1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

AZ BS Thread 4²0

Discussion in 'Arizona' started by Brian007Taco, May 12, 2016.

  1. Mar 10, 2017 at 11:56 AM
    Techoma

    Techoma This is the Wild, Wild, West!

    Joined:
    Jan 16, 2011
    Member:
    #49351
    Messages:
    7,167
    Gender:
    Male
    First Name:
    John
    Alta Mesa, AZ
    Vehicle:
    Extreme Expo 05 PreRunner
    Dirty fives on Level 8s, 4.88 gears and Harrod Locker on rear. Cab Chop x2, MBRP Cat Back Dual Exhaust w Flowmaster 44 for punch, cut off at rear axle, Throttle Body spacer, Camburg UCA and Coil-Overs, Matrix Spindle lift up front ProComp extended travel on rear w\ Dakar leafs +, Panasonic HU w Front x2 and rear x1 camera, kicker 500 powering 2 JL Audio 10" subs, JL component speakers in front doors and JL audio coaxials in rear doors powered by alpine 600 amp. Cobra all in one CB, Easy Lift hood, and Easy Down Tailgate, Pop N Lock, Dual RGB Halo Projectors, Blacked out tails with HI intensity LED's, Scanguage II, AVID Custom sliders and Hybrid rear bumper, Pelfreybilt Hybrid front, Glock Steering Column Holster, 2 Hella's behind Satoshi on Avid light Bar, Decepticon Badges, 2x 24" LED ropes and 2X 4" HI LEDs to fire up Satoshi w Super Bright green Halo's. Under Hood lighting as well as RGB rock lights. PrinSu Cab/Shell Rack with FreeSpirit hard shell RTT, 28", 2x 20", and 50" LED Bars all controlled by SwitchPros and Weathertechs front and rear.
    I am the KING of destroying Ujoints!! If new tires are bigger, more stress. Forward to reverse in driveway may give a clunk indicating a loose cup... but not till some needle bearings are worn down. FOR ME the vibes always started at highway speeds... in a 5 MPH window. Drive it like that for awhile... 1K ish miles... you should start feeling it when accelerating. A bit after that, the clunks will begin, and then you WILL replace! New shafts are rarely required. Balancing them is also an option. Last time mine was going (Last year here in AZ), I took it to a shop and they did make me a new shaft as it wouldn't balance. HOWEVER, I was replacing my u joints 2X's a year!!!!!! Skinny pedal 4 wheeling it rough on the shaft... so she says.

    Since the rebuild, I have had ZERO issues. That's over 15K miles too!!!!

    VERY GOOD assumption. :)
     
    Brian007Taco[OP] and llibrm like this.
  2. Mar 10, 2017 at 11:57 AM
    Techoma

    Techoma This is the Wild, Wild, West!

    Joined:
    Jan 16, 2011
    Member:
    #49351
    Messages:
    7,167
    Gender:
    Male
    First Name:
    John
    Alta Mesa, AZ
    Vehicle:
    Extreme Expo 05 PreRunner
    Dirty fives on Level 8s, 4.88 gears and Harrod Locker on rear. Cab Chop x2, MBRP Cat Back Dual Exhaust w Flowmaster 44 for punch, cut off at rear axle, Throttle Body spacer, Camburg UCA and Coil-Overs, Matrix Spindle lift up front ProComp extended travel on rear w\ Dakar leafs +, Panasonic HU w Front x2 and rear x1 camera, kicker 500 powering 2 JL Audio 10" subs, JL component speakers in front doors and JL audio coaxials in rear doors powered by alpine 600 amp. Cobra all in one CB, Easy Lift hood, and Easy Down Tailgate, Pop N Lock, Dual RGB Halo Projectors, Blacked out tails with HI intensity LED's, Scanguage II, AVID Custom sliders and Hybrid rear bumper, Pelfreybilt Hybrid front, Glock Steering Column Holster, 2 Hella's behind Satoshi on Avid light Bar, Decepticon Badges, 2x 24" LED ropes and 2X 4" HI LEDs to fire up Satoshi w Super Bright green Halo's. Under Hood lighting as well as RGB rock lights. PrinSu Cab/Shell Rack with FreeSpirit hard shell RTT, 28", 2x 20", and 50" LED Bars all controlled by SwitchPros and Weathertechs front and rear.
    Now put some dirty fives on it and watch the needle move!!!
     
