1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

CAN A WORN UJOINT 148K CAUSE VIBRATION FROM 35--70 MPH

Discussion in '2nd Gen. Tacomas (2005-2015)' started by tacotruck 2.7, Feb 9, 2017.

  1. Feb 9, 2017 at 9:17 PM
    #1
    tacotruck 2.7

    tacotruck 2.7 [OP] Well-Known Member

    Joined:
    Dec 9, 2012
    Member:
    #92775
    Messages:
    334
    Gender:
    Male
    Katy TX
    Vehicle:
    09 cab and a half 2.7
    09 base Taco 148k auto 2wd----Im getting a high frequency vibration at road speeds then when i let off the gas to a stop the truck acts normal. I was taking a look down below and noticed about a 1/4" of play between the tranny and shaft ujoint. U can hardly tell on the pictures (top of center) one shows some shiny steel then turned the other way it dosent. Weird thing is the tranny ujoint has the most play vs the other two seem fine. Have any of you 120k plus guys Experienced any of this ? Also what is typical lifespan of these Ujoints ...IMG_20170209_225256.jpg IMG_20170209_225245.jpg
     
    Last edited: Feb 9, 2017
  2. Feb 9, 2017 at 9:28 PM
    #2
    10MGM

    10MGM Well-Known Member

    Joined:
    Dec 13, 2009
    Member:
    #27475
    Messages:
    161
    Gender:
    Male
    Vehicle:
    2010 AC MGM 4x4
    That rust is what is left of the needle bearing. Change them all. Upgrade to a serviceable u joint.
     
    Phoosa and 98tacoma27 like this.
  3. Feb 9, 2017 at 9:34 PM
    #3
    Taco Nation

    Taco Nation Well-Known Member

    Joined:
    Jul 21, 2014
    Member:
    #134354
    Messages:
    1,867
    Gender:
    Male
    First Name:
    Zack
    Clinton, MS
    Vehicle:
    94.5 F350, 77 F150, 74 F100, 11 Jeep Grand Cherokee
    Lift, wheels, tires
    That is without a doubt your problem. Like stated above go ahead and replace them all to greaseable ujoints. 120k out of a ujoint isn't bad. I am lifted and drive kind of hard so mine don't last long at all
     
  4. Feb 9, 2017 at 11:08 PM
    #4
    tacotruck 2.7

    tacotruck 2.7 [OP] Well-Known Member

    Joined:
    Dec 9, 2012
    Member:
    #92775
    Messages:
    334
    Gender:
    Male
    Katy TX
    Vehicle:
    09 cab and a half 2.7
    Can you recomend a qaulity greasable unit. for a street truck comuter no offroad.
     
  5. Feb 9, 2017 at 11:14 PM
    #5
    S.B.

    S.B. Well-Known Member

    Joined:
    Jun 24, 2009
    Member:
    #18838
    Messages:
    3,745
    Gender:
    Male
    First Name:
    Sean
    San Diego
    Vehicle:
    15 Taco
    LT, Glass, CBI Front bumper, NWTI Rear bumper, 35s
    you have exceeded it "service life". not to be a dick but it service life it just how long it lasts, no real set milage. just like our "lifetime" trans fluid, lifetime is just a bs word, doesn't mean a humans life time, just the lifetime of the fluid which could be 60k miles.
     
  6. Feb 9, 2017 at 11:15 PM
    #6
    S.B.

    S.B. Well-Known Member

    Joined:
    Jun 24, 2009
    Member:
    #18838
    Messages:
    3,745
    Gender:
    Male
    First Name:
    Sean
    San Diego
    Vehicle:
    15 Taco
    LT, Glass, CBI Front bumper, NWTI Rear bumper, 35s
    also spicer brand joint are what the driveline shop here sells. never had any problems with spicers
     
  7. Feb 10, 2017 at 5:18 AM
    #7
    Bluesjam

    Bluesjam Well-Known Member

    Joined:
    Oct 30, 2016
    Member:
    #201083
    Messages:
    108
    Gender:
    Male
    First Name:
    Paul
    Vehicle:
    2020 Tacoma SR Magnetic Grey Double Cab 4x4
    With normal highway driving what is the service life of a ujoint?
     
