Bussmann RTMR Relay/Fuse Block $215

I am no longer building these blocks. Thank you!

The Bussmann RTMR blocks are good for cleanly wiring multiple accessories into your truck. This will eliminate hooking multiple accessories up to your main battery or continuing to tap into stock wiring harnesses. Compatible with all years of trucks.

The RTMR blocks contain 5 relays and 5 fuse only hook ups. I used 18 gauge trigger wire for the relay switches and 12 gauge wiring for the accessory quick disconnects. All terminals have been soldered. This kit is easy to install and easy to use!

The following components are included in the kit:
-Pre-wired Bussmann RTMR with 35amp relays
-6 foot long switch trigger wiring harness
-Pre-wired switch backing for 5 OTRATTW Contra V switches (lower or upper independent)

What you will need to buy:
-Mounting panel for Bussmann RTMR block
-2 Ground Busbars
-ATM Mini fuses (for running accessories on Bussmann and for fuse taps)
-Fuse Taps
-Breaker or Fuse setup (between battery and Bussmann)
-Power and Ground wiring for between the battery and Bussmann
-Up to 5 OTRATTW switches (Contra V Lower or upper independent)
-Switch Holder

PICTURES OF WHAT THE BOXES WILL LOOK LIKE:



Pre-wired Bussmann RTMR with 35amp relays


6 foot long switch trigger wiring harness


Pre-wired switch backing for 5 OTRATTW switches



MY PERSONAL SETUP on my 2003 Tacoma (SOME ITEMS PICTURED MAY NOT BE INCLUDED IN KIT FOR SALE ABOVE)

 

Sub

 

@Roo1041 where did you get the mounting bracket for the manual 1st gen?

 

Got it from Paranoid Fabrications! Here's their website http://www.paranoidfabrications.com/

 

Thread revive! Main thread is in the 2nd gen section, but haven't been able to sell this last box so BUMP! $215 shipped!

 

Last one sold.

 

Plans to make any more?

 

Not unless I can get at least 4 buyers lined up. I had a hard time selling the two left over from the last "group buy."

 

I'll be in for one when you do a group buy.

 

I will try to get some people interested, and I'll put you on the list.

EDIT: List started on 2nd post.

 

2 more come on now

 

PM sent

 

Alright, I have enough people to order the parts for this round. However, I will be out of town for spring break so I am going to wait a little bit before I order the parts so I will be home when they arrive. PM to confirm you are still interested in a box @Cfincke @vonellis @drr @3slowto4woah

 

Some of the parts have been ordered. I am just waiting to hear back from one person about the breaker/fuse setup they want, and waiting for payment from one other person. @drr @3slowto4woah @Cfincke @vonellis

 

Payment sent

 

All parts have been ordered! I will update when they come in.

 

@desertjunkie760

 

Wiring and switch backings arrived today!

 

Rest of the supplies should be in tomorrow, then I will get to work on these.

 

Got some work done on the boxes this weekend