1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site
    Quick Links: Looking For Better MPG Tires - On Student Budget - 05' 2.7L Prerunner Will these wheels and tires fit with no issues. What's a good tire that gives you the All-terrain/offroad look, but balanced better for more street Tire Question?? Tire Suggestions for 05 tacoma Adjustable air compressor auto off switch.

6 inch lift with 35s

Discussion in 'Wheels & Tires' started by Tattedmom26, Mar 20, 2017.

Page 1 of 3
  1. Mar 20, 2017 at 7:58 AM
    #1
    Tattedmom26

    #1
    Tattedmom26 [OP] Well-Known Member

    Joined:
    Mar 9, 2017
    Member:
    #212811
    Messages:
    78
    Gender:
    Female
    Cameron, NC
    Vehicle:
    2015 Tacoma Prerunner
    I am putting a 6 inch lift on my 2015 4x2 prerunner. I have order the lift, tires and wheels. I am going with 35x12.50R17. My question is... Will I have to do any cutting to get the 35s to fit on my truck. I see that some do and some don't. I am just curious if these tires will fit on my truck without any cutting?
     
    Tattedmom26, Mar 20, 2017
    #1
    ChadsPride likes this.
  2. Mar 20, 2017 at 7:59 AM
    #2
    ChadsPride

    #2
    ChadsPride Tacoma Owner & Enthusiast

    Joined:
    Nov 26, 2014
    Member:
    #143119
    Messages:
    127,315
    Vehicle:
    Sponsored by TacomaWorld.com
    I dont think so.

    Edit: 'fit' is kind of subjective

    They may fit, but will likely rub at full lock.​
     
    ChadsPride, Mar 20, 2017
    #2
    because_wumbo-truck likes this.
  3. Mar 20, 2017 at 2:50 PM
    #3
    Grey 2015

    #3
    Grey 2015 Well-Known Member

    Joined:
    Mar 26, 2016
    Member:
    #182375
    Messages:
    865
    Gender:
    Male
    First Name:
    Skip
    Loxahatchee Florida
    Vehicle:
    2015 Tacoma
    I believe a lot has to do with the offset on the rims you'll have whether they rub or not.
     
    Grey 2015, Mar 20, 2017
    #3
    TTT and ChadsPride like this.
  4. Mar 20, 2017 at 2:55 PM
    #4
    gainman

    #4
    gainman Semper Fi

    Joined:
    Oct 23, 2008
    Member:
    #10185
    Messages:
    3,541
    Gender:
    Male
    SW Florida
    Vehicle:
    2012 TRD Sport Supercharged Manual
    Stuff
    You will have to cut the cab mount. It will rub on turns
     
    gainman, Mar 20, 2017
    #4
    ChadsPride likes this.
  5. Mar 20, 2017 at 2:57 PM
    #5
    Casper66

    #5
    Casper66 grumpy ass

    Joined:
    Apr 3, 2016
    Member:
    #183160
    Messages:
    32,009
    Gender:
    Male
    First Name:
    Chris
    Culpeper, Va.
    Vehicle:
    '15 DCSB TRD Sport 4wd super white (sold) '13 access cab SR5 4wd
    piddly stuff
    @SpruceTaco
     
    Casper66, Mar 20, 2017
    #5
    SpruceTaco and ChadsPride like this.
  6. Mar 20, 2017 at 3:58 PM
    #6
    SpruceTaco