  3. Mar 10, 2017 at 11:59 AM
    XPOTRPR

    XPOTRPR CNC Programmer/Machinist

    Joined:
    May 29, 2011
    Member:
    #57449
    Messages:
    31,171
    Gender:
    Male
    First Name:
    Josh
    Chandler, AZ
    Vehicle:
    [2009 Supercharged Adventuretruck] & [1986 22r Minitruck]
    > BUILD LINKS >
    Do yourself a favor... Leave it alone too. Lol
     
  4. Mar 10, 2017 at 12:00 PM
    a.smo

    a.smo Well-Known Member

    Joined:
    Jun 19, 2014
    Member:
    #132282
    Messages:
    2,808
    Gender:
    Male
    First Name:
    Aaron
    PHX, Az
    Vehicle:
    '99 Trd Xtra Cab 4x4 5sp


    Well... funny you speak of the clunk from forward to reverse and vise versa. She has that as well. She's had that for a bit, few months maybe. But now there's the vibe. Are you thinking new u joint and double cardan?
     
  5. Mar 10, 2017 at 12:01 PM
    christhebassman

    christhebassman Cheese head

    Joined:
    Mar 20, 2015
    Member:
    #151369
    Messages:
    1,171
    Gender:
    Male
    First Name:
    Chris
    Litchfield park
    Vehicle:
    10 White Boosted
    ...but boost
     
  6. Mar 10, 2017 at 12:03 PM
    Jonny22r

    Jonny22r KCCO

    Joined:
    May 31, 2011
    Member:
    #57548
    Messages:
    458
    Gender:
    Male
    First Name:
    Jonny
    Peoria AZ
    Vehicle:
    2014 DCSB SPORT 4x4
    Kings, Methods, blah blah blah

    I have a buddy with a 4 runner just put new wheels and tires and is having the same issue. had them re balanced several times still happens i told them to just drive fast curious to see what it may be though maybe i will pass the info along i believe its a 15 or 16 t4r
     
    a.smo[QUOTED] likes this.
  7. Mar 10, 2017 at 12:05 PM
    Techoma

    Techoma This is the Wild, Wild, West!

    Joined:
    Jan 16, 2011
    Member:
    #49351
    Messages:
    7,167
    Gender:
    Male
    First Name:
    John
    Alta Mesa, AZ
    Vehicle:
    Extreme Expo 05 PreRunner
    Dirty fives on Level 8s, 4.88 gears and Harrod Locker on rear. Cab Chop x2, MBRP Cat Back Dual Exhaust w Flowmaster 44 for punch, cut off at rear axle, Throttle Body spacer, Camburg UCA and Coil-Overs, Matrix Spindle lift up front ProComp extended travel on rear w\ Dakar leafs +, Panasonic HU w Front x2 and rear x1 camera, kicker 500 powering 2 JL Audio 10" subs, JL component speakers in front doors and JL audio coaxials in rear doors powered by alpine 600 amp. Cobra all in one CB, Easy Lift hood, and Easy Down Tailgate, Pop N Lock, Dual RGB Halo Projectors, Blacked out tails with HI intensity LED's, Scanguage II, AVID Custom sliders and Hybrid rear bumper, Pelfreybilt Hybrid front, Glock Steering Column Holster, 2 Hella's behind Satoshi on Avid light Bar, Decepticon Badges, 2x 24" LED ropes and 2X 4" HI LEDs to fire up Satoshi w Super Bright green Halo's. Under Hood lighting as well as RGB rock lights. PrinSu Cab/Shell Rack with FreeSpirit hard shell RTT, 28", 2x 20", and 50" LED Bars all controlled by SwitchPros and Weathertechs front and rear.
    I'm not familiar with the layout of the T4R driveline... But I'm going to guess one u joint, one of the high points. For me on the PreRunner, it was ALWAYS the forward ujoint on the rear shaft, then if I waited a month, the rear ujoint would go as well. Never had an issue with the front shaft uJoint, but did replace the heavily worn CB 2xs.

