Oahu Members Thread

I think i need to check my lr spc uca bushings to cuz my driver side is starting to squeak.

 

Total Chaos directions are different. Outside of the bushing should be clean and should not rotate in the uca. Only supposed to have grease on the inside of the bushing and metal sleeve. I had better results following their instructions on mine and my wife's UCAs. I've only greased the UCAs on the runner once since installing them, and they never really squeak.

 

Yes, I wish mine were like that. That's how I originally greased mine.

 

Miles showed me these so you can grease the shackles:

http://diy4x.com/product.php?productid=17724&cat=0&bestseller=Y

 

Hey there!

I can definitely set you up with those lines. Shoot me a Pm if you're interested.

Jp

 

Anyone else with their power out during the super bowl? Really windy in Kaneohe.

 

It's all good in Kailua.

 

Ewa always has power

 

does it have play? My upper bushings had some play and ruined my tires.

 

Mine went out before the second half.

 

These heco guys....

Your house has had plenty of outages recently, had one last week where some lines came down further up.

 

So does the truck! AM radio.. Was too lazy to bust out the generator.

 

Shit! Just lost power again! Cannot go sleep now! Too dark!

 

I think HECO needs to hire better machinists

 

Not sure haven't disconnected the ball joint from the spindle yet. Might to that sometime this week.

 

was wondering the same thing...

 

All you guys with King Coilovers is there a way to adjust them on the truck? Or are you pulling them off the truck, into a vise and adjusting? PITA to keep having to take it off.

 

Can't you adjust Kings with a punch without taking the wheel off if you can wiggle your arm back there?

 

Yeah i could adjust it but the reservoir coupling is in the way of the next adjustment hole on the collar. This is on the passenger side. Never tried the driver side since i couldnt adjust it.