    #6
    SpruceTaco トヨタ

    Joined:
    May 18, 2012
    Member:
    #79082
    Messages:
    12,284
    Gender:
    Male
    First Name:
    Mike
    Clearwater, FL
    Vehicle:
    2012 Spruce Mica TRD Sport
    Tinted windows 5%, sill protectors, TRD stubby antenna, weathertech in channel rain guards, wheathertech floor mats, BHLM, Truxedo low pro qt, DTRL deleted, anytime backup camera, bed storage locks, fog lights on anytime, tailgate theft deterrent, painted engine cover, relocated horns, l.e.d bed lights, l.e.d engine bay lights, l.e.d lights above cup holders, in glove box, rear cup holder, in console storage & cubby next to steering wheel, Grillcraft grill, 17x8.5 SCS Ray10's, 35x12.50 Nitto Ridge Grapplers, Borla cat back exhaust, map & dome l.e.d's, TEQ badge on grill, Redline tuning hood struts, Maxtrac spindles, SPC Light Racing UCA's, Bilstein 5100's front set at 0 with OME 885's & extended length Bilstein 5100's in the rear, All Pro expedition leaf springs & 2" blocks, extended brake lines front & rear, 1.5" 4crawler drive shaft spacer, Beefed Taco carrier bearing drop, 1.25" spidertrax wheel spacers on rear, Kenwood DNX570 touchscreen with navigation, 30" led light bar in lower bumper opening, 1/4" top plate spacer drivers side, Bullet Proof Fabricating skid plate, Cali Raised ditch lights & Rago f Fabrication brackets, Amp Research power steps, smoked l.e.d 3rd brake light, Wet Okole seat covers, under cab LED'S tied to dome circuit
    Plan on trimming the plastic liner & probably the lower inner part of the fender flare. Also it's possible you'll need to do the cab mount chop. I'm at 7" & still rub there occasionally, I still need to do mine.
     
    SpruceTaco, Mar 20, 2017
    #6
    ChadsPride likes this.
  7. Mar 20, 2017 at 5:09 PM
    #7
    Casper66

    #7
    Casper66 grumpy ass

    Joined:
    Apr 3, 2016
    Member:
    #183160
    Messages:
    32,009
    Gender:
    Male
    First Name:
    Chris
    Culpeper, Va.
    Vehicle:
    '15 DCSB TRD Sport 4wd super white (sold) '13 access cab SR5 4wd
    piddly stuff
    If I didn't live like 14 hours from you I'd fix that for you
     
    Casper66, Mar 20, 2017
    #7
    SpruceTaco[QUOTED] likes this.
  8. Mar 20, 2017 at 5:42 PM
    #8
    Pigpen

    #8
    Pigpen My truck is never clean

    Joined:
    Mar 6, 2012
    Member:
    #74319
    Messages:
    9,172
    Gender:
    Male
    First Name:
    Dan
    Northwest Montana
    Vehicle:
    2012 AC Manual 4.0 4x4 Base Model
    Access cab with child seat in the back, yellow wire mod, diff breather relocated to tail light, engine block heater, Leer topper with Yakima tracks and rack, Yakima rack on cab, Ride Rite air bags with Daystar cradles, CBI hidden front hitch, wired for winch front and rear Warn quick connect, Warn x8000i on external carrier, sway bar delete, trailer plug relocated to under bumper, Pelfreybilt IFS and Mid skids, BAMF Tcase skid, ECGS front diff bushing, ARB CKMA12 compressor, 255/85/16 Backcountry MT 3 load E tires on stock steel rims, Toyo M55 tires (same size) on another set of stock steelies, Up2NoGood heated mirror kit, Husky X-act Contour front floor liners, Northstar AGM 24F battery under the hood, Northstar 27F in the cab, Redarc 25 amp DC to DC charger, Pelfreybilt bolt on sliders with kickout and top plates, TRD Pro headlights, Depo smoked tail lights, Energy suspension body mount bushing kit, OME Dakar leaf packs with AAL, OME rear shocks, OME 90021 front shocks with 885 coils, SPC LR UCAs, Up2NoGood 2wd low range mod, 4 Wheel Campers Grandby slide in camper, 4xinnovations high clearance rear bumper, Uniclutch 800 lb/ft clutch
    Cab mount chop for sure. My buddy has a 6" lifted taco on 35s.
     