    And that clunk.... 95% of the time there are needle bearings missing.
     
  8. Mar 10, 2017 at 12:05 PM
    a.smo

    a.smo Well-Known Member

    Joined:
    Jun 19, 2014
    Member:
    #132282
    Messages:
    2,808
    Gender:
    Male
    First Name:
    Aaron
    PHX, Az
    Vehicle:
    '99 Trd Xtra Cab 4x4 5sp
    She has a 97, slightly different and has well over 220k miles. Haha. Thanks though dude!
     
  9. Mar 10, 2017 at 12:07 PM
    Jonny22r

    Jonny22r KCCO

    Joined:
    May 31, 2011
    Member:
    #57548
    Messages:
    458
    Gender:
    Male
    First Name:
    Jonny
    Peoria AZ
    Vehicle:
    2014 DCSB SPORT 4x4
    Kings, Methods, blah blah blah
    haha yeah just a bit. :thumbsup:
     
    a.smo[QUOTED] likes this.
  10. Mar 10, 2017 at 12:07 PM
    a.smo

    a.smo Well-Known Member

    Joined:
    Jun 19, 2014
    Member:
    #132282
    Messages:
    2,808
    Gender:
    Male
    First Name:
    Aaron
    PHX, Az
    Vehicle:
    '99 Trd Xtra Cab 4x4 5sp
    She's a single piece drive shaft. Double cardan by the trans, u joint by the 3rd member.
     
  11. Mar 10, 2017 at 12:09 PM
    AZBACKCOUNTRY

    AZBACKCOUNTRY Well-Known Member

    Joined:
    Dec 30, 2009
    Member:
    #28443
    Messages:
    1,449
    Gender:
    Male
    First Name:
    Doug
    AZ-between the hammer and the anvil
    Vehicle:
    11' AC TRD OFF-ROAD 4x4
    Pelfreybilt front aluminum bumper,AVID off road weld on sliders, RCI Offroad IFS & transmission Skid (steel), RCI LCA skids (aluminum),upper grillcraft, relentless hi clearance bumper,OEM color matched front grill color, ARE MX camper shell, wet Okole realtree seat covers,pelfreybuilt hi lift mounts,ICON 2.5 Coil-overs extended,, ICON tubular UCA's. Allpro expo leafs, SS extended brake lines.Bilstein 110 extended rear shocks.prinsu Cabrac.dwreck pod mounts OKLED 18w cubes.Baja Designs Squadron-R Sport, LED Wide Cornering, Ambers fog/driving 20" IGGY LED Single Row bar.tepui awning,rotopax 2 gallon, TREDs and mount , 100 watt renogy solar panel.victron 20 amp Bluetooth charge controller,Pro comp wheels - cooper st maxx 285/75/16 tires. Skygear bussman fuse relay smart box. ARB 12v plug hard wired for ARB fridge. Pelfreybilt gas tank skid. Smittybilt X2O 10K winch
    I saw a post through expedition portal these guys had the refurb fridges
    http://auburncarrepair.com/
     
    Techoma[QUOTED] likes this.
  12. Mar 10, 2017 at 12:18 PM
    XPOTRPR

    XPOTRPR CNC Programmer/Machinist

    Joined:
    May 29, 2011
    Member:
    #57449
    Messages:
    31,171
    Gender:
    Male
    First Name:
    Josh
    Chandler, AZ
    Vehicle:
    [2009 Supercharged Adventuretruck] & [1986 22r Minitruck]
    > BUILD LINKS >
    It's a slippery slope. Lol
     
  13. Mar 10, 2017 at 12:19 PM
    Techoma

    Techoma This is the Wild, Wild, West!

