What Have You Done To Your 3rd Gen Today?

Dang!! 2 ARB's!!!! I am peanut butter and jealous!! I need to pick one up soon.

 

Ice cream and beer, that way me and the kids are happy on the trail. Just kidding I they like beer also.

 

I have these same ones. Good quality. The lock didn't seem to fit snug into my 21mm socket though and I didn't have a 20mm. Still worked though.

 

how are you liking the falkens? im lovin mine so far!

 

Ha ha good call!! I figure with my RTIC 45 and one of these, I'll be all set.

 

I wanted to hold both arb fridges in the box but the factory tie downs were to high to work. So this is what I came up with.

 

Sorry I got the photos wrong

 

Cost was non-existent. I used 2x2 angle cut 2.25" wide and poped 9/16 in them and cut the angles with the ban saw. I had E Trac in the back of my 04 Tacoma and it worked but was a pane to get dirt and twigs out.

 

Does anyone know if a 2nd gen hard topper will work with 3rd gen?

 

Damn. Well if I end up figuring out how to do it I'll let you know. I have a similar situation where someone at the tire shop rubbed up against the truck. Must have had a wrench sticking out or something

 

What is the deal with the metal shop ? Many home owners have saws and drill presses etc. , but a punch press ?
Work ? , Farm ? Always fun to make stuff ones self .

 

Took care of the ugly grill problem until I can buy a nice after market one. Not bad for a $10 investment. Also Painted the front of the radiator with high heat Grill paint. It's not caked on just enough to hide it if you are looking head on at the truck. I did this to my last truck and have never had an issue with cooling.

 

Did you paint it or plastidip??

 

Not any thing more than me and my junk. My iron worker kind of fell in to my lap.

 

Jelly!! I'd love to have an iron worker in my garage!! Ooooh the possibilities!

 

I used Plastidip on the grill about 6 light coats and High temp outdoor grill paint 1200 degree on the radiator.

 

Is it a "Toyota genuine part"?

 

1/8"-1 1/4" up to 1/2" thick. Sheers1/2" by6" and 3" by 3" angle. I have more in to the dies than the machine.

 

How?

 

I have the QuickLIFT Plus. They work great, not sure what the others have that is better.