    Pigpen, Mar 20, 2017
    #8
  9. Mar 20, 2017 at 6:22 PM
    #9
    SpruceTaco

    #9
    SpruceTaco トヨタ

    Joined:
    May 18, 2012
    Member:
    #79082
    Messages:
    12,284
    Gender:
    Male
    First Name:
    Mike
    Clearwater, FL
    Vehicle:
    2012 Spruce Mica TRD Sport
    Tinted windows 5%, sill protectors, TRD stubby antenna, weathertech in channel rain guards, wheathertech floor mats, BHLM, Truxedo low pro qt, DTRL deleted, anytime backup camera, bed storage locks, fog lights on anytime, tailgate theft deterrent, painted engine cover, relocated horns, l.e.d bed lights, l.e.d engine bay lights, l.e.d lights above cup holders, in glove box, rear cup holder, in console storage & cubby next to steering wheel, Grillcraft grill, 17x8.5 SCS Ray10's, 35x12.50 Nitto Ridge Grapplers, Borla cat back exhaust, map & dome l.e.d's, TEQ badge on grill, Redline tuning hood struts, Maxtrac spindles, SPC Light Racing UCA's, Bilstein 5100's front set at 0 with OME 885's & extended length Bilstein 5100's in the rear, All Pro expedition leaf springs & 2" blocks, extended brake lines front & rear, 1.5" 4crawler drive shaft spacer, Beefed Taco carrier bearing drop, 1.25" spidertrax wheel spacers on rear, Kenwood DNX570 touchscreen with navigation, 30" led light bar in lower bumper opening, 1/4" top plate spacer drivers side, Bullet Proof Fabricating skid plate, Cali Raised ditch lights & Rago f Fabrication brackets, Amp Research power steps, smoked l.e.d 3rd brake light, Wet Okole seat covers, under cab LED'S tied to dome circuit
    That would be awesome, I don't have anyone close that can do it. Closest guy is an hour away.
     
    SpruceTaco, Mar 20, 2017
    #9
  10. Mar 20, 2017 at 6:26 PM
    #10
    Casper66

    #10
    Casper66 grumpy ass

    Joined:
    Apr 3, 2016
    Member:
    #183160
    Messages:
    32,009
    Gender:
    Male
    First Name:
    Chris
    Culpeper, Va.
    Vehicle:
    '15 DCSB TRD Sport 4wd super white (sold) '13 access cab SR5 4wd
    piddly stuff
    There's no welders or fab shops in your area? I think I know what you need to buy and learn to do you could make good side money in your area doing cmc;s and slider installs. I think we get 80 to do the weld in pre cut plates, 250 for a full chop, and 250 to istall the sliders
     
    Casper66, Mar 20, 2017
    #10
    SpruceTaco[QUOTED] likes this.
  11. Mar 20, 2017 at 6:34 PM
    #11
    SpruceTaco

    #11
    SpruceTaco トヨタ

    Joined:
    May 18, 2012
    Member:
    #79082
    Messages:
    12,284
    Gender:
    Male
    First Name:
    Mike
    Clearwater, FL
    Vehicle:
    2012 Spruce Mica TRD Sport
    Tinted windows 5%, sill protectors, TRD stubby antenna, weathertech in channel rain guards, wheathertech floor mats, BHLM, Truxedo low pro qt, DTRL deleted, anytime backup camera, bed storage locks, fog lights on anytime, tailgate theft deterrent, painted engine cover, relocated horns, l.e.d bed lights, l.e.d engine bay lights, l.e.d lights above cup holders, in glove box, rear cup holder, in console storage & cubby next to steering wheel, Grillcraft grill, 17x8.5 SCS Ray10's, 35x12.50 Nitto Ridge Grapplers, Borla cat back exhaust, map & dome l.e.d's, TEQ badge on grill, Redline tuning hood struts, Maxtrac spindles, SPC Light Racing UCA's, Bilstein 5100's front set at 0 with OME 885's & extended length Bilstein 5100's in the rear, All Pro expedition leaf springs & 2" blocks, extended brake lines front & rear, 1.5" 4crawler drive shaft spacer, Beefed Taco carrier bearing drop, 1.25" spidertrax wheel spacers on rear, Kenwood DNX570 touchscreen with navigation, 30" led light bar in lower bumper opening, 1/4" top plate spacer drivers side, Bullet Proof Fabricating skid plate, Cali Raised ditch lights & Rago f Fabrication brackets, Amp Research power steps, smoked l.e.d 3rd brake light, Wet Okole seat covers, under cab LED'S tied to dome circuit
    Oh yeah there's shops but I meant like in someone's driveway. Haha
     
