1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site
    Quick Links: Bushing press for XAXIS replacement on SPC UCAs? Blisten 5100s + Eibach coils UCA inquiry Replacing Control Arms & Brakes @ 161K, what else should I do while it's torn apart? Supreme Suspensions lift for 2019 TRD Offroad What is this? and how do I return it back to stock?

Maxtrac Spindle Lift for 2nd Gen Prerunners

Discussion in 'Suspension' started by markmatters, Feb 11, 2012.

Page 522 of 687
  1. Mar 8, 2017 at 6:03 PM
    #10421
    desertrunner24

    #10421
    desertrunner24 Well-Known Member

    Joined:
    Oct 30, 2016
    Member:
    #201101
    Messages:
    3,954
    Gender:
    Male
    First Name:
    Jake
    Fresno , CA
    Vehicle:
    2011 TRD offroad 4x4
    Some
    yeah I've looked to, thought about doing the same kit when the money comes back. but I might throw it all out the window with a SAS. got given some axles and don't know what else to do with them
     
    desertrunner24, Mar 8, 2017
    #10421
    ChadsPride likes this.
  2. Mar 8, 2017 at 6:05 PM
    #10422
    ChadsPride

    #10422
    ChadsPride Tacoma Owner & Enthusiast

    Joined:
    Nov 26, 2014
    Member:
    #143119
    Messages:
    127,315
    Vehicle:
    Sponsored by TacomaWorld.com
    @PapaBear I would just get the TC kit if you could afford it


    But I do love my Maxtracs
     
    ChadsPride, Mar 8, 2017
    #10422
    PapaBear likes this.
  3. Mar 8, 2017 at 6:07 PM
    #10423
    PapaBear

    #10423
    PapaBear Never test how deep the water is with both feet.

    Joined:
    Feb 10, 2014
    Member:
    #122782
    Messages:
    3,563
    Gender:
    Male
    First Name:
    Austin
    SIN CITY
    Vehicle:
    07 DCSB PR 4.0... Aaaand she’s GONE
    Soft Suspension Hard Rubber ®
    If you've got the axles already, and you love going slow :devil:, go SAS, but you've got a prerunner for a reason, make it a true prerunner.
     
    PapaBear, Mar 8, 2017
    #10423
    ChadsPride likes this.
  4. Mar 8, 2017 at 6:10 PM
    #10424
    PapaBear

    #10424
    PapaBear Never test how deep the water is with both feet.

    Joined:
    Feb 10, 2014
    Member:
    #122782
    Messages:
    3,563
    Gender:
    Male
    First Name:
    Austin
    SIN CITY
    Vehicle:
    07 DCSB PR 4.0... Aaaand she’s GONE
    Soft Suspension Hard Rubber ®
    I could but I'm not a fan of TC's kits. If I went with anyone else, I would jump straight to DTF, go big or go home, right?
     
    PapaBear, Mar 8, 2017
    #10424
    ChadsPride[QUOTED] likes this.
  5. Mar 8, 2017 at 6:10 PM
    #10425
    desertrunner24

    #10425
    desertrunner24 Well-Known Member

    Joined:
    Oct 30, 2016
    Member:
    #201101
    Messages:
    3,954
    Gender:
    Male
    First Name:
    Jake
    Fresno , CA
    Vehicle:
    2011 TRD offroad 4x4
    Some
    I know my head is spinning about it. love to have me a LT. a lot of scary fun to be had. but in my neck of the woods there are a lot of rocky trails that are great fun. plus it's hard to keep a beverage between your legs going 90 over whoops lol. I guess I just need both lol
     
    desertrunner24, Mar 8, 2017
    #10425
    ChadsPride likes this.
  6. Mar 8, 2017 at 6:14 PM
    #10426
    ChadsPride

    #10426
    ChadsPride Tacoma Owner & Enthusiast

    Joined:
    Nov 26, 2014
    Member:
    #143119
    Messages:
    127,315
    Vehicle:
    Sponsored by TacomaWorld.com
    Damn, yeah. I would give a nut for that DTF kit.

    That guy makes some REALLY nice stuff
     
    ChadsPride, Mar 8, 2017
    #10426
    PapaBear[QUOTED] likes this.
  7. Mar 8, 2017 at 6:28 PM
    #10427
    PapaBear

    #10427
    PapaBear Never test how deep the water is with both feet.

