DFW BS Thread : ********NEW MEET!! CHECK POST #1*******

I dont have the electronics yet, but I went with the Bussmann fuse block.

 

Nothing too odd on the front if it installs like the hybrid which I would assume. Can't help you on the winch as mine is still in the box

 

Mines the hybrid as well but no hoops

 

I bought the plus last year. I figure I shouldn't be opening the hood too often on the Tacoma. No noticeable droop or loss in performance. The black looked better to me too.

 

I got them since I'll be going into the engine bay more often to get to my OBA setup, once I install it. Got the mount on monday so I just need the time to get it all hooked up.

 

Another group buy.... i have to stay away from meets and forums

 

Figure the sliders and SAS yet?

 

I need to prep sliders and try to paint areas that wont be welded. May use your contact. Will get paint done this weekend

 

Your welding to the frame correct?

 

Correct

 

Send me a pic of the ones you got

 

Ok so here is a link for all you 3rd gen owners....
https://instagram.com/p/BRFVyqng0xj/

Full story here!
https://jalopnik.com/watch-this-truck-running-from-the-cops-launch-into-orbi-1792838677

 

Just have this one pic when i was checking to be sure all parts received. 4 legs and gussets per side, 78" slider

 

Wonder why the mounting plate has holes drilled out?

 

Bolt on option, but i dont want to drill into frame

 

Ya don't. So you want the legs shorter so it sits closer to the frame or just leave the legs the same length and pivot the sliders upwards?

 

https://www.tacomaworld.com/threads/texas-tacoma-stalkers.355826/page-192#post-14530258

 

Cut legs shorter

 

Was just at Autozone dropping off a battery from an old car to get charged/tested. Went to look at the battery terminals because the Neg is cross threaded and wont loosen/tighten all the way. Saw the ones like you linked for $9.99 a pc, gotta love Amazon pricing at 13.49 for 2! I'll prob pick up a cheap one for $3 to replace the negative in the car the batteries for. It doesnt need anything fancy, just cheap and effective.

 

Cut the legs yourself and it will keep the cost down