    SpruceTaco, Mar 20, 2017
    #11
  12. Mar 20, 2017 at 6:36 PM
    #12
    Casper66

    #12
    Casper66 grumpy ass

    Joined:
    Apr 3, 2016
    Member:
    #183160
    Messages:
    32,009
    Gender:
    Male
    First Name:
    Chris
    Culpeper, Va.
    Vehicle:
    '15 DCSB TRD Sport 4wd super white (sold) '13 access cab SR5 4wd
    piddly stuff
    Swing by a shop and see what they say. It can't hurt and you might get lucky and get a good price. For you it'd be free because I know you'd help me. People who want to stand and watch pay.
     
    Casper66, Mar 20, 2017
    #12
    SpruceTaco[QUOTED] likes this.
  13. Mar 20, 2017 at 6:45 PM
    #13
    SpruceTaco

    #13
    SpruceTaco トヨタ

    Joined:
    May 18, 2012
    Member:
    #79082
    Messages:
    12,284
    Gender:
    Male
    First Name:
    Mike
    Clearwater, FL
    Vehicle:
    2012 Spruce Mica TRD Sport
    Tinted windows 5%, sill protectors, TRD stubby antenna, weathertech in channel rain guards, wheathertech floor mats, BHLM, Truxedo low pro qt, DTRL deleted, anytime backup camera, bed storage locks, fog lights on anytime, tailgate theft deterrent, painted engine cover, relocated horns, l.e.d bed lights, l.e.d engine bay lights, l.e.d lights above cup holders, in glove box, rear cup holder, in console storage & cubby next to steering wheel, Grillcraft grill, 17x8.5 SCS Ray10's, 35x12.50 Nitto Ridge Grapplers, Borla cat back exhaust, map & dome l.e.d's, TEQ badge on grill, Redline tuning hood struts, Maxtrac spindles, SPC Light Racing UCA's, Bilstein 5100's front set at 0 with OME 885's & extended length Bilstein 5100's in the rear, All Pro expedition leaf springs & 2" blocks, extended brake lines front & rear, 1.5" 4crawler drive shaft spacer, Beefed Taco carrier bearing drop, 1.25" spidertrax wheel spacers on rear, Kenwood DNX570 touchscreen with navigation, 30" led light bar in lower bumper opening, 1/4" top plate spacer drivers side, Bullet Proof Fabricating skid plate, Cali Raised ditch lights & Rago f Fabrication brackets, Amp Research power steps, smoked l.e.d 3rd brake light, Wet Okole seat covers, under cab LED'S tied to dome circuit
    Yeah I'm like you, I don't mind helping someone if they're gonna get in there with & get their hands dirty but I don't want to do all the work & definitely don't need an audience. Haha
    I may just have to drive the hour, he said he'd do it for 65 bucks.
     
    SpruceTaco, Mar 20, 2017
    #13
    Casper66[QUOTED] likes this.
  14. Mar 26, 2017 at 3:00 PM
    #14
    Tattedmom26

    #14
    Tattedmom26 [OP] Well-Known Member

    Joined:
    Mar 9, 2017
    Member:
    #212811
    Messages:
    78
    Gender:
    Female
    Cameron, NC
    Vehicle:
    2015 Tacoma Prerunner

    I put the 6 inch lift on my truck with the 35s. Surprisingly i have no rubbing but i do have severe difference in driving. I havent done my alignment yet. Plan on doing so tomorrow. My truck is driving really rough. Takes alot to keep it between the lines. Its pulling and snatching the wheel from me over every little bump groove or curve of the road. Will the alignment take care of alot of the pulling and wandering?
     