    Joined:
    Feb 10, 2014
    Member:
    #122782
    Messages:
    3,563
    Gender:
    Male
    First Name:
    Austin
    SIN CITY
    Vehicle:
    07 DCSB PR 4.0... Aaaand she’s GONE
    Soft Suspension Hard Rubber ®
    Ah, I guess you're right. In my honest opinion, LT is as far as I will go with a Taco, 4x4 or not. If I ever want SAS, it's gonna be on a Tundra.
    For sure, though I think 35" are the highest I would ever go on a Taco, the 37"s he runs IMO are asking for trouble, though he does make it work.
     
    PapaBear, Mar 8, 2017
    #10427
    ChadsPride[QUOTED] likes this.
  8. Mar 8, 2017 at 6:50 PM
    #10428
    SpruceTaco

    #10428
    SpruceTaco トヨタ

    Joined:
    May 18, 2012
    Member:
    #79082
    Messages:
    12,284
    Gender:
    Male
    First Name:
    Mike
    Clearwater, FL
    Vehicle:
    2012 Spruce Mica TRD Sport
    Tinted windows 5%, sill protectors, TRD stubby antenna, weathertech in channel rain guards, wheathertech floor mats, BHLM, Truxedo low pro qt, DTRL deleted, anytime backup camera, bed storage locks, fog lights on anytime, tailgate theft deterrent, painted engine cover, relocated horns, l.e.d bed lights, l.e.d engine bay lights, l.e.d lights above cup holders, in glove box, rear cup holder, in console storage & cubby next to steering wheel, Grillcraft grill, 17x8.5 SCS Ray10's, 35x12.50 Nitto Ridge Grapplers, Borla cat back exhaust, map & dome l.e.d's, TEQ badge on grill, Redline tuning hood struts, Maxtrac spindles, SPC Light Racing UCA's, Bilstein 5100's front set at 0 with OME 885's & extended length Bilstein 5100's in the rear, All Pro expedition leaf springs & 2" blocks, extended brake lines front & rear, 1.5" 4crawler drive shaft spacer, Beefed Taco carrier bearing drop, 1.25" spidertrax wheel spacers on rear, Kenwood DNX570 touchscreen with navigation, 30" led light bar in lower bumper opening, 1/4" top plate spacer drivers side, Bullet Proof Fabricating skid plate, Cali Raised ditch lights & Rago f Fabrication brackets, Amp Research power steps, smoked l.e.d 3rd brake light, Wet Okole seat covers, under cab LED'S tied to dome circuit
    Light racing uca's?
     
    SpruceTaco, Mar 8, 2017
    #10428
    ChadsPride likes this.
  9. Mar 9, 2017 at 3:52 PM
    #10429
    Imphedup

    #10429
    Imphedup Trout Addict Whitetail Killer

    Joined:
    Sep 8, 2015
    Member:
    #163750
    Messages:
    589
    Gender:
    Male
    First Name:
    CHAD
    LOWELL,MI
    Vehicle:
    2017 DCLB OR
    Ok gents! How much more lift in rear to get level or a tad of rake 1" 1.5"??
    I'm thinking 1.5" to be safe?
    IMG_0572.jpg
     
    Last edited: Mar 9, 2017
    Imphedup, Mar 9, 2017
    #10429
    desertrunner24 and ChadsPride like this.
  10. Mar 9, 2017 at 3:53 PM
    #10430
    Imphedup

    #10430
    Imphedup Trout Addict Whitetail Killer

    Joined:
    Sep 8, 2015
    Member:
    #163750
    Messages:
    589
    Gender:
    Male
    First Name:
    CHAD
    LOWELL,MI
    Vehicle:
    2017 DCLB OR
    Yes sir!
     
    Imphedup, Mar 9, 2017
    #10430
    ChadsPride likes this.
  11. Mar 9, 2017 at 4:43 PM
    #10431
    SpruceTaco

    #10431
    SpruceTaco トヨタ

    Joined:
    May 18, 2012
    Member:
    #79082
    Messages:
    12,284
    Gender:
    Male
    First Name:
    Mike
    Clearwater, FL
    Vehicle:
    2012 Spruce Mica TRD Sport
    Tinted windows 5%, sill protectors, TRD stubby antenna, weathertech in channel rain guards, wheathertech floor mats, BHLM, Truxedo low pro qt, DTRL deleted, anytime backup camera, bed storage locks, fog lights on anytime, tailgate theft deterrent, painted engine cover, relocated horns, l.e.d bed lights, l.e.d engine bay lights, l.e.d lights above cup holders, in glove box, rear cup holder, in console storage & cubby next to steering wheel, Grillcraft grill, 17x8.5 SCS Ray10's, 35x12.50 Nitto Ridge Grapplers, Borla cat back exhaust, map & dome l.e.d's, TEQ badge on grill, Redline tuning hood struts, Maxtrac spindles, SPC Light Racing UCA's, Bilstein 5100's front set at 0 with OME 885's & extended length Bilstein 5100's in the rear, All Pro expedition leaf springs & 2" blocks, extended brake lines front & rear, 1.5" 4crawler drive shaft spacer, Beefed Taco carrier bearing drop, 1.25" spidertrax wheel spacers on rear, Kenwood DNX570 touchscreen with navigation, 30" led light bar in lower bumper opening, 1/4" top plate spacer drivers side, Bullet Proof Fabricating skid plate, Cali Raised ditch lights & Rago f Fabrication brackets, Amp Research power steps, smoked l.e.d 3rd brake light, Wet Okole seat covers, under cab LED'S tied to dome circuit
    Yeah I took my paper/instructions with me & watched him like a hawk. Haha
     