    Joined:
    Jan 16, 2011
    Member:
    #49351
    Messages:
    7,167
    Gender:
    Male
    First Name:
    John
    Alta Mesa, AZ
    Vehicle:
    Extreme Expo 05 PreRunner
    Dirty fives on Level 8s, 4.88 gears and Harrod Locker on rear. Cab Chop x2, MBRP Cat Back Dual Exhaust w Flowmaster 44 for punch, cut off at rear axle, Throttle Body spacer, Camburg UCA and Coil-Overs, Matrix Spindle lift up front ProComp extended travel on rear w\ Dakar leafs +, Panasonic HU w Front x2 and rear x1 camera, kicker 500 powering 2 JL Audio 10" subs, JL component speakers in front doors and JL audio coaxials in rear doors powered by alpine 600 amp. Cobra all in one CB, Easy Lift hood, and Easy Down Tailgate, Pop N Lock, Dual RGB Halo Projectors, Blacked out tails with HI intensity LED's, Scanguage II, AVID Custom sliders and Hybrid rear bumper, Pelfreybilt Hybrid front, Glock Steering Column Holster, 2 Hella's behind Satoshi on Avid light Bar, Decepticon Badges, 2x 24" LED ropes and 2X 4" HI LEDs to fire up Satoshi w Super Bright green Halo's. Under Hood lighting as well as RGB rock lights. PrinSu Cab/Shell Rack with FreeSpirit hard shell RTT, 28", 2x 20", and 50" LED Bars all controlled by SwitchPros and Weathertechs front and rear.
    I'd GUESS u joint by 3rd member as weakest point. Strictly a guess!

    That's it!!! I was too lazy to call. No info on the website. Calling now. @JerryTaco
     
    AZBACKCOUNTRY[QUOTED] likes this.
  14. Mar 10, 2017 at 12:20 PM
    christhebassman

    christhebassman Cheese head

    Joined:
    Mar 20, 2015
    Member:
    #151369
    Messages:
    1,171
    Gender:
    Male
    First Name:
    Chris
    Litchfield park
    Vehicle:
    10 White Boosted
    Are talking about intake and pulley?
     
  15. Mar 10, 2017 at 12:20 PM
    JerryTaco

    JerryTaco Well-Known Member

    Joined:
    Jan 28, 2013
    Member:
    #96315
    Messages:
    6,862
    wooooot!!! YES... While you're calling, can you find out what they got and text me???? PPPPplllleeeeeeese
     
  16. Mar 10, 2017 at 12:20 PM
    cmack

    cmack Well-Known Member

    Joined:
    Jun 10, 2016
    Member:
    #189259
    Messages:
    7,436
    Vehicle:
    18 Burrito
    x2
     
  17. Mar 10, 2017 at 12:20 PM
    JTB727

    JTB727 Well-Known Member

    Joined:
    Feb 10, 2015
    Member:
    #148353
    Messages:
    2,485
    Gender:
    Male
    First Name:
    Justin
    AZ
    Vehicle:
    35's and a Good Time.

    Put a u joint in it and balance it. The double cardan rarely fails, and if its bad they will know at the balance shop.
     
  18. Mar 10, 2017 at 12:24 PM
    a.smo

    a.smo Well-Known Member

    Joined:
    Jun 19, 2014
    Member:
    #132282
    Messages:
    2,808
    Gender:
    Male
    First Name:
    Aaron
    PHX, Az
    Vehicle:
    '99 Trd Xtra Cab 4x4 5sp
    I figured that would fail first, but wasn't sure.

    Awesome. Thanks man!


    Best place to get u joints?
     
  19. Mar 10, 2017 at 12:26 PM
    JTB727

    JTB727 Well-Known Member

    Joined:
    Feb 10, 2015
    Member:
    #148353
    Messages:
    2,485
    Gender:
    Male
    First Name:
    Justin
    AZ
    Vehicle:
    35's and a Good Time.

    You gonna do the install yourself or just take the shaft too a shop and have them rebuild it?
     
    a.smo[QUOTED] likes this.
  20. Mar 10, 2017 at 12:26 PM
    XPOTRPR

    XPOTRPR CNC Programmer/Machinist

    Joined:
    May 29, 2011
    Member:
    #57449
    Messages:
    31,171
    Gender:
    Male
    First Name:
    Josh
    Chandler, AZ
    Vehicle:
    [2009 Supercharged Adventuretruck] & [1986 22r Minitruck]
    > BUILD LINKS >
    And fuel pump, and headers, and exhaust, and trans work, and cooling, and a tune..

    Im still going.. Lol
     
    Brian007Taco[OP] and MaverickTRD like this.

Products Discussed in

To Top