    Tattedmom26, Mar 26, 2017
    #14
  15. Mar 26, 2017 at 3:04 PM
    #15
    anthony250f

    #15
    anthony250f Well-Known Member

    Joined:
    Feb 18, 2012
    Member:
    #73066
    Messages:
    16,743
    Gender:
    Male
    First Name:
    Anthony
    San Diego, CA
    Vehicle:
    2008 dcsb trd offroad 4wd
    Ugh yeah get a alignment. Will fix all these issues
     
    anthony250f, Mar 26, 2017
    #15
  16. Mar 26, 2017 at 3:53 PM
    #16
    SpruceTaco

    #16
    SpruceTaco トヨタ

    Joined:
    May 18, 2012
    Member:
    #79082
    Messages:
    12,284
    Gender:
    Male
    First Name:
    Mike
    Clearwater, FL
    Vehicle:
    2012 Spruce Mica TRD Sport
    Tinted windows 5%, sill protectors, TRD stubby antenna, weathertech in channel rain guards, wheathertech floor mats, BHLM, Truxedo low pro qt, DTRL deleted, anytime backup camera, bed storage locks, fog lights on anytime, tailgate theft deterrent, painted engine cover, relocated horns, l.e.d bed lights, l.e.d engine bay lights, l.e.d lights above cup holders, in glove box, rear cup holder, in console storage & cubby next to steering wheel, Grillcraft grill, 17x8.5 SCS Ray10's, 35x12.50 Nitto Ridge Grapplers, Borla cat back exhaust, map & dome l.e.d's, TEQ badge on grill, Redline tuning hood struts, Maxtrac spindles, SPC Light Racing UCA's, Bilstein 5100's front set at 0 with OME 885's & extended length Bilstein 5100's in the rear, All Pro expedition leaf springs & 2" blocks, extended brake lines front & rear, 1.5" 4crawler drive shaft spacer, Beefed Taco carrier bearing drop, 1.25" spidertrax wheel spacers on rear, Kenwood DNX570 touchscreen with navigation, 30" led light bar in lower bumper opening, 1/4" top plate spacer drivers side, Bullet Proof Fabricating skid plate, Cali Raised ditch lights & Rago f Fabrication brackets, Amp Research power steps, smoked l.e.d 3rd brake light, Wet Okole seat covers, under cab LED'S tied to dome circuit
    Yeah for sure, you can't do anything to the front end & expect it to drive good without an alignment. It may start rubbing after the alignment when everything is back in spec.
     
    SpruceTaco, Mar 26, 2017
    #16
  17. Mar 26, 2017 at 3:58 PM
    #17
    Casper66

    #17
    Casper66 grumpy ass

    Joined:
    Apr 3, 2016
    Member:
    #183160
    Messages:
    32,009
    Gender:
    Male
    First Name:
    Chris
    Culpeper, Va.
    Vehicle:
    '15 DCSB TRD Sport 4wd super white (sold) '13 access cab SR5 4wd
    piddly stuff
    When you get alignment try for higher castor numbers. If you can get up around +3 it'll help stabalize your steering and help clearance with regards to the cab mount
     
    Casper66, Mar 26, 2017
    #17
    SpruceTaco likes this.
  18. Mar 26, 2017 at 4:04 PM
    #18
    Inselman1985

    #18
    Inselman1985 Active Member

    Joined:
    May 9, 2014
    Member:
    #129486
    Messages:
    25
    Gender:
    Male
    First Name:
    Colby
    Oklahoma
    Vehicle:
    2014 TRD
    BDS- Suspension 6" lift. 18" Moto Metal 961 red and black. 35 Toyo AT2, led lights.
    I have a little rubbing, but not bad. A lot will also depend on what kind of tires your ordered. Was it all terrain or a mud tire. Most mud tires are also doing to have thicker/bigger treads.
     
