Moisture in headlight

I recently took the driver side headlight completely out and apart. Let it dry in the Florida sun , a couple of hours later, it was like new. I actually took a air gun for my compressor and blew into it to make sure there was no more droplets. None came out, so I was able to put it all back together. Well, wouldn't you know that later that night I checked it and there was even more moisture than before. I think now the best solution is to invest in a new unit Not from Ebay. I have several on Amazon.

 

How good did you reseal it?

 

Pull apart and reseal with 3m window weld

 

SILICA GEL packs as well.

 

Sure those work but not for long....
One of my BHLM leaked even though i sealed it with silicone I resealed it still leaked... I pulled them apart and used the window weld no more leaks

 

I am not sure if you ever have a low humidity day in FL. But this worked for me in TX. Wait for a sunny low humidity day...Hold a shop vac on the headlight opening in the back...it takes about 15-20 minutes for all the moisture droplets to disappear.

 

I vote get a new one. If it was developing condensation to begin with ripping it apart without sealing again likely would make it worse.

 

drill a VERY fine hole in the lowest corner of the lens, that has worked many times on many different applications.