Clazzio leather seat covers!

still waiting on my covers, finally shipped out almost a week after ordering and they were even in stock so not sure why the hold up..

 

also, on the headrests, make sure you have the clip underneath properly connected. You would think that just the plastic piece goes into the clip but it has to be folded over and the plastic piece and vinyl goes in there. will make it a little tighter. Look at the pics in your directions or go online. It's kind of a pain but it will go in there.

 

I've been very happy with my seat covers.
20k km on them so far.
Driver seat is worn in but not cracked, stained or anything.

 

Did they send you the correct covers? That looks really loose. If it was tighter, it wouldn't have that as much of the "bunched up" corners.

 

Yea.... you possibly may have the wrong product. Because those look awfully loose. Mine never had that many wrinkles with them being half way on.

 

The lines doesn't match. Looks like the wrong covers.

 

I think you got the wrong covers. Mine are completely different. Notice the direction on the seat and the back is a different configuration. I do not have any pictures with me, but scroll through a few pages and you will see the difference I am talking about.

 

Is there padding underneath? Should be about 1/2" of padding on the inside of the covers in places.

 

Hoping @Thesandaddict didn't receive 3rd gen covers for his 2nd gen..

 

Thought it was just me, I ordered all black when they had 2 sets in stock but I'm 3 weeks into it and finally got a shipped update on my order page. Looks like I'll get them next week.

 

Basically the same view / pic as mine side by side. Pic of mine was taken the day I installed them.

 

Holy crap that looks way better. I'll mess with them more tonight. Confirmed that they are the correct covers for a 2015 and not 2016. I think I left the clips off on the bottom as my amps were down there and I couldn't reach them

 

I understand the Amp under the seat issue while getting your covers on.
I have 2 Rockford Fosgate P400's one under each front seat.

 

Clips under the seat doesn't make up for the fit of the Headrest covers. Here's a pic of mine the other direction.

 

I have no idea why the headrests aren't snug. I've double checked the clips and everything is kosher

 

I massaged the headrests more, look a little better, but the backs still have wrinkles next to the center console, and on top of that, the center console is loose, i didn't see anything on how to install that beyond just slipping it over

 

Question. Do you have the TRD Sport Seats? There is a difference between them and the standard Tacoma seats.
That was a specific question asked of me by Clazzio while ordering.
Or maybe you got the covers for the TRD Sport seats and you don't have them?

 

I have the non fold flats....so whatever that is

And I have confirmed with clazzio twice that they are correct for my model, year and trim

 

Let me rephrase my question. Do you have a TRD Sport Tacoma? If yes, then you should have the TRD Sport seats and you would need covers from Clazzio for the TRD Sport seats. If you do have a TRD Sport Tacoma you may have received covers from Clazzio not for The TRD Sport seats. Or the opposite may be true. You do do not have a TRD Sport Tacoma and there for you have the standard Tacoma seat. But you received the covers from Clazzio for the TRD Sport seat. Which by the pic looks more possible. The TRD Sport seat has more side bolstering which would make their covers need to be larger. And would probably have a loose fit if installed on a standard Tacoma seat.

 

I have a trd sport. With non fold flat seats