Slow Moe's 2016 SR 4 Banger 4x4 5 Speed Access Cab Build & BS Thread!

af!

 

Found my fix for my Husky Weatherbeater mats, so the water doesn't run off the side corner anymore LOL. Still prefer these over it weathertech cause they go way higher and protect the whole foot rest unlike weathertechs that only protect half! Simple but effective!

 

Went to the scrap yard this morning to take some stuff from work! 1,451 pounds of electric motors. The truck and load weighed in at 6,820 with the load on the truck The pallet was an inch too wide to fit between the wheel wells so glot it in as far as I could so the weight was off the tailgate. Put 70lbs in the air bags and it didn't even look like I had a load on it! The Firestone Ride-Rite air bags are well worth the investment!

 

The old girl rolled over 25k last night, it's really 26k cause my tires are 4% bigger.

 

So finally after over a year waiting I got my scooped hood! Thanks to @danpon for the swap! Took care of it this morning! Had a little road trip up to Buffalo NY from Pittsburgh PA!

 

Much better

And thus the stealth TRD Pro build continues

 

One step closer to fooling more people

 

Lol yep!

 

Hey nice build so far. Gotta ask how come you didn't add an exhaust to the intake, header setup. Also any check engine lights with either of those pop up.

 

Nope no check engine lights with the header. I'll add a exhaust eventually just gonna run the stock one out. It looks pretty horrible now after 26,000 miles so I'm sure it won't be long and idk why kind I'll put on it!

 

Oh ok, I thought maybe you weren't putting it on, because people say it helps keep low end torque, but to me having more torque slightly higher in the rpm range is better then having less in the lower range.


Also I recently did your wiper mod this week, and out here WA where it rains on the daily, it made all the difence. Gonna do the fogs next, and I wanted to ask, is there a diffrent way to wire them. I don't want to splice into my ignition.

 

and on the utility they got covers over were speakers would be I may put 6x9sin the floor in front of the 2 cubbys in the floor

 

Nice, for sure living in Washington state you'd defiantly need Intermittent Wipers!

 

Should be able to get a stock fog light harness kit to plug into your harness/fuse box and then splice into it. I'm thinking @fatfurious2 did it recently

 

Huh? What are you taking about? I used a deutch-H11 connector. Its in my build. Something like Starkey..

EDIT:
http://www.starkey-products.com/fog-light-adapters-h10-deutsch-connecters

Used this to plug the deutch connector from the Rigids to the factory fog light harness

 

That would be if I already had fogs. But yes I was looking/thinking something along the lines of buy oem harness and plug and play. However I don't belive my engine harness has the extra wires for the fogs. So I have the go the route core here did.

 

Its typical that there is a hidden plug for it. Some trucks even had the harnesses there (but thats specific to 2nd gens not turd gens)

 

I will do some digging around see if mine has it, if not just do what corey did it. Also, with the tanuuel caver you put on, did you notice better mpg, and was driving on the freeway in 5th gear easier.

 

That's a myth with having a tonneau cover it increases mpg! It stays the same!