What have you done to your Tacoma today? 1st Gen Edition

Everybody's out sledding or getting stuck in the snow. I just down here sweating while tilling my garden in short sleeves. Ha ha

 

Went to an abandoned complex. Found a tank inside and a bunch of engines and engine parts.

 

You mean the connectors that go on the battery terminals themselves right?

 

Yall thinks its still good? I ended up buying another one... Didnt realize how easy it would be to bend back

 

Maybe for a spare, I doubt it's still round.
Tire shop will give you shit for it too. But they might still do it.

 

Shoulda towed the tank home!

 

Maybe a wheel shop could repair it back to original?

 

Alternator is fully clipped. Swapped batteries from another car and was reading the same numbers so my bets are on the alternator at this point. Going to pull the alternator and get it tested at vatozone to be sure. If it's the alternator I'll be doing the GM alternator upgrade and rebuild mine ideally for a spare per @Blackdawg s write up.

 

Sounds like a good plan. I swapped for a larger alt as well and kept mine as a spare.

 

Yes sir them. I like they are like $12 at the auto part store.

 

Yeah I was going to try it before I pull the alt. Cheap enough.

 

Cool but not a tank...Looks like something left behind by a movie crew.

 

I looked it up, its a panhard aml, not technically a tank but a french armored truck.

 

Who cares if its not a tank its got a big friggin cannon! I'd take that thing home!

 

Did you use the trailer plugs too? The GM one as well?

 

I did trailer plugs, but I used a Denso alt from a Jaguar... $60 for a 120amp alt.... I don't think it would fit the V6 though.

 

Just found this for easy conversion.

http://www.ebay.com/itm/200850434281?ssPageName=STRK:MEBIDX:IT&fromMakeTrack=true

 

Oh that's clever, wish I could have found one for the round Denso standard plug to the Toyota flat 3.

 

I just finished the light ring or as toyota calls it a "key lamp" mod. It was easy but getting to the wires was a huge PIA!!! It would seriously be easier to take the drivers seat out and lay on your back to perform this mod lol jk.
I swapped in a superbrightleds 360 degree blue #74 led bulb. No resistors needed at all
(some people use them??). I got the dimmable leds in bulk last time so i had 2 left over from the Hvac and glove box light last time. They fade out just like the factory incandescent bulbs do when they shut off nice touch!