    Inselman1985, Mar 26, 2017
    #18
  19. Mar 26, 2017 at 4:18 PM
    #19
    Tattedmom26

    #19
    Tattedmom26 [OP] Well-Known Member

    Joined:
    Mar 9, 2017
    Member:
    #212811
    Messages:
    78
    Gender:
    Female
    Cameron, NC
    Vehicle:
    2015 Tacoma Prerunner
    Hopefully i wont have rubbing after the alignment. I have quite a bit of room so maybe i will get lucky lol
     
    Tattedmom26, Mar 26, 2017
    #19
  20. Mar 26, 2017 at 4:19 PM
    #20
    gainman

    #20
    gainman Semper Fi

    Joined:
    Oct 23, 2008
    Member:
    #10185
    Messages:
    3,541
    Gender:
    Male
    SW Florida
    Vehicle:
    2012 TRD Sport Supercharged Manual
    Stuff
    If you don't rub with 35s something is wrong.
     
    gainman, Mar 26, 2017
    #20
    Inselman1985 likes this.
Page 1 of 3

Products Discussed in

3M VHB 100x200mm~ (4" X8") Double Sided Foam Adhesive Sheet Tape 5952 Automotive Mounting Industrial Grade Very High Bond 5952 (1 Sheets 100x200mm)
$6.99
VIAIR 88P Portable Compressor Kit (12V, 120 Psi, Forup to 33" Tires)
$104.97
ALEOED M12x1.25 mm Self-Locking Nylon Insert Hex Lock Nuts, Pack of 6
$12.99
Schrader 34000 Aluminum Clamp-in Style Valve for TPMS Snap-in Sensor, 25 Count (Pack of 1)
$5.81
Milton S-684-4 1/4" MNPT Male Tank Valve, includes Protective Caps (Pack of 2)
$10.13
Chemical Guys Durafoam Contoured Large Tire Dressing Applicator with Wonder Wave, 2 Pack
$6.99
Super Lube-21030 Synthetic Multi-Purpose Grease, 3 Oz.
$6.99
M-D Building Products 3525 M-D 0 V-Flex Weather-Strip with Adhesive Back, 17 Ft L X 7/8 in W, Polypropylene, White
$8.13
Steelman Color Coded Tread Depth Gauge, Quickly Identifies Amount of Tread on Tires, Reads in MM and 32nds
$7.99
GASHER 2PCS 1/4" Brass Hose Barb, 4-Way Fitting with 8 Clamp Intersection/Liquid/Fuel/Air
$8.99
Milton S-448 Tire Tread Depth Gauge
$8.99
White Knight 5307LBK-4 (Black Chrome) M12x1.50 Factory Style Long Mag (1.87" Height) Lug Nut with Washer for Toyota and Lexus, 4 Pack
$11.07
Air Pressure Switch 90-120 PSI 1/4"-18 NPT DC 24V 12V Air Compressor 90PSI 120PSI
$12.90
WHEEL CONNECT Hub Centric Rings 73.1 to 60.1, Aluminium Alloy Hubrings 60.1 to 73.1 Set of 4, O.D:73.1-I.D:60.1mm. A
$11.99
Toolwiz Lock on Air Chuck Inflate Locking with Clip, 1/4" Brass Portable Tire Inflator Nozzle Presta Valve Adapter Tire Chucks Air Compressor Attatchments Hose End with Barb Connector,2pcs
$5.99
GODESON 88702 Smart Color Coded Tire Tread Depth Gauge 2 pieces(Pack of 1)
$6.49
TEKTON 1/2" Drive x 17 mm Deep 6-Point Socket | SHD23117
$6.00
StanceMagic Small 6 Point Spline Drive Tuner Replacement Socket Key Tool for Aftermarket Six-Spline Wheel Lock Lug Nuts - 17.6mm Inner Diameter - 19mm 3/4 21mm 13/16 Hex Socket Wrench - Black