    SpruceTaco, Mar 9, 2017
    #10431
    ChadsPride likes this.
  12. Mar 9, 2017 at 4:45 PM
    #10432
    SpruceTaco

    #10432
    SpruceTaco トヨタ

    Joined:
    May 18, 2012
    Member:
    #79082
    Messages:
    12,284
    Gender:
    Male
    First Name:
    Mike
    Clearwater, FL
    Vehicle:
    2012 Spruce Mica TRD Sport
    Tinted windows 5%, sill protectors, TRD stubby antenna, weathertech in channel rain guards, wheathertech floor mats, BHLM, Truxedo low pro qt, DTRL deleted, anytime backup camera, bed storage locks, fog lights on anytime, tailgate theft deterrent, painted engine cover, relocated horns, l.e.d bed lights, l.e.d engine bay lights, l.e.d lights above cup holders, in glove box, rear cup holder, in console storage & cubby next to steering wheel, Grillcraft grill, 17x8.5 SCS Ray10's, 35x12.50 Nitto Ridge Grapplers, Borla cat back exhaust, map & dome l.e.d's, TEQ badge on grill, Redline tuning hood struts, Maxtrac spindles, SPC Light Racing UCA's, Bilstein 5100's front set at 0 with OME 885's & extended length Bilstein 5100's in the rear, All Pro expedition leaf springs & 2" blocks, extended brake lines front & rear, 1.5" 4crawler drive shaft spacer, Beefed Taco carrier bearing drop, 1.25" spidertrax wheel spacers on rear, Kenwood DNX570 touchscreen with navigation, 30" led light bar in lower bumper opening, 1/4" top plate spacer drivers side, Bullet Proof Fabricating skid plate, Cali Raised ditch lights & Rago f Fabrication brackets, Amp Research power steps, smoked l.e.d 3rd brake light, Wet Okole seat covers, under cab LED'S tied to dome circuit
    How much lift front & rear right now?
    Measure center of hub to the fender, that will tell you how much you need.
     
    SpruceTaco, Mar 9, 2017
    #10432
    White Horse and ChadsPride like this.
  13. Mar 9, 2017 at 4:45 PM
    #10433
    Fiend13

    #10433
    Fiend13 Well-Known Member

    Joined:
    Jul 3, 2012
    Member:
    #81853
    Messages:
    4,706
    Gender:
    Male
    First Name:
    Chad
    Waddell/Phoenix area
    Vehicle:
    08 TRD O/R DC Prerunner
    Man, I'm still waiting on my install hardware to get in. Starting to get impatient lol. Ordered some Dakar 3" leafs, bushings, carrier bearing drop kit, and extended u bolts. May do the brake lines as well in the rear.
     
    Fiend13, Mar 9, 2017
    #10433
    White Horse and ChadsPride like this.
  14. Mar 9, 2017 at 4:59 PM
    #10434
    Imphedup

    #10434
    Imphedup Trout Addict Whitetail Killer

    Joined:
    Sep 8, 2015
    Member:
    #163750
    Messages:
    589
    Gender:
    Male
    First Name:
    CHAD
    LOWELL,MI
    Vehicle:
    2017 DCLB OR
    26" front 25" rear

    Think I'll go 1.5" topper on order.
     
