What Have You Done To Your 3rd Gen Today?

Washed it and put some Hydro2 on. That stuff looks to work pretty well.

Also put in a pop & lock in the tailgate and mounted my brake controller.

 

Good question...

 

Welcome aboard! Cruise the beach more than TW! It cost less money!

 

Welcome to the Steve from Virginia TW club. We are an elite group. Little chilly in the OBX this weekend. First free mod. Gain clearance. Lose the air dam. Takes less than 5 minutes. 10 or 12 mm socket 3" extension and a ratchet. Put bolts back in so you don't lose them. You will like the appearance.

 

None

 

Installed @CaliRaisedLed pods with @MojaveMadman fog mounts

 

Swapped out my BPF skid for a TRD Pro one


And thought I'd give these white Rigid Side Shooters a go with custom white CBI ditch brackets

 

I placed an order last night on ebay, around $15.00.

 

Interested in selling them? I'm in Dallas. Btw, I tried to send you a PM but it said I couldn't send...?

 

Where is everyone getting the tailgate Pop & Lock? And is it plug-in play?

 

$172 POP & Lock – Power Tailgate Lock for Toyota Tundra, 2007 to 2021 Toyota Tundra, Truck OEM Lock, Anti Theft, Truck Tailgate Lock Replacement, Easy to Install, Made in The USA (PL8547TUN)

https://www.amazon.com/gp/product/B00LST3022/

This is all you need, maybe some extra zip ties. It's not plug in. You have to tap two wires. I did the passenger side door locks, that way it only unlocks with two presses of the unlock button. If you wanted to do just one, tie into the driver side front door locks.

If you route down the passenger side, it can get close to muffler parts, so keep it tucked away and it should be fine. I also went up through the grommet in the floor under the passenger seat. Cut a small hole and shoved it through, sealed up with RTV. I used extreme temp zip ties and did lots of them in case any break.

Anyway, there are several install videos out there it's pretty easy. Took about 30 minutes. Fighting with the mounting bolt for the actuator was the hardest part.

There are two plastic clips that the wires route though for your camera - on the one in the tailgate I had to use a drill and shave a little material off to get them to clamp closed, but it worked fine.

 

Saw this today, I think it's a TRJUANNA PRO
LOL

 

Only things missing are chrome fender flares

 

That's the new ProSportLimited Tacoma....I've been waiting to see one......Too much for me but as long as they like it...

 

I hate chrome !! Lol

 

Finally finished , after a couple of paychecks and t weeks of waiting for everything to be made and shipped ,it is done
Southern style off road slimline bumper
Rigid light bar
Bay Area metal fab grill insert
Rigid fog light kit
Icon stage 4 ,2 inch lift

 

So what I did was, I turned my pro comp wheels into Trd wheels with a little trickery with the caps for about $10! A little bit of farting around with a pocket knife and hair dryer, 30 minutes later, Voila. TRD rims!

 

Here is a pic after a visit to the car wash.

 

I wish I would have went with king shocks what size lift ?