Show off those 35's on 3rd gens

They said they were fine

 

Any of you guys running 35s on 18s? I have a brand new set of 35x12.50r18 trail grapplers & wondering how to slap them onto my '17 DCSB TRD OR... been looking at a bunch of lifts. What are you guys running?

 

Most of us are running 16's and 17's with 3in lifts with upper control arms. Not sure about the other guys with DB lifts

 

Most of you guys didn't regear at all right?

 

Not yet but it is in the works for me.

 

18x10 with 35x12.5 6 inch lift no re gear

 

I've had this issue and I've only gone up to 32's and wheel spacers! I can't imagine what it would be like with 35's.

 

I've had mine since April 2016 (no body lift) and I'll be upgrading once I get home from Saudi

 

Bump.

Specifically looking for more pics, but with aftermarket front bumpers and 35s. I'm sure the bumpers help a lot with clearance. Just add more caster to bring it forward more.

 

Got a bumper now

 

Whats your caster set at? Did it help clear the front more?

 

I don't recall, but the shop pulled them as far forward as possible. Actually lost room because I trimmed my fenders so now the bumper sits further back. I want to trim my bumper to match the flare but I don't rub. So not a big deal just doesn't sit flush

 

Dammmmn, looks really good. What lift? I'm trying to decide what lift to go with but leary of going that high. Looks killa!

 

https://www.tacomaworld.com/threads...n-control-kicks-on-help.474972/#post-14383005

 

I just had mine reset by the dealer. VSS light had been on since I had it aligned after the lift.

And yes, mine kicks in all the time. Sounds like something is going to break. If I could pull the traction control fuse, and not loose ABS, I would.

Main reason I had dealer reset VSS was because I almost rear ended a car when it was raining and the front tires locked up while braking, ABS didn't work.

When I was at the dealer there was a girl there with a lifted 2nd gen, and the dealer had reset her VSS 3 times so far and the light keeps coming on and the VSS isn't working.

 

@300AACTaco Newer trucks than you running 35's

 

Anyone running 35s with a 2.5" Lift? Wanna know how much cutting I need to do.

 

A lot

 

Sorry to be blunt. It's a lot of work. I still rub. I even rub the top of the fender when stuffed. You need to remove fender well liner, cut about 2in from fenders and flares, huge cab mount, and beat the pinch welds

 

Problem has been fixed I had been running the wrong knuckle kit is perfect