1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

02 Tacoma Wheel Vibration

Discussion in '1st Gen. Tacomas (1995-2004)' started by TRM, Feb 23, 2017.

  1. Feb 23, 2017 at 4:38 PM
    #1
    TRM

    TRM [OP] Well-Known Member

    Joined:
    Mar 12, 2015
    Member:
    #150714
    Messages:
    100
    Gender:
    Male
    First Name:
    Tyler
    Knoxville, TN
    Vehicle:
    15 DCSB TRD Sport 4x4
    Hey All,

    So I just replaced my tires, got an alignment, and new tires balanced. I get a vibration around 65-75mph.

    So I lifted the front end up, and 6 and 12, there is 0 movement, so I assume ball joints good. On my front left wheel, at 3 and 9 there is a slight movement and a clunk. So I pull the wheel, and tug on tie rod, no movement. I try pushing and pulling on everything and no movement. Put the wheel back on, movement.

    Thoughts?
     
  2. Feb 24, 2017 at 5:58 AM
    #2
    fireman1073

    fireman1073 Well-Known Member

    Joined:
    Jan 1, 2016
    Member:
    #173714
    Messages:
    48
    Gender:
    Male
    First Name:
    stephen
    new bedford,mass
    Vehicle:
    06 4runner sport v6
    none yet
    wheel bearing
    oh never mind if no movement at 6 and 12
     
  3. Feb 24, 2017 at 6:20 AM
    #3
    mechanicjon

    mechanicjon They call me "Jonny Stubs"

    Joined:
    Dec 2, 2016
    Member:
    #203828
    Messages:
    10,149
    Gender:
    Male
    First Name:
    Jon
    Scottsdale Arizona
    Vehicle:
    04 Taco SC 4dr SR5 TRD Prerunner
    Supercharged, AEM FIC/6, Meth Inj, ION Alloy's, Radio & Phone steering Wheel controls,Fabtech AAL, Billie's wrapped with 880's , Tundra big brake conversion, bully bars and Pioneer DDin Stereo/dvd with exterrnal usb ports. 290K and going strong.
    Need a second person to look for looseness while you move wheel. Also thats not a good way to check balljoints.
     
  4. Feb 24, 2017 at 7:33 AM
    #4
    Clay_916

    Clay_916 Well-Known Member

    Joined:
    Jul 30, 2015
    Member:
    #160686
    Messages:
    1,501
    Gender:
    Male
    Fort Collins, CO
    Vehicle:
    2000 x-cab 4x4
    5100's, All Pro 3" Standard leafs, 32" KM 2's
    Sounds like your steering wheel is broken. They only last about 100k till the dampeners wear out.
     
  5. Feb 24, 2017 at 11:11 AM
    #5
    Digiratus

    Digiratus Adventurer

    Joined:
    Mar 26, 2010
    Member:
    #34006
    Messages:
    23,828
    Gender:
    Male
    First Name:
    Mike
    Roaming the PNW
    Vehicle:
    The RedHead
    2002 XtraCab TRD 4x4 SCv6 AutoTrans With Lots of Mods ADS COs w/Compression Adjusters Camburg Uniball UCAs Whiteline Lower Control Arm Bushings Kartek 7" Limit Straps Plastics Guy Front Bumpstops Total Chaos Sprindle Gussets Custom Alcan Springs +800 lbs +3" ADS 10" Stroke Triple Bypass w/Resi Rear Shocks Custom Rear Shock Relocate All-Pro U-bolt Flip w/Timbren Bumpstops 4.88 Nitro Gears ARB Front Locker ARB Twin Compressor Black 17x8 Konig Countersteer Type X 285/70r17 Falken A/T3w Gunmetal 16x8 SCS Ray10s 255/85r16 Maxxis Bighorns Limited Edition (Relentless) Elite Front Bumper Smittybilt X2O 10K Winch Diode Dynamics SS3 Sport Selective Yellow Fog Lights in the Bumper Diode Dynamics SS3 Pro 4,000 Kelvin SAE Driving Lights with Clear Lenses on the Bumper Morimoto D2S Projectors XB35 Ballasts + 4300K Bulbs Badland Sliders FrankenFab Tire Carrier Swingout bumper w/kitchen BudBuilt Front & Bellypan Skids BAMF Rear Diff Skid Dometic CFX 55im Fridge/Freezer Alpha II Hardshell RTT Badland Custom Bed Rack Denso 210-0461 105 amp alternator Dual Northstar 24F AGM batteries BlueSea 7622 ML-ACR Battery controller Peak DBI Dual Battery Voltage Monitor Haltech IC-7 Display with Mako Dash Insert Haltech Elite 2500 Standalone ECU Magnuson MP62 Supercharger w/URD 2.2" Pulley Doug Thorley Headers Denso 650cc Fuel Injectors Aeromotive Stealth 340 Fuel Pump TransGo A340F Reprogramming Shift Kit OEM ECU Delete Full A340F Trans Control with the Haltech 2500 ECU 2.5" Magnaflow Hi-Flow CAT Magnaflow 18" Muffler w/Vibrant Resonator 13WL Brake Calipers with OEM Rotors & Pads Braided Steel Brake Lines Kenwood TM-71A Dual Band Ham Radio STI-CO Flex Whip VFH/UHF 1/4 Wave Antenna Midland MTX275 GMRS Radio w/Roof Mount Antenna Pioneer DEH-P9400BH HU Alpine Amps & Type R components (F) and coaxials (R) Wet Okole Seat Covers Weathertech Digital Liners Deck Plate Mod 1" Diff Drop Carrier Bearing Drop
    if you have movement in the 3/9 o'clock direction, my bet is either an inner or an outer TRE or a worn steering rack. I found it easiest to see the movement when the weight of the truck is on the ground. Have a buddy move the steering wheel back and forth while you watch the TREs from below. FWIW, you may also see movement in the steering rack itself.

    I would also add that your 65-75 mph vibe is probably unrelated to steering components. Where do you feel the vibration? In the seat or the floorboards? At those speeds it is most likely a wheel balance issue if you are feeling it in the steering wheel.

    edit: What year is your truck?
     

Products Discussed in

To Top