*CLOSED* RokBlokz Group Buy Spring 2017

In for a set of regulars

 

I want in on the regulars.

 

I loved mine. But had to take the feint off due to rubbing.

 

Whats your setup that caused the rub?

 

IN! Regular size

 

List updated. For all those saying they're in if the discount is right. Your staying off the list until you can be committed. You will have to tag me again if you want to be on the list. But the list is for committed buyers not people on the fence that's gonna let 5% dictate whether they're in or not. I don't want any of this nonsense where I have to hunt people down to place orders just because they changed their mind or can't handle their finances. Your in or out. They're is no "being on the list for now make up my mind later"

 

I agree! We have enough people to get dates. Will let you guys know but it will be soon!

 

33s with ome lift. Only rubbed after I set caster at 2.4 with after market Uca.

 

You must of had the regulars and not the oversized flaps. The oversized ones mount so that the front flaps are outside the wheel well. Where the regular ones mount inside in the factory location.

 

Please explain more.
I have 285s on a stock Pro, have some very minor rub on some plastic I'm working through trimming. Worried these could make that worse.

 

So both the regular and XL can be trimmed in such away so that the mounting hole on the inner side of the flap is actually outside of the fender liner. The 3 holes on the outside of the flap get mounted inside the fender regardless. This gives you a little bit extra room for oversized tires

 

According to Rokblokz site, the oversized flaps mount outside of the wheel well. As in they sit alongside the the fender flare. Keep in mind that pic is of a 2nd gen, yours might be different.

 

It's different for the 3rd Gen. The 3 outside holes are still mounted inside the fender. There is an etched section of the flap that can be cut away and a L bracket for the inner hole that moves it outside of the fender for tire clearance

 

That bottom corner near the cab mount still rubbed when I turned. It was fine driving straight. It won't rub if you run factory caster

 

They still rubbed on the bottom corner on full turn. They were the xl not the regular.

 

@VangaSTL regular.

 

Those of you that were on the fence, I'm tagging you because I finally negotiated terms with RokBlokz. GREAT NEWS!! I was able to get them to consent to 20% BUT we have to get 50 people to participate. That means as of right now we need 20 more people! They made it very clear that 20% WILL NOT happen again this year so if your at all interested now is the time to sign up.

Addressing everyone else. I was originally planning starting the group buy next Monday but in wake of finding out we need 20 more people to get the 20% do we want to wait and see if we can get 50 or go ahead and plan for next monday and risk the discount only being 15%. It's up to you guys, let me know quickly so I can let RokBlokz know.

 

in

 

I think we can hit 50 people, maybe bump it up to next friday? Either way is good with me actually.

 

I agree let's wait.