Maxtrac Spindle Lift for 2nd Gen Prerunners

Damn! Yeah i don't haul anything and am not going to do bumpers. Just hauling my fishing shit and hunting shit depending on the season

 

I hear ya man, tell her they will save your life.

Those stock leaf packs are prone to snapping and puncturing the fuel tank.

With a 2" or 3" block, the possibility of this happening is much higher, js.

 

@ChadsPride so with this 3 leaf AAL do i/can i use leafs from the existing non-tsb (3 leafs) and add them together? Of take the existing leaf pack out and put these in? Pretty much got a handle on everything else...expect this.

 

Yeah, you will just add the 3 'progressive' leafs to your existing packs

 

You could do this. I would suggest getting the most lift you can via leafs and supplementing the rest with blocks. Ultimately, a custom leaf pack is going to be needed to achieve a 4" rear lift in lieu of blocks. Just keep in mind that the more block you use, the higher chance there is of negative side effects.

 

Awesome! Thanks buddy!

 

I don't think even Dakars or AllPro's are going to get him level with a 6" lift in front.

 

Gotcha, yes, i am NOT going higher than a 3" block. I don't want the bro-lean and i don't want to have any rake. Any i don't do any off-roading. This is merely for looks as this is my daily driver

 

You are very welcome.

Ive got no experience with adding leaves tho....

 

In that case, would putting the snap ring on the 5100's at 0.85 make more sense than the 1.75 ring?

 

If you get the 'progressive' 3 leaf AAL

No way you would need a 3" block also...

How much lift are they saying the 3 leaf progressive AAL gives???

 

How much lift are you looking for? What tires are you trying to clear? Go for as little as possible so you can enjoy a better ride.

 

I'm looking for between 4" and 5" of lift all around and as level as possible front and back. I just got the Mastercraft Courser MXT's in 305/70/16 last week

 

I am running 4" in the front (MaxTrac) and 2" in the back (Deaver U402's) and I sit completely level at 24/24. I barely clear 285/70R17's with Icon UCA's.

 

That is the definition of level, look at the curb under your frame, dead even gap front to rear, bravo.

 

The 3rd generation Tacoma comes with the front end 1" higher than previous generations

Something to keep in mind @HuntTaco

 

Very good point. I missed that.

 

@TacoMaxxxx Your truck is super fly brother.

Very nicely done

 

@TacoMaxxxx Damn that looks good! Well done Sir!