    Imphedup, Mar 9, 2017
    #10434
    ChadsPride likes this.
  15. Mar 9, 2017 at 5:03 PM
    #10435
    SpruceTaco

    #10435
    SpruceTaco トヨタ

    Joined:
    May 18, 2012
    Member:
    #79082
    Messages:
    12,284
    Gender:
    Male
    First Name:
    Mike
    Clearwater, FL
    Vehicle:
    2012 Spruce Mica TRD Sport
    Tinted windows 5%, sill protectors, TRD stubby antenna, weathertech in channel rain guards, wheathertech floor mats, BHLM, Truxedo low pro qt, DTRL deleted, anytime backup camera, bed storage locks, fog lights on anytime, tailgate theft deterrent, painted engine cover, relocated horns, l.e.d bed lights, l.e.d engine bay lights, l.e.d lights above cup holders, in glove box, rear cup holder, in console storage & cubby next to steering wheel, Grillcraft grill, 17x8.5 SCS Ray10's, 35x12.50 Nitto Ridge Grapplers, Borla cat back exhaust, map & dome l.e.d's, TEQ badge on grill, Redline tuning hood struts, Maxtrac spindles, SPC Light Racing UCA's, Bilstein 5100's front set at 0 with OME 885's & extended length Bilstein 5100's in the rear, All Pro expedition leaf springs & 2" blocks, extended brake lines front & rear, 1.5" 4crawler drive shaft spacer, Beefed Taco carrier bearing drop, 1.25" spidertrax wheel spacers on rear, Kenwood DNX570 touchscreen with navigation, 30" led light bar in lower bumper opening, 1/4" top plate spacer drivers side, Bullet Proof Fabricating skid plate, Cali Raised ditch lights & Rago f Fabrication brackets, Amp Research power steps, smoked l.e.d 3rd brake light, Wet Okole seat covers, under cab LED'S tied to dome circuit
    Just ordered & paid for my son's lift today.
    Front-
    Maxtrac spindles
    Bilstein 5100's (already have these)
    OME 885's
    Light Racing uca's

    Rear-
    Extended length Bilstein 5100's.
    Extended brake lines
    2015 leaf packs with aal (bought from another memeber)- Temporary
    4" blocks- Temporary
    1.25 Spidertrax wheel spacers

    Also working out the details for his wheels.
     
    SpruceTaco, Mar 9, 2017
    #10435
    White Horse and ChadsPride like this.
  16. Mar 9, 2017 at 5:06 PM
    #10436
    Imphedup

    #10436
    Imphedup Trout Addict Whitetail Killer

    Joined:
    Sep 8, 2015
    Member:
    #163750
    Messages:
    589
    Gender:
    Male
    First Name:
    CHAD
    LOWELL,MI
    Vehicle:
    2017 DCLB OR

    Damn I'm looking for someone to adopt me! I don't eat much lol
     
    Imphedup, Mar 9, 2017
    #10436
    White Horse and ChadsPride like this.
  17. Mar 9, 2017 at 5:06 PM
    #10437
    SpruceTaco

    #10437
    SpruceTaco トヨタ

    Joined:
    May 18, 2012
    Member:
    #79082
    Messages:
    12,284
    Gender:
    Male
    First Name:
    Mike
    Clearwater, FL
    Vehicle:
    2012 Spruce Mica TRD Sport
    Tinted windows 5%, sill protectors, TRD stubby antenna, weathertech in channel rain guards, wheathertech floor mats, BHLM, Truxedo low pro qt, DTRL deleted, anytime backup camera, bed storage locks, fog lights on anytime, tailgate theft deterrent, painted engine cover, relocated horns, l.e.d bed lights, l.e.d engine bay lights, l.e.d lights above cup holders, in glove box, rear cup holder, in console storage & cubby next to steering wheel, Grillcraft grill, 17x8.5 SCS Ray10's, 35x12.50 Nitto Ridge Grapplers, Borla cat back exhaust, map & dome l.e.d's, TEQ badge on grill, Redline tuning hood struts, Maxtrac spindles, SPC Light Racing UCA's, Bilstein 5100's front set at 0 with OME 885's & extended length Bilstein 5100's in the rear, All Pro expedition leaf springs & 2" blocks, extended brake lines front & rear, 1.5" 4crawler drive shaft spacer, Beefed Taco carrier bearing drop, 1.25" spidertrax wheel spacers on rear, Kenwood DNX570 touchscreen with navigation, 30" led light bar in lower bumper opening, 1/4" top plate spacer drivers side, Bullet Proof Fabricating skid plate, Cali Raised ditch lights & Rago f Fabrication brackets, Amp Research power steps, smoked l.e.d 3rd brake light, Wet Okole seat covers, under cab LED'S tied to dome circuit
    I'm not sure how much the topper will squat the truck but that seems like a good idea.
     
