1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Whats the torque spec for this

Discussion in 'Technical Chat' started by scrapedface, Feb 23, 2010.

  1. Feb 23, 2010 at 9:56 AM
    #1
    scrapedface

    scrapedface [OP] Well-Known Member

    Joined:
    Dec 3, 2008
    Member:
    #11268
    Messages:
    131
    Gender:
    Male
    vacaville, ca
    Vehicle:
    2008 2.7 liter 4wd tacoma
    ipod charger and aux cable, scanguage 2, wet okole seat covers, 35% tint, toytec ultimate set at 2.5"
    Whats the torque for the 2 outboard bolts on the lower control arm on a 2nd gen taco. its the two bolts closest to the wheel on the bottom.
     
  2. Feb 23, 2010 at 10:16 AM
    #2
    scrapedface

    scrapedface [OP] Well-Known Member

    Joined:
    Dec 3, 2008
    Member:
    #11268
    Messages:
    131
    Gender:
    Male
    vacaville, ca
    Vehicle:
    2008 2.7 liter 4wd tacoma
    ipod charger and aux cable, scanguage 2, wet okole seat covers, 35% tint, toytec ultimate set at 2.5"
  3. Feb 24, 2010 at 7:47 PM
    #3
    kevhogaz

    kevhogaz Low Speed, High Drag

    Joined:
    Sep 6, 2008
    Member:
    #9055
    Messages:
    323
    Gender:
    Male
    Queen Creek, Arizona
    Vehicle:
    SR5 PreRunner
    3" lift front & rear, Air Raid Intake System
    Tight as a mofo, just shy of stripping.

    I show 103 ft. lbs. for those bolts. Your welcome.
     
  4. Feb 25, 2010 at 3:08 AM
    #4
    DDD

    DDD Shine bright like a hymen

    Joined:
    Mar 6, 2009
    Member:
    #14416
    Messages:
    2,303
    Gender:
    Male
    First Name:
    Derek
    Santa Clarita, CA
    I think that is the "Front Lower Ball Joint Attachment X Steering Knuckle" if so, its 118 ft. lbs.
     
  5. Feb 25, 2010 at 12:34 PM
    #5
    scrapedface

    scrapedface [OP] Well-Known Member

    Joined:
    Dec 3, 2008
    Member:
    #11268
    Messages:
    131
    Gender:
    Male
    vacaville, ca
    Vehicle:
    2008 2.7 liter 4wd tacoma
    ipod charger and aux cable, scanguage 2, wet okole seat covers, 35% tint, toytec ultimate set at 2.5"
    Damn that is tight as a mofo. Thanks guys
     
  6. Feb 25, 2010 at 12:37 PM
    #6
    08pretaco

    08pretaco Well-Known Member

    Joined:
    Sep 26, 2008
    Member:
    #9502
    Messages:
    9,321
    Gender:
    Male
    az
    Vehicle:
    2014 Tundra 4x4 CM 5.7L SR5
    @ADSracingshocks - F 3 point ohh / R 2.5 - w/clickers @camburgracing - uniball UCA @rigidindustries - 40" amber/white split, Dually XL, D2 @coopertires - 35/12.5/17 STT MAXX @bayareametalfab - low pro bed rack @toyotausa - 17" rock warrior @sdhqoffroad - rock sliders, a-pillar @hondogarage / @apple / @gaiagps / @dualgps- navigation @wheelersoffroadinc - superbumps
    whats wrong? why you need to tighten them? i dont think they should be coming loose unless you tinkered with it
     
  7. Feb 25, 2010 at 12:42 PM
    #7
    scrapedface

    scrapedface [OP] Well-Known Member

    Joined:
    Dec 3, 2008
    Member:
    #11268
    Messages:
    131
    Gender:
    Male
    vacaville, ca
    Vehicle:
    2008 2.7 liter 4wd tacoma
    ipod charger and aux cable, scanguage 2, wet okole seat covers, 35% tint, toytec ultimate set at 2.5"
    I took them off to put on my suspension lift
     
  8. Feb 25, 2010 at 12:57 PM
    #8
    08pretaco

    08pretaco Well-Known Member

    Joined:
    Sep 26, 2008
    Member:
    #9502
    Messages:
    9,321
    Gender:
    Male
    az
    Vehicle:
    2014 Tundra 4x4 CM 5.7L SR5
    @ADSracingshocks - F 3 point ohh / R 2.5 - w/clickers @camburgracing - uniball UCA @rigidindustries - 40" amber/white split, Dually XL, D2 @coopertires - 35/12.5/17 STT MAXX @bayareametalfab - low pro bed rack @toyotausa - 17" rock warrior @sdhqoffroad - rock sliders, a-pillar @hondogarage / @apple / @gaiagps / @dualgps- navigation @wheelersoffroadinc - superbumps
    oh.. what on earth did you put on that you needed to take that off?
     
  9. Feb 25, 2010 at 4:34 PM
    #9
    kevhogaz

    kevhogaz Low Speed, High Drag

    Joined:
    Sep 6, 2008
    Member:
    #9055
    Messages:
    323
    Gender:
    Male
    Queen Creek, Arizona
    Vehicle:
    SR5 PreRunner
    3" lift front & rear, Air Raid Intake System
    When you put on Bilstein's, it's easier to remove the lower ball joint, so you can pull the lower control arm down far enough to get the shock back in.
     
  10. Feb 25, 2010 at 5:14 PM
    #10
    08pretaco

    08pretaco Well-Known Member

    Joined:
    Sep 26, 2008
    Member:
    #9502
    Messages:
    9,321
    Gender:
    Male
    az
    Vehicle:
    2014 Tundra 4x4 CM 5.7L SR5
    @ADSracingshocks - F 3 point ohh / R 2.5 - w/clickers @camburgracing - uniball UCA @rigidindustries - 40" amber/white split, Dually XL, D2 @coopertires - 35/12.5/17 STT MAXX @bayareametalfab - low pro bed rack @toyotausa - 17" rock warrior @sdhqoffroad - rock sliders, a-pillar @hondogarage / @apple / @gaiagps / @dualgps- navigation @wheelersoffroadinc - superbumps
    If it makes it easier by all mean!
     
  11. Feb 25, 2010 at 5:16 PM
    #11
    colinb17

    colinb17 If at first you don't succeed, don't try skydiving

    Joined:
    Jan 6, 2008
    Member:
    #4127
    Messages:
    19,166
    Gender:
    Male
    First Name:
    Colin
    Charleston, SC
    Vehicle:
    '07 TRD Sport 4x4
    Build thread in sig...
    thank god...i guessed and torqued mine to 120 after the lift. got lucky on that one lol
     

Products Discussed in

To Top