What Have You Done To Your 2nd Gen Tacoma Today?

A few weeks ago I had 5100s installed and afterward, had the cyclical grinding sound that many get after lifting their Taco. Present in 2WD, went away in 4WD. Considered the ECGS bushing but was quoted about $400 at the off-road shop, which I wasn't too excited to pay since I just dropped a couple grand on shocks and new tires.

Some super awesome TW member posted info about TSB-0026-15 which is basically the Toyota version of the ECGS bushing. I printed that bad boy off and brought it in, and long story longer, my dealer did it without question and it actually fixed the vibrations. At no charge! Woot! I was really worried that since I had altered the suspension, it wouldn't qualify. I even dreamed the night before that they handed me a huge bill.

If you have this problem, it's worth taking to your dealership. They will replace the needle bearing on the left side of the front differential. I believe the ECGS bushing would work too if you have the tools and experience.

 

Only problem with that is, it's likely to fail again.

 

Is that the same as durian? Durian is the most stinky fruit I've ever encountered.... I salute you if you eat it.

 

What's your experience with the factory tsb?
I had mine done about 20000mi ago, I have had no problems, and it didn't cost me anything. ...

 

I wondered about that. I saw pics of the original bushing, the new Toyota replacement, and the ECGS one. ECGS is a beefier looking part. The TSB is good for 60,000 miles so that gives me 20,000 to go. If it does fail, I would think they'd repair it again? I'm going to remain optimistic.

 

I'll take the Bull Bar as long as it's not scratched all to hell.

 

Those are the factory side step on your truck?

 

Yea they might not be top notch in build but if they do ever fog/leak I'll just seal them up with what I use to seal all my retrofits. Or maybe put an extra seal in them now for peace of mind lol.

Nice! They look good on yours

 

will keep this in mind

 

Yes.

 

None, i cant trust the local dealers. Isn't it the same bearing though?

 

When I bought my truck they put on the side tubes which are cool, but I am not a fan of the gap. Not a hard core off-roader but the family constantly uses them to get into the truck, so removing them isn't an option. I just like the tighter cleaner look of the Toyota ones. Thanks!

 

Glad I could help!

 

It's not at all the same taste or smell, but they do look similar. And durian actually tastes pretty good once you get past the smell!

 

Keep me posted

 

It's not the same bearing, the tolerances are tighter, I don't have the specs handy but as I said, haven't had any problems since tsb was done, and I have ~3" lift!

 

That's good to hear! I'm still doing the ECGS bushing.

 

#TeamTomTwo

Good luck brother may you and your family be blessed through this process

 

It sucks folks don't feel they can trust their dealer. I've been lucky and have had a good relationship with mine for over 10 years and 2 Tacos. I golf with my sales guy so that helps!

 

Yesterday I installed a USA Spec Ipod/Iphone Adapter, did the hose clamp mod for the tailgate, and put in an OEM color Matched grill. Today I replaced the foot rest under the E-Brake pedal that was missing.