$6.89
Gorilla Automotive 1921SDKEY Standard Small Diameter Lug Nut Key
$7.65
Die Cut Subdued Matte Black American Flag Sticker 3" X 5" Tactical Military Flag USA Decal Great for Car, Hard Hat. Car Vinyl Window Bumper Decal Sticker (1 Pair)
$7.11
Standard Motor Products TPM2012VK Tire Pressure Monitor System Valve
$7.73
Tire Pressure Gauge for Cars (0-60 PSI, ANSI Certified) Premium Air Pressure Gauge for Tires - Easy to Read Automobile Analog Circular Dial Low PSI Checker Tester
$8.97
Dill 1100K Tire Pressure Monitor Sensor Service Kit
$8.94
GASHER 10 PCS Air Hose Fittings 1/4" Barb x 1/4" FNPT with 10 Pcs Hose Clamp
$14.49
Dupli-Color EBUN01047 Perfect Match Automotive Spray Paint - Universal Flat Black - 8 oz. Aerosol Can
$14.51
Dorman 609-130 Tire Pressure Monitoring System Valve Stem Cap, 50 Pack Universal Fit
$14.83
Performix 11207 Plasti Dip White Multi-Purpose Rubber Coating Aerosol - 11 oz.
$15.15
SunplusTrade 2" x 50' Black Exhaust Heat Wrap Roll for Motorcycle Fiberglass Heat Shield Tape with Stainless Ties
$14.99
100 Psi Pressure Transducer Pressure Sensor Pressure Transducer Sender Sensor 316 Stainless Steel Oil Pressure Transmitter for Oil Fuel Air Water, 1/8"NPT Thread Stainless Steel (100PSI)
$18.00
Gorilla Automotive 21132HT Small Diameter Acorn Chrome 4 Lug Kit (12mm x 1.50 Thread Size) - Pack Of 16
$17.48
Gorilla Automotive 71631NBC Acorn Black Chrome Wheel Locks (12mm x 1.50 Thread Size) Pack of 4
$17.48
Amazing Roll-Off Multi-Purpose Cleaner 32 oz.
$18.86
Gorilla Automotive 108-7810 Wheel Hub Centric Rings (108mm OD x 78.10mm ID) - Pack of 4
$17.98
Gorilla Automotive 91137BCB Acorn Bulge Black Chrome Lug Nuts (12mm x 1.50 Thread Size)
$12.34
Toyota Genuine Lug Nut with Washer
$11.99
DCVAMOUS Alloy Aluminum Hub Centric Rings 110 to 106, Set of 4 - Performance Spigot Hubrings fit 106mm Vehicle Hub and 110mm Wheel Center Bore Compatible with Toyota 4-Runner Tacoma
$12.99
Adam's Polishes Block Applicator (6 Pack) Trim Dressing & Tire Shine Applicator Pad for Car Detailing | Reusable & Customizable Durafoam | for Use After Car Wash Wheel Cleaner
$13.19
Adam's Tire Shine 16oz - Easy to Use Spray Tire Dressing W/ SiO2 for Glossy Wet Tire Look w/No Sling | Works on Rubber, Vinyl & Plastic | USA Made
$13.59
Toyota Accessories (PT385-30071) TRD Wheel Cap
$13.93
Autrends Automatic Tire Deflator, 6-30 PSI Tyre Deflator Kit with Storage Bag for Car, Tires, Truck, Motorcycle, Jeep and ATV (4 Pack)
$13.99
Detail Factory - ProGrip Tire Brush - Ergonomic ProGrip Handle, Stiff Synthetic Bristles, Ergonomic Design, Clean Your Tires with Ease - Red
$15.95
3M Double Sided Tape Mounting Tape Heavy Duty, 164 FT Length, 0.4" Width for 5050 5630 SMD LED Strip Lights (10mm Tape Strong Adhesive)…
$14.75
To Top