Maxtrac Spindle Lift for 2nd Gen Prerunners

Really considering it.

Have BAMF CMC plates otw also

 

@SpruceTaco If i go with the Maxtrac 4" kit and crank the adjustable 5100's in the front to 1.75, and add the 1/4" plate spacer on both sides that will give me a total of 6" up front?

 

nice, I was thinking about some of those someday down the road

 

Ive got to say, Im very jealous of your setup!!!

 

Yeah, I ran mine like that for a while. If you want to be exact it will be 6 1/4".

 

@SpruceTaco FANTASTIC!

 

don't be jealous just get some of your own. think of it this way it's only money. it's not like you can take it with when your gone from this world. so spend while you can and get what you want. and your truck is bad ass

 

Haha!!! I definitely plan on going ADS when that time comes.

 

Anybody know how bad the lean is with just the spindles and nothing in the rear?

 

earlier today all cleaned up

 

look back to page 3 or 4 in this thread and you'll find out. it's definately very noticeable

edit: sorry page 1 thats with 1.5"aal

 

​

 

I guess i am getting new wheels as well. Pro Comp Steel wheels, 16x8" 6/5.5". These have 4.25" backspacing. Maxtrac kit says 4.75 or LESS. Am i good without wheel spacers? If not, what size would i need with these front and back to even out? Also says 17" wheel minimum but i think i can get away with the 16"s still.

 

Also wondering about that @HuntTaco I figure why get the spacers if the backspace on new wheels is less than what it requires. I also wonder if needing 17inch wheels is due to clearing the spindles?

 

4.75" applies to 17" rims, if your 16s will be 4.25BS you should be ok. I ran stock 16s with 1.25" spacers so that equals 4.25" that you say your new rims will have.

 

It's all about clearing the spindles, and not knocking off any balancing weights.

 

Do you guys think it's worth to save up some moola to switch out the struts/shocks with fox/icon/ads/king rather than the 5100's?

 

I just passed a prerunner with the maxtracs and I saw he had some fox shocks and I got jealous that's why I'm asking

 

I can't comment personally from experience but I sure do think that the extra money spent would be worth it.

 

Yeah it's a huge price jump Tthe cheaper option that I was thinking about was just keeping the stock sport billies up front and then get the extended 5100's in the back, that's similar to yours right? @ChadsPride