Icon lift alignment Help.

so over the weekend I installed icon coilovers, icon UCAs, icon rear shocks and All pro stand leafs. I got an alignment done the next day but it still feels like it's driving off. It's not pulling or anything it but if I turn the wheel it feels like I can let go of the wheel and the truck will keep turning. Here are my alignment numbers, maybe they need to be adjusted? Anyone have any experience with this? Also I did not change the tires. 265/70R16

 

Did you figure this out? I'm having an alignment done tomorrow. I am currently experiencing the "let go of the wheel and the truck keeps turning" thing -- am hoping the alignment tomorrow gets rid of that.

 

I had the same thing when I put a stage 5 Icon lift on. Alignment fixed it. Here were my numbers and from what I was told you might need to tell them to set the caster at 2.5-3 degrees. The place I took it to just did it.

 

Should be closer to this. Needs more caster.

Need around 3.0 caster 0 camber and 0 toe. Or as close as you can get to it.

 

THX FELLAS! Damn fast replies.