Built For the Internet...By the Internet Mall Crawler (AR15xAR10's Build Thread)

So...Serious question. Is this thing lifted?

 

The OP will tell you that.

 

The 883's gave you 1.5" of lift?

You are the OP, js.

 

Yuh.



@HeadStrong Off-Road -Marie knows all.

 

Right on, Im probably going to snag a set of 883's with 5100's sooner or later.

Either that or save up for Kings or something

 

Why? You have spindles. No need.

 

Im running 2016 TRD OR shocks and coils and want to switch it up.

 

Truck back togther.

 

​

 

5100s and OME FTMFW

 

No longer on the floor.

 

Haven't driven it yet but just moving it in the driveway, the slop going into gear or reverse is gone.

Also going to swap out the needle zerks on the new ujoints for standard zerks.

I'll drive it all day tomorrow and tighten my bolts a couple of times.

 

​

 

<3

 

Slop in and out of gear is gone.

New CB groned for about 10-12 miles and is now silent. All i can hear is tire hum.

New Ujoints were pretty stiff even after greasing. They are just now starting to losen up nicely after about 20 miles

I did jack the truck up and check all my bolts/nuts, one nut came loose on the Tcase side so i losened all four and put blue loctite on them. Then tightened them as far as i could with two 14mm wrenches end to end

We shall fucking see.

 

​

 

SCOOOOOOOOOOOOOOTER

 

I'm not a member of the Chad Fanboy club. Evidently you haven't noticed. So don't be coy, just know that in my efforts to be a better person, i'm still nice to you because I chose to be. So chill.