Bussmann RTMR mount for first gens

Anyone have a good source for a Bussmann RTMR mount for first gens? I've seen a bunch of second gen stuff online, but I'm good with my 2000

 

Are you talking about a mounting plate for the fuse block? Would be pretty easy to fab up something to hold it, here is one a TW member sells:
https://www.paranoidfabrications.co...products/1st-gen-tacoma-bussmann-relay-holder

 

The problem with the 98-00s (and maybe earlier) is that they have the large charcoal canister where everyone mounts their fuse blocks.

 

Here's where I mounted mine on my 1998

 

Thanks, that is exactly the type of thing I'm looking for (I just don't have the tools to fab myself), but @nzbrock hit the nail on the head - my charcoal canister is there, so I am hoping someone fabs a bracket that sits over the fuse box or something...

Thanks. If only I didn't have my ABS ECU there (actually, if I didn't have ABS there, that's where I'd mount my ARB compressor!). So little room in my engine compartment.

 

I mounted a blue sea fuse block just behind the charcoal canister. Unfortunately I then had to move it due to my redline hood struts.
The RTMR actually has a smaller footprint, although it looks taller with the case.

Here is how I had it mounted. I now have it vertical on the firewall, it just makes it harder to screw the terminals down.

 

Ended up fabbing my own bracket, squeezing it in on the passenger side, sharing some existing mounting locations. Wrote it up in my build thread, and it came out pretty great - hahaha - at least, I think so.

https://www.tacomaworld.com/threads...ld-and-adventures.484602/page-3#post-15187144