    SpruceTaco, Mar 9, 2017
    #10437
    ChadsPride likes this.
  18. Mar 9, 2017 at 5:07 PM
    #10438
    SpruceTaco

    #10438
    SpruceTaco トヨタ

    Joined:
    May 18, 2012
    Member:
    #79082
    Messages:
    12,284
    Gender:
    Male
    First Name:
    Mike
    Clearwater, FL
    Vehicle:
    2012 Spruce Mica TRD Sport
    Tinted windows 5%, sill protectors, TRD stubby antenna, weathertech in channel rain guards, wheathertech floor mats, BHLM, Truxedo low pro qt, DTRL deleted, anytime backup camera, bed storage locks, fog lights on anytime, tailgate theft deterrent, painted engine cover, relocated horns, l.e.d bed lights, l.e.d engine bay lights, l.e.d lights above cup holders, in glove box, rear cup holder, in console storage & cubby next to steering wheel, Grillcraft grill, 17x8.5 SCS Ray10's, 35x12.50 Nitto Ridge Grapplers, Borla cat back exhaust, map & dome l.e.d's, TEQ badge on grill, Redline tuning hood struts, Maxtrac spindles, SPC Light Racing UCA's, Bilstein 5100's front set at 0 with OME 885's & extended length Bilstein 5100's in the rear, All Pro expedition leaf springs & 2" blocks, extended brake lines front & rear, 1.5" 4crawler drive shaft spacer, Beefed Taco carrier bearing drop, 1.25" spidertrax wheel spacers on rear, Kenwood DNX570 touchscreen with navigation, 30" led light bar in lower bumper opening, 1/4" top plate spacer drivers side, Bullet Proof Fabricating skid plate, Cali Raised ditch lights & Rago f Fabrication brackets, Amp Research power steps, smoked l.e.d 3rd brake light, Wet Okole seat covers, under cab LED'S tied to dome circuit
    He's paying for it, all mods to be paid for by him. You're welcome to join us but you have to pay your own way. Hahaha
     
    SpruceTaco, Mar 9, 2017
    #10438
    ChadsPride and Imphedup[QUOTED] like this.
  19. Mar 9, 2017 at 5:08 PM
    #10439
    Imphedup

    #10439
    Imphedup Trout Addict Whitetail Killer

    Joined:
    Sep 8, 2015
    Member:
    #163750
    Messages:
    589
    Gender:
    Male
    First Name:
    CHAD
    LOWELL,MI
    Vehicle:
    2017 DCLB OR
    Ya plus I just built a dyi platform with drawer for huntin/ fishin shit
    Looks like Marie is getting more of my money lol
     
    Imphedup, Mar 9, 2017
    #10439
    ChadsPride, SpruceTaco[QUOTED] and Fiend13 like this.
  20. Mar 9, 2017 at 5:12 PM
    #10440
    SpruceTaco

    #10440
    SpruceTaco トヨタ

    Joined:
    May 18, 2012
    Member:
    #79082
    Messages:
    12,284
    Gender:
    Male
    First Name:
    Mike
    Clearwater, FL
    Vehicle:
    2012 Spruce Mica TRD Sport
    Tinted windows 5%, sill protectors, TRD stubby antenna, weathertech in channel rain guards, wheathertech floor mats, BHLM, Truxedo low pro qt, DTRL deleted, anytime backup camera, bed storage locks, fog lights on anytime, tailgate theft deterrent, painted engine cover, relocated horns, l.e.d bed lights, l.e.d engine bay lights, l.e.d lights above cup holders, in glove box, rear cup holder, in console storage & cubby next to steering wheel, Grillcraft grill, 17x8.5 SCS Ray10's, 35x12.50 Nitto Ridge Grapplers, Borla cat back exhaust, map & dome l.e.d's, TEQ badge on grill, Redline tuning hood struts, Maxtrac spindles, SPC Light Racing UCA's, Bilstein 5100's front set at 0 with OME 885's & extended length Bilstein 5100's in the rear, All Pro expedition leaf springs & 2" blocks, extended brake lines front & rear, 1.5" 4crawler drive shaft spacer, Beefed Taco carrier bearing drop, 1.25" spidertrax wheel spacers on rear, Kenwood DNX570 touchscreen with navigation, 30" led light bar in lower bumper opening, 1/4" top plate spacer drivers side, Bullet Proof Fabricating skid plate, Cali Raised ditch lights & Rago f Fabrication brackets, Amp Research power steps, smoked l.e.d 3rd brake light, Wet Okole seat covers, under cab LED'S tied to dome circuit
    I just gave her my son's money, she's gotten my money as well. I'm gonna give her more of my son's once we work out the details for the wheels. I don't mind giving money to a great company though. Haha
     
    SpruceTaco, Mar 9, 2017
    #10440
    HuntTaco and White Horse like this.
Page 522 of 687
To Top