the limit on the freeway. Enraging lol

 

Finished deadening the door i started on last night. It shuts with a much more satisfying thud. Lol.gunna yank the sub enclosure out and get the backwall and floor boards today if i feel motivated enough. Door panels are a pain in the ass.