Code p1500 on 2006 Tacoma

I am getting a code that is p1500 on my '06 Tacoma, which is for either a faulty starter, or has a bad connection. My check engine light has come on and off for about 2 months now, so I'm guessing it is a lose connection. Anyone have suggestions on what I should do to make sure what it is before I go ahead and change out the starter?

 

https://www.tacomaworld.com/threads/throwing-a-code-after-4x4ing.234593/
look at post #6

 

Interesting but doesn't pertain to me. My code popped up randomly without using the 110V inverter

 

http://p1500-toyota.autotroublecode.com/

 

Thanks!

 

you got it. check all connections to the starter, battery and wires going to them and fuse block. before you buy a reman starter

 

Could it also happen from the ignition to the starter?

 

yes, the ignition could be going bad as well. how many miles you got on it?

 

152k KM

94K miles

 

I just noticed your other thread. have you had your alternator tested?

 

Have not, but according to my CPU, the voltage is fine.

 

ok, try cleaning all your connections with some CRC electrical contact cleaner followed buy some dielectric grease

 

Will do. Thanks for your help