  8. Feb 10, 2017 at 5:33 AM
    #8
    tacotruck 2.7

    tacotruck 2.7 [OP] Well-Known Member

    Joined:
    Dec 9, 2012
    Member:
    #92775
    Messages:
    334
    Gender:
    Male
    Katy TX
    Vehicle:
    09 cab and a half 2.7
    or at least what is the recomeded changeout interval on these u joints.
     
  9. Feb 10, 2017 at 7:25 AM
    #9
    757yotas

    757yotas Well-Known Member

    Joined:
    Feb 5, 2015
    Member:
    #147976
    Messages:
    2,109
    Gender:
    Male
    Virginia
    Vehicle:
    2007 TRD Sport
    ICI Magnum front bumer Rigid LED lighting OME lift 285/70 Nitto Exos 17" Fuel Hostage TRD Exhaust TonnauPro Cover Oil Catch Can Tint Pioneer Nav system Sound System LED lighting Euro headlights Paint
    Moog
     
    98tacoma27 likes this.
  10. Feb 10, 2017 at 7:37 AM
    #10
    10MGM

    10MGM Well-Known Member

    Joined:
    Dec 13, 2009
    Member:
    #27475
    Messages:
    161
    Gender:
    Male
    Vehicle:
    2010 AC MGM 4x4
    As with many components, there is no recommend changeout interval, but they should be inspected every service.
     
    98tacoma27 likes this.
  11. Feb 10, 2017 at 1:56 PM
    #11
    SeafireXV

    SeafireXV Well-Known Member

    Joined:
    Aug 11, 2015
    Member:
    #161536
    Messages:
    134
    Gender:
    Male
    First Name:
    John
    Olathe, KS
    Vehicle:
    2006 Tacoma TRD Sport ACLB
    For good quality U Joints, the Spicer units with the grease zerk can't really be beat for the price. 05-11 4wd Tacoma part is Spicer part 5-213x. Just picked them up for About $22 each at Oreillys.

    Guess what I'm doing this weekend.
     
  12. Feb 10, 2017 at 4:51 PM
    #12
    RedTac0ma

    RedTac0ma Member

    Joined:
    Mar 10, 2016
    Member:
    #180879
    Messages:
    24
    Gender:
    Male
    That is a serviceable drive shaft and spicer makes the ujoints for it. Also it has grease fittings so u can grease it during service
     
  13. Feb 10, 2017 at 10:49 PM
    #13
    mjpjr45

    mjpjr45 Member

    Joined:
    Dec 11, 2016
    Member:
    #204625
    Messages:
    5
    Gender:
    Male
    First Name:
    Michael
    Vehicle:
    2005 Tacoma Prerunner
    Had a horrible vibration in mine. Changed the hanger bearing and all 3 u joints and now smooth as can be.
     
  14. Feb 11, 2017 at 9:15 PM
    #14
    tacotruck 2.7

    tacotruck 2.7 [OP] Well-Known Member

    Joined:
    Dec 9, 2012
    Member:
    #92775
    Messages:
    334
    Gender:
    Male
    Katy TX
    Vehicle:
    09 cab and a half 2.7
    OK WHO EVER SAID that rust stain is whats left of your needle bearings was spot on along with other comments. Picked up 3 USA made Spicer greasable units / Local Oreilys/ all the same pt#. at 24$ a piece and had them changed out this a.m WOW that was definately the problem. Its sooooo smoooth n quiet the way it should be. If you pointed me in the right direction...A SINCERE THANK YOU TO FELLOW FORUM MEMBERS. pictured are the worn and the newly installed u joints. the Chinese units were 16$ with lifetime but nah. buy once cry once. not just that but the Spicers just looked higher qaulity.

    IMG_20170211_225429.jpg
    IMG_20170211_225449.jpg

    IMG_20170211_225501.jpg
    IMG_20170211_151557.jpg
    IMG_20170211_151632.jpg
    IMG_20170211_151608.jpg
     
    Last edited: Feb 11, 2017
    samiam, SeafireXV and reefnfeef like this.
  15. Feb 11, 2017 at 9:19 PM
    #15
    10MGM

    10MGM Well-Known Member

    Joined:
    Dec 13, 2009
    Member:
    #27475
    Messages:
    161
    Gender:
    Male
    Vehicle:
    2010 AC MGM 4x4

Products Discussed in

To Top