3rd Gen Maxtrac Spindles

​

 

So the guy sold those blue/black octanes months ago -_-

 

Now I'm looking at these. 20x9 Fuel Beast. The guy isn't sure if the offset he thinks it's either -19 or +19....if it does end up being +19 is that not going to work? Will spacers along with them work?

 

Sorry here's some pictures.

 

Those are sick what size tire?

 

The offset should be stamped on the inside of the wheel on the inner spoke

 

They're 20x9 and currently have 33's on them.

 

how much lift did the leaf pack give you in the back? looks like your slightly nose high hmm?

im asking because your basically have exactly whay i want to do to my sr5 but im leaning towards going with the 6.5" and doing a 2" block with a 2" aal in the rear and the bilsteins all around, just made a deal for 650 for a set of rockstar 2's

 

I want to say it gave me right around 2 inches. I have Billy's all around and the struts with the spindles makes it feel taller than 4". I am too gonna get either a 1-2" block for the rear and bring it up to level it out. I'm not too fond of the bro lean. What wheels are those?

 

rockstar 2 priced about 300 a pop for 20" new

do ou have the billys set above 0?

 

nvm just saw your previous post, strange i didnt think they added any when they arnt turned up
thats good to know tho, i might just do the aal and the spindles with the 5100 and see how it looks and add a rear block and/or the front spacer accordingly

 

Those aren't too bad looking. The original RS I didn't like too much, these look better because they're a little caved into the wheel.

Yea I don't think they do or supposed to but it looks a lot taller in the front than the rear for sure. I kept the stock coils and the struts at 0.

I'm gonna take a look at those Fuel Beast wheels today that the guy is selling and see if they work depending what the offset is. 1k for wheels and the tires aren't bad at all. And if the 20x9 rub them I'll just adjust the struts up to maybe to the 1.75 and do a rear block I'll end up selling my setup soon.

 

Decided not to go with 20x12 just yet. Maybe on my next set. Picking up these babies after work. Fuel Couplers 20x10.

 

What size tire? Do you rub at all?

 

285/70/17 rubs sometimes at a sharp turned to the right or left

 

@TacoTimmy7414 are you running blocks in the back along with your leaf packs? asking because I saw @Leo4x2 's lift and I have ordered pretty much exactly what both of you guys are running minus blocks, yours looks a bit leveled compared to Leo's

 

I'm running Bilstein 5100's with MaxTracs and I'm level with 2" Deaver Leafs in the back. Either his Bilsteins are turned up well above 0 or his Dakars are defective.

 

No sir, no blocks. It's completely level. I wouldn't change a thing. You'll enjoy the outcome.

The only mild problem I have is the dakars squeak after a nice bath and I have to use silicon spray every so often.

 

I've got 5100's adjustable set at 0 with stock coils and the dakars in the rear with 5100 extended length shocks no blocks. I have no idea why the front is sitting higher than the rear. The rear end did raise between 2-3in from stock. But front is still higher.

I do notice that the springs squeak when I get into the truck but that's it. @TacoTimmy7414 @TacoMaxxxx can you send me a picture of the leaf pack on your truck and side shots? Would like to see it compared to my truck.

 

Thats really strange.

I guess since the 3rd gen is 1" higher in front from the factory maybe.